18x11.5 -21..18x10.5-6 offset need help.

[sofobulous]

18x11.5 -21..18x10.5-6 offset will it fit s14or s13 ?? and what wide body or flares i can get away with these wheels?? thanks ahead.:)

[blackflag_Rms13]

BN Sports ~

[Hondamatic]

the wont fit any fenders
youll need the 50mm rears at least for the 11.5

for the front youll need some crazy bn sports blister fenders or something

edit: lots of camber in rear too , maybe maxed out camber

[chmercer]

yes it will fit, need whatever brand rear overs and somthing up front, frp fenders, arches, pulled stock, etc. also need some camber like maybe 3ish

my 10 -7 fronts are sunk with z arches, i need to space it. dont need that much extra width up front.

that front i think will rub at lock though, probably need to crank the caster up

hondamatic is a retard and dosent have wheels close to that spec, i do, listen to me

[sofobulous]

yes it will fit, need whatever brand rear overs and somthing up front, frp fenders, arches, pulled stock, etc. also need some camber like maybe 3ish

my 10 -7 fronts are sunk with z arches, i need to space it. dont need that much extra width up front.

that front i think will rub at lock though, probably need to crank the caster up

hondamatic is a retard and dosent have wheels close to that spec, i do, listen to me

THanks for the input :) . Do happen to have pics of your set up?.

[sideview_180sx]

you are an idiot in my opinion for getting wheels or ordering wheels like this, only to ask if they will fit or not. obviously you need to size up your entire project and see what needs to be done to fit these wheels. look up what jdmrice version 1 looked like. then see if you really want to have wheels and deal with the added attention from being in socal riceville central. yo should just start off with at least 9s all around so you can see with what problems and other stuff you deal with having 9s at all 4-corners. before you jump up to that size. especially if this will even attempt at being a street or daily driven car. riverside ain't the business for quality roads.

[chmercer]

http://img144.imageshack.us/img144/9272/img05827bc.jpg

[sofobulous]

you are an idiot in my opinion for getting wheels or ordering wheels like this, only to ask if they will fit or not. obviously you need to size up your entire project and see what needs to be done to fit these wheels. look up what jdmrice version 1 looked like. then see if you really want to have wheels and deal with the added attention from being in socal riceville central. yo should just start off with at least 9s all around so you can see with what problems and other stuff you deal with having 9s at all 4-corners. before you jump up to that size. especially if this will even attempt at being a street or daily driven car. riverside ain't the business for quality roads.


So u really think everybody in riverside are ricey?? cause if u do your probably hangin out in the wrong area and yeah wheels was given not ordered or purchase Funny...:bash:

[CrazyIvan]

On my s13 I have 18x10 -3 spaced out to -23 on the front w/ 30mm flares and max neg. camber, on the rear I have 18x13 -7 spaced to -17 w/ 50mm flares and alot of neg. camber (not maxed out), so if you know what you're doing you shouldnt have any problems making those fit.

[sideview_180sx]

yes they are ricey i live there and have seen the ricers and bros posers and full of those who know what SRs and cops who aren't idiots. besides you need to know what you are doin before you get in way over your head. chmercer is awesome since the days before the blue vinyl and the red kit with fasteners.

[MURPHY]

chmercer whats your rear setup?
and ivan any pics? or i think ive seen yours but not to sure which one it is exactly.

im just debating going to big and then having track wheels that look like +40 offset on a wide fender. ya know

[Macadoshus]

Rears shouldn't be too bad.

Up front you will have to worry about rubbing at full lock as chmercer said. I have similar fitment up front on S13. 18x10.5 +3. Biggest issue is clearing the coilover, but you shouldn't have that much of an issue at -6. See below. Barely clears, probably run like a 3mm spacer to be safe.

http://static.flickr.com/129/320123851_604cf34a3a.jpg

[chmercer]

rear is 12j -20

[yokotas13]

hehe whore those pics Mac!!!

[chmercer]

hey, i took that picture!

http://i5.photobucket.com/albums/y193/rhs13/SIG.jpg

[smelly240]

Rears shouldn't be too bad.

Up front you will have to worry about rubbing at full lock as chmercer said. I have similar fitment up front on S13. 18x10.5 +3. Biggest issue is clearing the coilover, but you shouldn't have that much of an issue at -6. See below. Barely clears, probably run like a 3mm spacer to be safe.

http://static.flickr.com/129/320123851_604cf34a3a.jpg

do i see one of those huge equips there? :D and you better watermark ur pics - yokotas13 will steal em ;) L0L - [email protected] yok!

[yokotas13]

hey, i took that picture!

http://i5.photobucket.com/albums/y193/rhs13/SIG.jpg
n oi sent him those wheels

i have 3 more in my spare bedroom to send lol

[Koopa Troopa]

So the next big thing in the states is buying wheels and making a 240SX a Vip a car? What's next? Putting pumps and dayton's on your Honda Legend and representin 098 Oki style?

[twofourzerosx]

its acura legend u angry jap.... well in america neway
lol jk ;)

[datboibrad]

So the next big thing in the states is buying wheels and making a 240SX a Vip a car? What's next? Putting pumps and dayton's on your Honda Legend and representin 098 Oki style?
how about toning down the haterade a little. its not like your car is mad original either.

[chmercer]

big wheels = vip car duh

[Ian]

What it's true!

I have a VIP tricycle...

http://www.toyandtrain.com/bigwheel.jpg

[koukimonster139]

damn nice stagger on that tricycle..

if you bought wheels before building your car, you're an idiot. wait do you even have a 240? you ask if they fit s13 or s14...

make your wheels fit right at all costs.

[Koopa Troopa]

how about toning down the haterade a little. its not like your car is mad original either.


No but my car also doesn't have 70 pounds of rotating mass attached to its hubs either...

[Dousan_PG]

No but my car also doesn't have 70 pounds of rotating mass attached to its hubs either...

equip are forged
and probably lighter then your wheels
equips are SUPER light actually
my friend had some 18x10.5
tes are lighter but equips are damn easy ot lift and move around...unlike anchor CR Kais :(

[JVD]

No but my car also doesn't have 70 pounds of rotating mass attached to its hubs either...
You're making fun of the wheels? Hahaha! You live in JP and that's your car? Pathetic.

[chmercer]

haha, my 12j 18 with 275 tire weighs less than stock 350z 17x8 with 225. fuck your cast wheels and your ganguro okinawa highschool kid car

[Koopa Troopa]

equip are forged
and probably lighter then your wheels
equips are SUPER light actually
my friend had some 18x10.5
tes are lighter but equips are damn easy ot lift and move around...unlike anchor CR Kais :(
Yeah, I had a set of 18x10 -16 and 18x11 -16 Work Equips, they were pretty light but would serve no purpose but bling bling on my 180. Might as well get some spinners with diamonds in them.


You're making fun of the wheels? Hahaha! You live in JP and that's your car? Pathetic.

Lets break this down

My car:

Greddy Surge tank
850 injectors
S15 turbo
Tomei built head with monster port, solid lifters, double valve springs, shimmed
HKS 264 cams
SDS EM4
MSD 6
GTR R33 Brembos with Apexi 2 peice Super GT rotors
Kaaz 1.5 way diff
trust knock off oil cooler kit
3 row aluminum radiator
PTCS D200 Dashlogger system
OS Giken twin plate clutch w/ flywheel
7 point cage
Cusco Zero2 suspension



etc.

How about your car or did you put all your money into some peice of shit, overpriced wheels that belong on a Toyota Crown?

[pileofherpes]

zing!

well played

[jrocslider]

Yeah, I had a set of 18x10 -16 and 18x11 -16 Work Equips, they were pretty light but would serve no purpose but bling bling on my 180. Might as well get some spinners with diamonds in them.




Lets break this down

My car:

Greddy Surge tank
850 injectors
S15 turbo
Tomei built head with monster port, solid lifters, double valve springs, shimmed
HKS 264 cams
SDS EM4
MSD 6
GTR R33 Brembos with Apexi 2 peice Super GT rotors
Kaaz 1.5 way diff
trust knock off oil cooler kit
3 row aluminum radiator
PTCS D200 Dashlogger system
OS Giken twin plate clutch w/ flywheel
7 point cage
Cusco Zero2 suspension



etc.

How about your car or did you put all your money into some peice of shit, overpriced wheels that belong on a Toyota Crown?


:Owned: :bow:

[Ian]

Half of the stuff he named is way basic...I don't see how mercer got owned.

Bragging about the knock off oil cooler? what the?

850's for an S15 turbo is kinda overkill innit?

[koukimonster139]

Yeah, I had a set of 18x10 -16 and 18x11 -16 Work Equips, they were pretty light but would serve no purpose but bling bling on my 180. Might as well get some spinners with diamonds in them.




Lets break this down

My car:

Greddy Surge tank
850 injectors
S15 turbo
Tomei built head with monster port, solid lifters, double valve springs, shimmed
HKS 264 cams
SDS EM4
MSD 6
GTR R33 Brembos with Apexi 2 peice Super GT rotors
Kaaz 1.5 way diff
trust knock off oil cooler kit
3 row aluminum radiator
PTCS D200 Dashlogger system
OS Giken twin plate clutch w/ flywheel
7 point cage
Cusco Zero2 suspension



etc.

How about your car or did you put all your money into some peice of shit, overpriced wheels that belong on a Toyota Crown?

chill out DK, you forgot some stuff...

garbage spec. wheels
ford f150 ride height
205/95/14 tires
+15 deg. positive camber
crusty paint from 89 or w/e

dont fret, im sure in 94 ur car was hot shit.

[pileofherpes]

I think his point is his car is actually fast.

[240look'n]

what size of tires are you planning on using?
in any case its more then you need

[McRussellPants]

My car:

Greddy Surge tank
850 injectors
S15 turbo
Tomei built head with monster port, solid lifters, double valve springs, shimmed
HKS 264 cams
SDS EM4
MSD 6
GTR R33 Brembos with Apexi 2 peice Super GT rotors
Kaaz 1.5 way diff
trust knock off oil cooler kit
3 row aluminum radiator
PTCS D200 Dashlogger system
OS Giken twin plate clutch w/ flywheel
7 point cage
Cusco Zero2 suspension
How about your car or did you put all your money into some peice of shit, overpriced wheels that belong on a Toyota Crown?


Wow, all that shit and you make what? 300whp? at best? hahaha nice try clown, you and the rest of zilvia makes that much.

How bout you throw that overpriced Tomei head on something than needs it?

LOLOLOL SDS? are you fucking kidding me? GROSSSSS that has what? an 8x8 injector map? ultimate dumpster tune like the rest of your car.

I also loled at the fact that everything on that list you can get used in japan for 50 cents.

[Ian]

Hey!

He's got a nice clutch ok!


haha

[McRussellPants]

No doubt it was nice when the first owner had it.

after 3 owners and two years upside down a junkyard 180SX that had caught fire "Usable" would be giving it the benifet of the doubt.

[blackflag_Rms13]

How about your car or did you put all your money into some peice of shit, overpriced wheels that belong on a Toyota Crown?
Actually his car is a hell of a lot better than your shit :goyou:

[yokotas13]

equip are forged
and probably lighter then your wheels
equips are SUPER light actually
my friend had some 18x10.5
tes are lighter but equips are damn easy ot lift and move around...unlike anchor CR Kais :(
they are like 30lbs a piece for the ones Mac has.

[pileofherpes]

Actually his car is a hell of a lot better than your shit :goyou:
*wheels

Since when are wheels the determining factor in "coolness"?

I thought we drove a sports car? Should performance be the ultimate factor?

Just a thought..

[Ian]

Yeah my friend had some small equips and i thought they were kinda heavy personally


like 17x9's and they felt pretty damn heavy...maybe 17 lbs?

[Ian]

no...we drive sportY cars that were geared towards females


Go get a Porsche 911 and then you can worry about driving a sports car

[Koopa Troopa]

Half of the stuff he named is way basic...I don't see how mercer got owned.

Bragging about the knock off oil cooler? what the?

850's for an S15 turbo is kinda overkill innit?

I originally had a td06 25G but I'm trying to limit my power to suit my driving.

chill out DK, you forgot some stuff...

garbage spec. wheels
ford f150 ride height
205/95/14 tires
+15 deg. positive camber
crusty paint from 89 or w/e

dont fret, im sure in 94 ur car was hot shit.

They're 245/45/17 in the rear and 235/45/17 in the front..
My ride height is fine, I like being able to drive over speed bumps and I like a little rebound in my shocks.
Camber is maxed negative
Cars original color was black and I could care less what it looks like. You seem to care more about what a car looks like than how it handles. You coming out of the ricer closet?

Someone throw up a picture and list of shit on that fags car, then we can decide.

http://i21.photobucket.com/albums/b267/koopatroopa187/t3h%20k00pz%20m0bi13/ohnoes000000.jpg

Driven, not hard parked like the rest of you fags.

[shane_lxi]

You guys are being hella stupid. Koopa's car is prolly a project like everyone elses, and he does have ass loads of nice ish under his hood (like, for instance, the oh so needed sr20 headwork!). Not saying anyone is in the right in this argument :P. It's not really anyone's business why he bought them, nor is it anyones place to make fun of people running wide deep offset wheels, everyone has their own style :P. He asked a question about clearence, just help him understand the fitment and run the thread out :P.

To get back on topic...
We all know the viceroy guys know hella shit about suspension and wheel fitment, so listen to them about the wheels clearing, and measures needed for clearence. THEY KNOW THEIR SHIT!

[pileofherpes]

no...we drive sportY cars that were geared towards females


Go get a Porsche 911 and then you can worry about driving a sports car
go drive a minivan

i drive a sports car

[DLo Eric]

Yes, because Cusco coils and a 1.5 way is best in handling?

Man, I've got more suspension mods in my front then you've ever had your whole life and I dont even know you.

[yokotas13]

Koopa its not worth it. Dont fight. Take it to the track, get some vid, adn enjoy your car.

[SoSideways]

I know for a fact that Dousan has crashed a few times and so has Dorifto Slut, but they always manage to fix their car and make it look better each time after each major accidents. They don't leave their car looking like Koopa's.

cmercer's car is hot no doubt, but I have not seen any action shots. Just stating the facts. I am also not on Ziptied enough so I might have missed some of that.

I haven't seen any McRussellPants action shots either.

Shit... I don't have any action shots of my car either.

Anyway...

What looks good, looks good. What looks like crap, looks like crap. 4x4 looks like crap. Slammed looks good.

I have no idea wtf I'm talking about.

Need more Guava Rockstar drinks.

And Cinnabon coffee stuffs. That stuff's the bomb digity. FL fail though, cause I haven't seen that stuff down here.

[intel]

ps...you cant say its coming from a hater... the dude has a pair of almost identical wheels to what your looking for and hes shunning them? thats like calling a pimp gay cuz he wont bang some hoes...

18x10 -16 fronts
18x11 -16 rears
5x114.3
$2K USD shipped
I accept PayPal

those are his stats....

this is his pic...

so yea..im gonna consider that owned..

http://i21.photobucket.com/albums/b267/koopatroopa187/Work%20Equip/equip004.jpg


link:http://www.trialbyfire.org/forum/viewtopic.php?t=15

[SoSideways]

I'll take that wallet please lol

[intel]

Half of the stuff he named is way basic...I don't see how mercer got owned.

Bragging about the knock off oil cooler? what the?

850's for an S15 turbo is kinda overkill innit?

rolf..ps who the fuck needs a name brand oil cooler? ...jdm tyte ....

[Ian]

Uh...someone who wants a good heat exchanger?

There is something called quality that comes with the prestige and price behind a name brand...


I would definitely rock a Setrab oil cooler way before I'd rock an ebay oil cooler

[intel]

and its an oil cooler.. if we were talking turbos, or suspension, id go quality... wtf is next? name brand air fresheners?

[Dousan_PG]

yeah its only your oil temps
that isnt important at all!

[Koopa Troopa]

I know for a fact that Dousan has crashed a few times and so has Dorifto Slut, but they always manage to fix their car and make it look better each time after each major accidents. They don't leave their car looking like Koopa's.



Who said I left it like that? It's currently on stands with the front end torn apart. I find this the perfect time to put a Silvia front on it and send my Cusco's back (I blew one during the impact) to get revalved for an 18/16 set up as well as change the paint.

To the homo who thinks you have to have a 2 way.. You do realise that a 2 way will cause understeer right? The course I drive is too narrow for a 2 way. I don't need my rear end locked when I'm off the gas. That'd be dangerous.

Use your brain, not what you read on drifting.com


You kinda can't mess up an oil cooler.. Kinda like a strut tower bar. The design is the same and I guarantee you my oil cooler came from the same factory the trust one came from..

[Ian]

Thanks Dousan...I really couldn't quite figure out what to say without coming out with something like..."and you're a fucking idiot"


good work


EDIT (for Koopa's new post)

oh my god.

[intel]

LOL!!!!!!!!!...chris ..the pic that got me banned.. rolf...

http://i21.photobucket.com/albums/b267/koopatroopa187/Work%20Equip/IMG_3334.jpg

[McRussellPants]

besides the fact that Greddy Oilcoolers are already trash.

How retarded do you have to be to not want quality parts related to the only thing thats keeping your motor from locking up/throwing a rod/other cool shenanigans?

[intel]

yeah its only your oil temps
that isnt important at all!


rolf and your saying a knock off wont do the job? do i even have to go further and validate a rebuttle? think about it....lol youre right..talk about some morons....

[intel]

besides the fact that Greddy Oilcoolers are already trash.

How retarded do you have to be to not want quality parts related to the only thing thats keeping your motor from locking up/throwing a rod/other cool shenanigans?

do YOU know anyone who has had problems with a knock off oil cooler? im surely interested in who you know that has had an engine seize do to the logo not being plastered onto the product?

[McRussellPants]

To the homo who thinks you have to have a 2 way.. You do realise that a 2 way will cause understeer right? The course I drive is too narrow for a 2 way. I don't need my rear end locked when I'm off the gas. That'd be dangerous.


lol at two way mystery science.

didn't you say something about not listening to drifting.com?

[Koopa Troopa]

besides the fact that Greddy Oilcoolers are already trash.

How retarded do you have to be to not want quality parts related to the only thing thats keeping your motor from locking up/throwing a rod/other cool shenanigans?


Why does it suck? Cause it came from a company that sells shit off Yahoo! Japan Auction and not JSpeed or Option Magazine? Get your head out of JDM tyteness and move on to logic.

[McRussellPants]

The Greddys/Chinese ones A/N fittings are brittle and crack.

Denso Cores are the worst thing since sliced bread.


Im not gonna roll the dice on my motor to save 100$, much for the same reason it would never have an SDS or AEM management system on it.

[McRussellPants]

Why does it suck? Cause it came from a company that sells shit off Yahoo! Japan Auction and not JSpeed or Option Magazine? Get your head out of JDM tyteness and move on to logic.

Setrab, ultimate in swedish hotness.

SDM faggot, JDM eats shit all day long.

[Dousan_PG]

^^ my reply haha

intel, do u always come online to back your boyfriends posts up?


you two must be boyfriend and boyfriend.
how cute.

[intel]

^^ my reply haha

intel, do u always come online to back your boyfriends posts up?


you two must be boyfriend and boyfriend.
how cute.

...actually yes aaron and we spice our long distance relationship with by role playing as the " pink godzira"...

[Dousan_PG]

thats great to hear, whatever turns you on.
sounds like you two have a great relationship
hopefully you can meet up and get some good buttsex. im sure the distance is real rough for you two.

[intel]

rolf...your a fag..he has the wheels you want...says they suck...and.mmm your a fag........ im out . you can move your ethuggin back to the aol chat rooms kid.

[Dousan_PG]

rolf...your a fag..he has the wheels you want...says they suck...and.mmm your a fag........ im out . you can move your ethuggin back to the aol chat rooms kid.


i have te37s
i have no desire for Equips in such shit ridiculous sizes

suck it
oh wait...u might actually want to
n/m

go play patty cake with your boyfriend.
see u next time defender of love.

[McRussellPants]

wait... so you're the clown with the knockoff PG mobile?

hahaha

I got a good laugh out of the Email you sent Viceroy trying to scam a sticker.

soo...

Thanks for that.

[yokotas13]

wow, this thread got big quick

[CrazyIvan]

here lemme help

http://i2.photobucket.com/albums/y50/ivanthieme/haterade-logo.jpg

[koukimonster139]

I originally had a td06 25G but I'm trying to limit my power to suit my driving.



They're 245/45/17 in the rear and 235/45/17 in the front..
My ride height is fine, I like being able to drive over speed bumps and I like a little rebound in my shocks.
Camber is maxed negative
Cars original color was black and I could care less what it looks like. You seem to care more about what a car looks like than how it handles. You coming out of the ricer closet?

Someone throw up a picture and list of shit on that fags car, then we can decide.

http://i21.photobucket.com/albums/b267/koopatroopa187/t3h%20k00pz%20m0bi13/ohnoes000000.jpg

Driven, not hard parked like the rest of you fags.


driven? what, into a fucking wall?


looks like you need to learn to drive before you build your engine... wait that was probably all done when you bought it/found it right? with the exception of the knock off oil cooler which you slapped on to call it yours

Edit: guess mashing your fender in is another way to obtain flushness tho....

[Ian]

Sweet rims by the way...

ConVEX face hotness


rofl

[chmercer]

lol this thread is baller

also lol at the name brand oil cooler thing

setrab oil coolers cost like 50 bucks

if you cant afford that, youre a broke bitch, have fun with your like stock honda passport oil cooler or whatever baller shit you run

[Ian]

I'm pretty sure it's a radiator form a Geo Metro

[JVD]

Someone throw up a picture and list of shit on that fags car, then we can decide.
You live in Japan. I could buy your car for what?... $3000 US?

http://i21.photobucket.com/albums/b267/koopatroopa187/t3h%20k00pz%20m0bi13/ohnoes000000.jpg

Driven, not hard parked like the rest of you fags.
Wasn't aware eating a wall=teh coolness.

[Ian]

Yeah...


There's a difference between driving your car and crashing your car broham


I think it's like...

Driving>Hardparking>Crashing

[Ricks15]

http://www.superstar-wheel.com/new/images/030430_2.jpg

[chmercer]

ahhhhhh bugels are the shit

[Koopa Troopa]

You guys keep talking shit but nobody's posted pics of their cars. You're all ricers of a new breed.

Crashing is a side effect of driving. Everyone does it sooner or later but recovering from it is what seperates the men from the boys. I fucked my car up and I am man enough to admit it, rebuild as quickly as possible and go back out. That says alot more than 90% of the fags posting in this thread.

[Dousan_PG]

ok sorry
http://i29.photobucket.com/albums/c252/dousan/DSC03685.jpg

http://i29.photobucket.com/albums/c252/dousan/DSC03684.jpg


350rwhp at 1.5 bar. i run only 1.2 bar at the track though
full rebuilt engine with 9:1 compression and all the fixings including cams, pistons, oil pan etc etc etc etc etc etc..
new clutch shortly right now running RPS but ill be getting an ORC or OS shortly
custom oil cooler with good lines and fittings and setrab cooler setup.

theres 4 of 8 te37s on the car right now, 17x9 0, and 2 of the 18s, i also have 17x9.5+12 and i have total of 4 18x10.5+15
and 6 other wheels on their way from japan shortly as well. ill porbalby get more TEs mid next year. another set of 18s i think. all in white from RAYS japan directly. no mackin.


and i DID NOT buy it like this
i bought a shell
did the rebuild and put it all together
the rebuild by my friends shop GARAGE WORKS in palmdale, i am not skilled to be putting motosr back together
but i did everything else.

ran great at the track too, no problems. 100% tip top. no events im doing in dec, going to paint instead. back in jan. usually do 2-4 events a month depending on tmie, work and budget.

paint next month
this month just picking color and stuff.
aero kit is all ORIGIN agressive.


anything else u wnat to nit pick?


ive crashed before too yes, nothing to be too proud of but hey shit happens.
started w/ a shitty s13 fastack, fixed it aeroed and painted it up that was bout 3 years ago.
crashed into a guard rail 1.5 years later
got a s14 kouki
sold that
went back to fast back now im at this point.

[DoriftoSlut]

Here's my old car with the Equips Aaron is talking about:

http://img.photobucket.com/albums/v238/Pink_GodziRa/041aefe4.jpg

http://img.photobucket.com/albums/v238/Pink_GodziRa/IMG_6224copy.jpg





Crashing is cool!? Get real.


Anyways, like Aaron said, those Equips were not that heavy. The 18x10.5s were lighter than 18x9.5 CR Kais. Deal with that.

[Koopa Troopa]

When I shipped my 18x11's it was 36 pounds per box. When I shipped my 18x10's it was 32 pouinds perbox.. Cardboard and newspaper don't weigh all that much...

[DoriftoSlut]

I dunno what to say. I shipped my wheels to a member on this board when i sold that car.

Was about 24lbs per box for the 18x10.5s.




Maybe you got some full on year 640 B.C. cast ones? I have never seen a 32 pound wheel. That's insane.

[DoriftoSlut]

Driven, not hard parked like the rest of you fags.


http://img.photobucket.com/albums/v238/Pink_GodziRa/Industry_Day_3_05212006_078.jpg

http://img.photobucket.com/albums/v238/Pink_GodziRa/Industry_Day_3_05212006_062.jpg

http://img.photobucket.com/albums/v238/Pink_GodziRa/TonyLinds.jpg

http://img.photobucket.com/albums/v238/Pink_GodziRa/widelow3.jpg

http://img.photobucket.com/albums/v238/Pink_GodziRa/DSC02195.jpg

http://img.photobucket.com/albums/v238/Pink_GodziRa/widelow1.jpg








Chomp chomp chomp eat me.

[Koopa Troopa]

Even then, 24 x 4 = 96 + X which would be the massive tires needed on those wheels. Tires that hurt your handling more. Your average 240SX does not have the power nor the weight to warrant a 275 tire. That tire will never heat up to it's full potential to do you any good. Not to mention you're not even using the majority of that tire because you have to run such god awful camber to make the wheel fit.

I'll keep on rocking 17x9 +20 and run a 255 or a 245.


Must be nice to have an open track.. We don't have any in Okinawa

[DoriftoSlut]

WHAT KIND OF DRIFTER ARE YOU!!!!????

I was running 245 or 255s on those 10.5 Equips. And I was making about 330-350 rwhp. Get real. With a good tyre like a Federal that thing hooked up and went like a Rocket ship.


Are we turning this discussion into overall circuit tuning for grip/time attack cars now? Most likely anyone going with a 3 piece wheel designed for 80's RWD cars aren't gonna be picking up a big performance benefit. Especially when newer wheels are 1 piece forged and much lighter, but able to be offered in very sufficient sizes (the reason for multipiece wheels back in the day was to get precise width and offset easily, but the added weight of the wheel's design was ultimately its downfall in racing).

[Dousan_PG]

these equips aint made for roadracing in these sizes
obviously vip or drift car
quit trying to change the subject
your are looking mor like a jackass
u know what type of cars these are going on and hve been on

i always run at LEAST a 245
im going to start using a 255 sometimes too
mo grip is better
i ony have -1.5 to -2 degress of camber out back

[Koopa Troopa]

WHAT KIND OF DRIFTER ARE YOU!!!!????

I was running 245 or 255s on those 10.5 Equips. And I was making about 330-350 rwhp. Get real. With a good tyre like a Federal that thing hooked up and went like a Rocket ship.



Who said I was a drifter? I drive gymkhana and mountain roads.

[yokotas13]

I dunno what to say. I shipped my wheels to a member on this board when i sold that car.

Was about 24lbs per box for the 18x10.5s.




Maybe you got some full on year 640 B.C. cast ones? I have never seen a 32 pound wheel. That's insane.
the 8 that i sent 10 and 11 wide 18s were 28 fronts and 33 rear lbs no packign material 3 piece equips.

[DoriftoSlut]

I don't know what to tell you guys then.

On those, did they have a little bit of material hollowed out on the back of each spoke and between the lugnuts on the backside of the face?

My Equips were like that. THat's how the mould was for the center portion.

[yokotas13]

yep so are these
http://static.flickr.com/141/321181561_bf476a3ded.jpg
http://static.flickr.com/131/321181479_9f44c4fc71.jpg

[DoriftoSlut]

Yup mine were like that and had a stamp that said "Forged" on them.

[yokotas13]

i kick myself in the ass for sellign them lololz

[kuramaya]

my head hurts..Koopa Chill Brother..

[Raven_R1]

WOW...i cant believe all the hostility and bickering over 10-15 yr old nissans

[kuramaya]

WOW...i cant believe all the hostility and bickering over 10-15 yr old nissans

Raven we already kicked you outta zeroyon.com stay the fuck outta here...

So everyone knows, this is the rich kid that was banned from http://www.zeroyon.com with multiple screenames that knocked our cars for being so old..

[yokotas13]

jesus hes here too?

Where the fuck is my safc 2 bitch

[Phlip]

WOW...i cant believe all the hostility and bickering over 10-15 yr old nissans
I hope you have not joined our forum just to start shit. Calm it down, lest your stay here will be a short one.

[yokotas13]

he did, same with zeroyon

[Phlip]

its acura legend u angry jap.... well in america neway
lol jk ;)
You just got banned a month for using a racial slur, meditate on that a while, please.

[Raven_R1]

Raven we already kicked you outta zeroyon.com stay the fuck outta here...

So everyone knows, this is the rich kid that was banned from http://www.zeroyon.com with multiple screenames that knocked our cars for being so old..


rich? thats news to me...drivng a M3 dosnt make you rich :loco:

naa im not here to start shit...but seriously bickering over this stuff is extremely immature. Besides it dosnt prove anything...it' still just the internet fellas

koopa happens to be a cool ass dude who i have let drive my Altezza before in driving events...and I'm very happy for him that he was finally able to get his own car. he deserved it.

[Raven_R1]

jesus hes here too?

Where the fuck is my safc 2 bitch
whats the with name calling? LOL
to be perfectly honest with you, since my raven account was banned i dont have acccess to my PM's anymore so i dont even know your address. since it has been soo long you can just have the SAFC. its on me.

[Phlip]

Actually, I am banning Koopa.
He seems to want that to take place, and I am just enough of an asshole to make it happen:
http://www.zeroyon.com/forums/index.php?showtopic=10883

[Raven_R1]

Actually, I am banning Koopa.
He seems to want that to take place, and I am just enough of an asshole to make it happen:
http://www.zeroyon.com/forums/index.php?showtopic=10883
i think he was being sarcastic when he said he wants to be banned....koopa is a well like member on zeroyon...i have never heard anyone have a problem with him
can i ask you what he did that is ban worthy tho?

[yokotas13]

nah, he wanted to be banned, im with him on AIM now lol

[Raven_R1]

nah, he wanted to be banned, im with him on AIM now lol
ahh ok. well i guess he's getting his wish LOL.
koopa your a funny dude man

[Phlip]

Actually, I am completely missing the sarcasm there. If there was an attempt at it, someone failed, instead becoming more and more hostile. He said that he would try and get banned, I granted his wish, he can take a month off and come back if he likes when it is over.

[Raven_R1]

Actually, I am completely missing the sarcasm there. If there was an attempt at it, someone failed, instead becoming more and more hostile. He said that he would try and get banned, I granted his wish, he can take a month off and come back if he likes when it is over.

well i give you props as a mod, casue those fags -cough cough FDokinawa, and Broke- cough cough mods on zeroyon advocate to ban people becasue they have a different taste in cars than the majority.

[yokotas13]

it was your actions man, not your cars.....your attitude

[Felon_Monk]

personally i like the wheels.. thats all i gotta say.. :rofl:

[Raven_R1]

it was your actions man, not your cars.....your attitude


i dont know man....the reason i was even aware of zeroyon was because someone had taken pics of my Altezza at the shopette and people were talking shit about it....granted i wasnt always the most "politically correct perosn on the forum, ie i expressed unattraction to dislike asian women, my relative disdain for okinawa, and i bragged a little bit about my M3, but no more than anyone else does who has something they are proud of.
Yes, i did make dergagotry comments about some of the cars on zeroyon, commenting about their age, how they looked like shit (they really do tho) and how i want my cars to have a nice balance of looks, comfort and performance, hence the purchase of my E46 M3 (which no one on that forum thinks is a sports car, but a Nissan Silvia is....go figure) and the recent purchase of my Audi A6 sedan.

[Raven_R1]

personally i like the wheels.. thats all i gotta say.. :rofl:
FELON!!! whats up foo?! i agree with you...i like the wheels for what they are...will they win any points at a car show...ummm maybe the Okinawa Flight line show HAHA, jk, but they serve a purpose and look decent doing it. thats all that matters on this level

[yokotas13]

THATS why you were banned^ consistent comments like that

[Raven_R1]

THATS why you were banned^ consistent comments like that
comments like what? lets not beat around the bush...those rims are no show stoppers!! but they serve a purpose and look decent while doing it...whats the problem? :tweak:

[yokotas13]

you coul dhave just said, nice rims.

[kuramaya]

Felon Monk...you bitch ass..ha ha it took a thread like this to bring my crew here huh? (sorry raven came as well) yeah Koopa is a nice kid, I would like to think of myself as a mentor or a big brother to him, I am not sure why he went on that tangent....

Raven Dont even start man, I tried to be cool with you. Let's see on the 3rd banning you posted a picture of tons of 100 dollar bills just to flaunt it, you talk about all the money you have and cars, and trust funds, and houses, and and and..you put down the 10-15 year old cars we have, have no idea how much work we put into them, have never turned a wrench on a car in your life...you did not belong, we are guys that cant afford M3's and off the shelf performance rides, we would rather buy a 15 year old car with the money we have, then scrounge up money to modify it and make it faster, handle better, and whip up on M3's... PHILP he will pull levers and push buttons until he drives people crazy. Fuck Him! I will take a ban for the team if he is banned. You Don't wnat this conceited child on this forum..

[yokotas13]

everything he says is true....but i think hes just kinda like that. Like im add

[Felon_Monk]

Felon Monk...you bitch ass..ha ha it took a thread like this to bring my crew here huh? (sorry raven came as well) yeah Koopa is a nice kid, I would like to think of myself as a mentor or a big brother to him, I am not sure why he went on that tangent....


yea i finally logged in.. already had an account.. But yea, koopa is funny that way.. *shrug* .. glad to be here.

[Raven_R1]

Felon Monk...you bitch ass..ha ha it took a thread like this to bring my crew here huh? (sorry raven came as well) yeah Koopa is a nice kid, I would like to think of myself as a mentor or a big brother to him, I am not sure why he went on that tangent....

Raven Dont even start man, I tried to be cool with you. Let's see on the 3rd banning you posted a picture of tons of 100 dollar bills just to flaunt it, you talk about all the money you have and cars, and trust funds, and houses, and and and..you put down the 10-15 year old cars we have, have no idea how much work we put into them, have never turned a wrench on a car in your life...you did not belong, we are guys that cant afford M3's and off the shelf performance rides, we would rather buy a 15 year old car with the money we have, then scrounge up money to modify it and make it faster, handle better, and whip up on M3's... PHILP he will pull levers and push buttons until he drives people crazy. Fuck Him! I will take a ban for the team if he is banned. You Don't wnat this conceited child on this forum..

well kuramaya i never had a problem or beef with you...your still cool in my book....i took a pic of the 75, $100 bills because i wanted proof that i had it since i keep that shit in my dorm room under my bed. I dont have any houses other than my parents, which is technically not mine...so im not sure where that came from. The only time i mentioned the turst fund was when you guys questioned how i could afford the Altezza, and the Supra and the M3 when i was an E2. Thats the only time i mentioned it, or anything to do with money...you guys asked, i told.

I have wrenched on my own car plenty of times...my EK civic back in the day i knew inside and out...you are right about not turning a wrench on the Altezza...i left that for the mechanics who make a living and put food on their familys table by wrenching on cars.
My M3 is tuned and modified, and im proud of it..esp since that huge set back when it got jacked up outside an atlantic city nightclub. I have NOTHING against people who tune older cars. Shit i will be tuning an older car (my S2000) when i get back to the states. I dont think the issue with me was weather or not i tuned my own car...the issue was i liked different kinds of cars than the majorty to tune...big difference man.
and btw you could afford an M3 easily. assuming you wanted one...add up how much you have spent modding your current car...you would be surprised man. and not to poke or anything, but your car with all the mods you put into it still cant take my M3...even when the M3 was stock.

[Phlip]

Hey, how about we get back on topic, people.

[Raven_R1]

Hey, how about we get back on topic, people.
sounds good to me!
why r u up soo early mod? its like 840am on the east coast

[yokotas13]

becuase people work. and philip is a 24 hr pimp


Put the wheels on your car, if they fit they fit, if not. make them fit

[Raven_R1]

becuase people work. and philip is a 24 hr pimp


Put the wheels on your car, if they fit they fit, if not. make them fit

24hr pimp lol

the next time i go to work after Feb 8th 2007 (my last day in the military) is when i graduate college in the summer of 2011. Im taking 4 years off :)

[driftenthusiast]

18x11.5 -21..18x10.5-6 offset will it fit s14or s13 ?? and what wide body or flares i can get away with these wheels?? thanks ahead.:)
Are you getting an S13 or 14? they will probalby fit the front of and S13 with 30mm( i think thats the size bmagic sells) wide fenders but as far as tire size it would have to be like a 245/35/18. I am putting 18x10 -16 offset and have alot of room at the coilover, but tried fitting a 255/40( i dont know what i was thinking) and its WAY to big.

When I shipped my 18x11's it was 36 pounds per box. When I shipped my 18x10's it was 32 pouinds perbox.. Cardboard and newspaper don't weigh all that much...
The exact weight written on the boxes shipped by bjork are 32,32,34,35, i am looking at them right now.

[intel]

lol koopa gets banned from everywhere... im sure hes used to it
and as for the arguement.. im all for the wheels if you can afford it and you make the power to break them lose....

- i just personally hate doing shit for the " Jdm baller" effect... im the type of guy who actually spray dyes carpet and door panels rather than upgrading them.

[intel]

ps... fuck wheels........... get some CF doors if you wanna bling lol

[SoSideways]

ps... fuck wheels........... get some CF doors if you wanna bling lol

What about brakes? :bigok:

[Ian]

Yeah...please get CF doors nad don't get door bars...then get T-boned

[intel]

Yeah...please get CF doors nad don't get door bars...then get T-boned


lol that would blow!! id be far more pissed about my 2,000 doors then my
mutilated corpse

[McRussellPants]

lol, japan 300$ car crew rollin balls deep in here now.

CF doors? what are you, gay?

lolololol at captain racecar talking about wheel weight like it matters. Look at your car buddy, even if you had half the steet racer skillz you purport yourself to have you wouldn't feel it since that shit heap of a car is so tweaked (not to mention those 02s are prolly made in the same year as those wheels) having 3 extra lbs per corner would matter less than a waxing the windsheild for topspeed.

furthermore, lol gymkhana. isn't that like autocross except at 20mph? I could bring a fucking golf cart to any gymkhana course I've seen and be on the pace, and Im saying that because Im being cocky, if i were cocky id say I could beat you on a Tonka Tuff plastic 4wheeler and probably still be right.

[Revolver Ocelot]

^ROFL!!!!!

"You have given out too much Reputation in the last 24 hours, try again later."

Dammit!!

[PKaBooo69]

lol, japan 300$ car crew rollin balls deep in here now.




:rofl: I wish stuff was that cheap here, so my broke ass could afford to do more


Im taking 4 years off

how bout takin a few years off from posting on any forum

[harlockssx]

lol, japan 300$ car crew rollin balls deep in here now.

CF doors? what are you, gay?

lolololol at captain racecar talking about wheel weight like it matters. Look at your car buddy, even if you had half the steet racer skillz you purport yourself to have you wouldn't feel it since that shit heap of a car is so tweaked (not to mention those 02s are prolly made in the same year as those wheels) having 3 extra lbs per corner would matter less than a waxing the windsheild for topspeed.

furthermore, lol gymkhana. isn't that like autocross except at 20mph? I could bring a fucking golf cart to any gymkhana course I've seen and be on the pace, and Im saying that because Im being cocky, if i were cocky id say I could beat you on a Tonka Tuff plastic 4wheeler and probably still be right.

Man, you need to chill a bit. We're all here to learn/help/buy/sell...you don't have to be a jerk to get your points across. BTW, if you've never done gymkhana, then you're not educated enough about it to say anything at all...it is extremely demanding in different ways than just going straight or around a circle track...for instance, you have to memorize the course, there aren't lines or cones for you to steer between for the entire course. It's a lot more demanding on a driver due to having to think about what you're doing even more than autocross or roadracing. It's real easy to be an E-Thug, but it's not cool...

[byhi]

can i just say that this thread is actually fucking sweet. Ive never seen so much carnage, for the record, i like equips, they are pretty good wheels, but they arent anything special, i hate when people think their wheels are the best-o-the-best... y'all know its about Fabulous nigraz! :keke:

[Ian]

Uhh...

Actually it's all about Garson Deep Racing

[McRussellPants]

all of you eat shit.


Weds LXZ or braintumour.

[byhi]

Uhh...

Actually it's all about Garson Deep Racing

yeah if you thought of that yourself instead of sackriding other forum members personal taste...

Garson deep racing are a pretty cool wheel, i'll give it up i guess

[McRussellPants]

only thing more lol than someone saying circle track is easier than cones at 20mph is watching a Nascar driver do better his second time in a drift car than half the formula D feild.

[byhi]

all of you eat shit.


Weds LXZ or braintumour.

yeah LXZ for teh cool, i love that pic of the blue estima (dotn quote me on that, i dotn pay attention to vip vans) with the super wide LXZ's, very cool

[byhi]

only thing more lol than someone saying circle track is easier than cones at 20mph is watching a Nascar driver do better his second time in a drift car than half the formula D feild.

on a wierd note, i have always said the same, i never was a fan of nascar, but i always have respected all that goes in to it from weight and power legistation, therefore i respect all that it entails. even though i dont watch it

[harlockssx]

only thing more lol than someone saying circle track is easier than cones at 20mph is watching a Nascar driver do better his second time in a drift car than half the formula D feild.

Apples & oranges & taken out of context. Do you have anything positive to contribute, or are you only here to feed your own ego? Grow up, please.

[kuramaya]

Mc russel stover, the last gymkana I was in, I was hitting 100 klms per hour, so I am not sure what the fuck you are talking about...Gymkana here are 3rd gear courses...

[junkyard racer]

HOly shit. Whatta thread.

all over some dam wheels.

D, I love the sig :)

[Phlip]

Oh, the drama, people were banned, bannings were argued and appealed by friends of the banned and the banned themselves.
Warnings to STAY ON FUCKING TOPIC were given.

I have had enough, this shit ends now. I should have locked it this morning.