PDA

View Full Version : no reverse lights!


insanequickness
11-28-2006, 11:19 AM
ok i know there is a sensor on the tranny...
so if its plugged in then the sensor is bad correct?
anything else cause this?

cotbu
11-28-2006, 03:10 PM
NO! your bulbs could be blown or a short in the wiring!

'90RPS13
11-28-2006, 04:27 PM
Look at all the red squares in here? Damn. Kinding wondering if I should be in here. LOL. Naw, like he said, check shorts in the wire or possible blown bulb. *a

mrmephistopheles
11-28-2006, 06:45 PM
check the freakin' fuse first.

fuse first
then bullbs
then sensor.

insanequickness
11-28-2006, 09:06 PM
well ive obviously checked the most obvious...
the bulbs are new...
wiring looks fine...

'90RPS13
11-28-2006, 09:33 PM
Smarting off to Kev is not the wisest. Should have stated it in the main post. *a

NemeGuero
11-28-2006, 09:42 PM
How do you know the bulbs are fine? Put a voltage across them and see if they light up.

Did you really check the wiring? Continuity test? Or did you just look at it and say "yeeupp.. thats some good wiring."

TipStylez
11-28-2006, 09:50 PM
It means, get clear taillights.

mrmephistopheles
11-29-2006, 12:11 AM
well ive obviously checked the most obvious...
the bulbs are new...
wiring looks fine...
so have you checked the fuse or not?
You didn't say that you have.
Drop your attitude, it's unneccesary.