View Full Version : Garage clean-up super Sale!!! PICS INSIDE
CoasTek240
12-04-2006, 10:46 AM
(I have updated this as of July 1st 2008)
Well, I'm in San Diego. Living with my brother..
Never used (still in box) Garrett turbo t3/t4 looking for trade with a smaller (rebuilt, or low mileage turbo and Cash, t3's t25/28.. etc)
specs on turbo are as goes:
T3/T4 T04E Turbocharger A/R .50 stage 3 Turbo
3" INLET DIAMETER 2" OUTLET WET FLOATING BEARINGS 1/8 NPT OIL INLET FITS T3 AND T3/T4 MANIFOLDS
.50 A/R COMPRESSOR .63 A/R TURBINE
.57 TRIM
5 BOLT FLANGE
SOLD
***Ebay XXL intercooler. 3" inlet and outlet
SOLD
http://myspace-111.vo.llnwd.net/00727/11/14/727604111_l.jpg
SOLD
email me @
[email protected]
or you can catch me on AIM: Coastek240
punxva
12-04-2006, 01:01 PM
yo Dave ill take tur FMIC and maybe the side skirts btw ive got your valve cover at my house im going home in a few days to install my coilovers if uw ant me to pick that stuff up from u then or whatever just hit me up on my cell
Jookmasta
12-04-2006, 02:59 PM
hey specs on the turbo? whats the back housing? five bolt or four bolt? does it have a wastegate hole? i might be up for the trade for my str8 t3.........pm me.
BoostedS4life
12-06-2006, 03:20 AM
...
message length
oni-kyan
12-06-2006, 03:30 AM
hey man can you pm me a quote for the silvia front lip piece and the side skirts
515 Jones ave unit 1
M4J 3G8
Toronto Ontario Canada
Thanks Mael
markyboi
12-06-2006, 03:38 AM
how much for:
(1) AeroMagic SuperPIMP JDM aerolip. SUPER RARE
ill find out how much shipping is.
CoasTek240
12-07-2006, 01:50 AM
pms sent
I must sell. I blew my newly installed motor and I'm completely broke right now.
locust13
12-08-2006, 04:50 PM
what is that bumper for? s13 silvia? goes over stock silvia bumper? aero bumper, or is it a full bumper replacement? interested could possible pic up too.
punxva
12-08-2006, 05:10 PM
it goes on either a stock silvia bumper, or it fits on a pignose bumper, btw dave i got a new phone so i need ur # again
bzebern
12-08-2006, 08:04 PM
im interested in the turbo
i also have a brand new turbo for sale in this section
i have a supra so the turbo i have is small
http://img.photobucket.com/albums/v405/bzebern/turbos003c.jpg
http://img.photobucket.com/albums/v405/bzebern/turbos003b.jpg
http://img.photobucket.com/albums/v405/bzebern/turbos003-1.jpg
im located in so cal
bernard
cell 818 653 7953
bzebern
12-08-2006, 08:08 PM
heres the spec on my turbo
T3/T4 T04E Turbocharger A/R .50 stage 3 Turbo
3" INLET DIAMETER 2" OUTLET WET FLOATING BEARINGS 1/8 NPT OIL INLET FITS T3 AND T3/T4 MANIFOLDS
.50 A/R COMPRESSOR .63 A/R TURBINE
.57 TRIM
TURBINE WHEEL: EXDUCER: 2.48", MAYOR : 2.89"
COMPRESSOR WHEEL: EXDUCER: 2.07", MAYOR : 2.36"
THIS TURBO CAN EASILY DO 25 psi
5 BOLT FLANGE (AND INTERNAL OR EXTERNAL WASTEGATE CAPABILITY)
HAS A HOLE FOR INTERNAL GATE APPLICATIONS IF YOU WANT TO USE A T3/T4 WITH AN INTERNAL ACTUATOR OR YOU CAN USE THIS WITH AN EXTERNAL GATE
CoasTek240
03-08-2007, 02:17 AM
PunxVA- hey man. I pmed you my cell phone number. hit me up . im in richmond all the time. ill bring it to ya. btw, i just ordered my new block and head, when are you gonna hook me up with that polished valve cover.
the specs of my turbo are the same as bzebern...
T3/T4 T04E Turbocharger A/R .50 stage 3 Turbo
3" INLET DIAMETER 2" OUTLET WET FLOATING BEARINGS 1/8 NPT OIL INLET FITS T3 AND T3/T4 MANIFOLDS
.50 A/R COMPRESSOR .63 A/R TURBINE
.57 TRIM
5 BOLT FLANGE
everything is still for sale, but add a set of 18" stern wheels. you can see them in my other thread http://www.zilvia.net/f/showthread.php?t=136336
CoasTek240
03-29-2007, 03:01 AM
updated....priced to move...make an offer. I may not refuse it.
cheapsta757
04-13-2007, 06:29 AM
you said for that turbo you would trade a t25? i have one with minimal shaft play. intrested?
yoinkAzenki
05-04-2007, 08:03 PM
sent you a pm.
CoasTek240
01-12-2008, 11:07 AM
I have updated my original post to be accurate as of, Jan 11th 2008.
I am moving to SD. gotta sell everything fast
CoasTek240
01-29-2008, 09:19 PM
all pms have been replied.
I am also looking to sell/trade my s13.
check out my car in the cars for sale thread.
DataXUnknown
01-29-2008, 10:56 PM
how much for intercooler? shipped to 92807? or local pickup if you are coming to SD real soon.
CoasTek240
01-30-2008, 01:01 AM
it may be close to a month before im out there. id like to sell everything to raise money for expenses till i get a job.
i sent you a pm.
jarober
02-08-2008, 12:50 AM
Could you please pm me with a tracking #. I have pm'ed but have gotten no reply. Thanks
jarober
02-08-2008, 10:00 PM
Got the main studs today. Thanks for the great deal.
CoasTek240
03-06-2008, 05:03 PM
Bump... updated prices and items for sale.
energy0uth
03-07-2008, 08:51 PM
pm'd........
CoasTek240
03-25-2008, 10:43 PM
buy my turbo or wheels. Ill take almost any reasonable offer. I need the money more than i need these sitting at my parents house 2000+miles away from me.
punxva
03-26-2008, 06:33 AM
bro i wished you hadent sold the other car so i could've bought the 5 lug, brakes and wheels off it.
skis240sux
03-26-2008, 06:40 AM
buy my turbo or wheels. Ill take almost any reasonable offer. I need the money more than i need these sitting at my parents house 2000+miles away from me.
pm price for the turbo and size of the inlet flange also interested in the intercooler if you can give me sizes and a price to im in nc and could pick up if needed
CoasTek240
03-28-2008, 01:01 PM
pmed all.
leaving tusday morning.
lowball all you want.
skis240sux
03-29-2008, 07:29 AM
pmed all.
leaving tusday morning.
lowball all you want.
pmed back xc
CoasTek240
04-17-2008, 06:29 PM
updated 4/17/2008
ttt
blackalicious95
04-18-2008, 12:27 AM
is it 20 shipped for the valve cover?
got any pics of it?
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.