PDA

View Full Version : 17x10 +35 S13 rear fitment


mastaflash05
12-04-2006, 06:59 PM
im trying to find out how the fitment would be with 17x10 with +35 offset. running coilovers. i have searched and it seems that 17x10s are stupid rare for the s13. anyone who has these wheels or something close to it please LMK.

iMAGE976
12-04-2006, 07:01 PM
i run a 17x10 +18 in the rear of my car and it clears....with a roll and slight pull on the fender...other than camber, thats all u need to do to make it fit....+35 is kinda high in my opinion but thats just me. go +25 or lower...Good luck and i hope this helps

mastaflash05
12-04-2006, 07:10 PM
what size tire are you running? im wanting to run a 245 40 17. i also think that the +35 is too high. i do have a set of 15mm H&R spacers that i could use, making it +20.

do you think you could get me a couple pics of your fitment? [email protected] id apreciate it a shitton.

GSXRJJordan
12-05-2006, 05:01 AM
yeah in a 10" wide wheel, you'll need that spacer to clear those coils for sure. And yes, 10" wheels are 'stupid rare' on s13s :)

The 245 is a dumb idea btw - 1" of stretch per side? get a 9" wheel. <==[not a fan of huge stretches]

mastaflash05
12-05-2006, 05:04 AM
actually im not a huge fan of stretching either. i just dont want to have huge clearance issues. would something like a 265 clear? wider is better for me. im not into drift or the looks of stretched tires, so.

Wiisass
12-05-2006, 05:55 PM
A 245 is 9.65" wide and a lot of tires will run a little bigger than that especially performance tires. I don't know how that makes a 1" stretch on a 10" wheel.

-=RS13=-
12-05-2006, 06:54 PM
17x10's +35 fit. Next time i would do the +25 (at least). I am gussing your going 5Zigen (gay)

This is 2.5 degree's of camber and with 245's ST-115 Falkens, full compression on tire that is why it looks so streached. Hammered flat lips. And if you have Hicas you need to trim the ears off your outer tire rod
http://img154.imageshack.us/img154/4453/highresautoxrt2.jpg (http://imageshack.us)

But it clears Megan track coilover by about 1.5 inches

mastaflash05
12-05-2006, 07:34 PM
very nice car man. looks great. so those are the +35 then, since you say you would do +25 next time?

yeah they are the typical fn's, but i like them and they will work. cheap, and look good.

koukimonster139
12-05-2006, 07:40 PM
+2
clean
flush
dont lose ur side tho

-=RS13=-
12-05-2006, 08:27 PM
+2
clean
flush
dont lose ur side tho


LOL

Its decently clean for a Canadian car
Not really that flush, i call it even, Not mexi-flush.
The skirts have been remounted.

But i am keeping the +35's for grip (255 ish) and ordering some +25 Maybe even some +15's to strech 235's on for drifto