Question about axle nut size? S13

[thejapino]

Hey folks, off the top of your heads, what size socket would I need to remove the nuts holding the rear axles in place at the hub? Im thinking 30mm. Am I wrong? Your help is appreciated!:aw:

[Agent_S13]

Hey folks, off the top of your heads, what size socket would I need to remove the nuts holding the rear axles in place at the hub? Im thinking 30mm. Am I wrong? Your help is appreciated!:aw:

I think its 32mm.

Best thing to do would be to search to confirm though. Was over a year ago since I removed 'em for my 5-lug but you can find the answer here. Its been covered before.

Don't forget the cotter pins... unless that's just for the fronts.

-Aaron
'91 240sx coupe

[Flybert]

36mm

a;dslkfjasd;fljkas;f

[drew935]

26mm front/ 32mm rear...oh shoot is it 36mm...well I did look at the FSM and it doesn't say :duh:

[Flybert]

36mm 36mm 36mm

[SochBAT]

36MM.

Kinda big.

had to swap out my axles, and i've still got the socket.

Did i mention 36MM?

[SaskS14]

S13 30mm Front and 36mm Rear

S14 32mm Front and 36mm Rear

[thejapino]

36mm for the rear! Thanks folks! Right on for the quick reply. I didn't want to buy all these axle sockets and then have to go back to the store to return some! Thanks again!

Lock
lok
loc
lock

[chlatboy]

yup 36 is it. I would know, i had to change sochbats axles myself! You fail SOCHBAT!!!

[Kahl]

if you can't get a 36mm use "1 inch 7/16", might help you guys with imperial stuff.