Parting out SR set up and extra's

[bardabe]

Ok I am parting out my motor set. and set up. My Oil pump took a crap on me so I ate all the bearings and yeah rod knock. anyways. I am parting otu the whole set up her eis waht I got

3 Sets of OEM 370cc injectors 100$ each first buyer gets a free set of extra injector o rings unless someone gives me 15$ for the o-roigns shipped.
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/DSCF0266.jpg
2 S13 SR MAF's 40$ each
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/DSCF0262.jpg
Apexi Power Filter Kit for Z32. 60$ (apex box, filter, brakets etc.)
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/DSCF0264.jpg
S14 Kouki Maf (KA) make offer and SOHC MAF make offer
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/DSCF0263.jpg
HKS Down pipe 100$
HKS Carbon Ti Exhaust with 2.5 piping and dummy cat 150$ + shipping (local pick up prefered)
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/HKS3.jpg
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/HKS2.jpg
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/HKS1.jpg
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/HKS4.jpg
Sard FPR with fitting and Fuel Pressure gauge 120$
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/Image048.jpg
OEM Sr clutch only 4K miles on it. 80$+ shipping
OEM FLywheel 30$+ shipping
CAS 120$
Piston rings. New never used. but opened. 70$
S13 Brake Master Cylinder 20$+Shipping
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/DSCF0268.jpg
Z32 Brake booster 40$
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/DSCF0267.jpg
Automatic S13 brake booster 35$
http://i5.photobucket.com/albums/y196/FairladyZ32/BBooster.jpg
5 speed brake pedal (30$ + shipping)
OEM Z31 clutch slave cylinder 20$
OEM S13 Calipers (front) 50$
Aluminum S13 SR intercooler pipe kit. 150$+shipping (pictures of only hot pipe and FMIC, all pipign will be included. its 3" aluminum pipes)
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/DSCF0265.jpg
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/FMIC1.jpg
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/FMIC2.jpg
http://i5.photobucket.com/albums/y196/FairladyZ32/S13%20Parts/FMIC3.jpg
OEM Side mount intercooler set up. 100$
Black top T25 turbo , no/ very minima l shaft play. 150$+shipping
02 sensor only like 4,000 miles on it 30$
JDM Cluster 100$
S13 SR harness 200$
SR 5 Speed tranny 400$
OEM Silvia center garnish 50$
Z32 OEM Rear Tail lamps
Z32 Rear shocks, springs struts and Spindles, LCA, traction rods etc. ehhh 150$ + shipping.
Random/ Misc Z32 interior pieces.

The Motor has not been pulled yet to fully inspect the Internals of the motor. however compression holds fine with a wopping 145,145,135,145. E-mail me if interested in pickign up the whole motor before I dismantle it and part it out as well. Pics will be up Tomarrow all Items are OBO. paypal or cash Only. local pick up is prefered. but shipping is included unless otherwise noted. if paypaled add the 3% paypal fee. any questions or want items i did not list(this is all at the top of my head I'm sure I got more stuff just can;t think of it.) . email me at [email protected] or on aim Wanton TD

thank you for your time.

(all Items located in socal 951 [moreno valley/riverside] Area)

*added new stuff 11-28-06*

[WILDACEX187]

i'll give u 10 bux + shipping for the fuel pressure gauge and fitting. is that o2 the skinny type or the fat type?

[bardabe]

i'll give u 10 bux + shipping for the fuel pressure gauge and fitting. is that o2 the skinny type or the fat type?
the O2 is the skinny type. and the gauge is being sold with the unit. the fitting is attached ot the unit. so I Wont part it out. sorry

[WILDACEX187]

oh ok thank u. will u be parting out motor if nobody buys?

[bardabe]

oh ok thank u. will u be parting out motor if nobody buys?
Yeah the motor will be parted out once i get it out and inspec the damage. so I know what is good and what is caca. is there anithing u are intrested in?

[WILDACEX187]

maybe the tb and tps. i'll let u know though im not sure yet.

[UNITEDMASTER]

Hello I need the power stearing high pressure line are you willing to let it go ,also how much are you looking to get for the motor (long block) only & I will come pull it.LMK PEACE

[bardabe]

RIght now I have an offer of 300$ on the short block. (no pistons crank etc, and a blank head, no springs retainers etc..) so I would say make me a good offer. and the powersteering line.... well I'm RHD so I don;t think U can use it. =)

[SDS13COUPE]

Hello, I am interested in the valve springs if you part the engine. Also the skinny o2 sensor. I have paypal ready. I live in San Diego so keep me posted. Thanks

[bardabe]

new Items added. will add pics when I get home

[bardabe]

New pictures posted, updated items MIght consider selling car as well.
1990 S13, Silvia Front, New Paint, RHD, Full interior, no AC or Heater. everithing else works. shoot me some offers.

http://i5.photobucket.com/albums/y196/FairladyZ32/Picture078.jpg
http://i5.photobucket.com/albums/y196/FairladyZ32/Picture077.jpg

[komedy]

i want that intercooler kit. what brand is it and size of core? is that the same intercooler shown on the front end of that black silvia?? any damages?
let me know im very interesed, i can pick up asap!!
thanks [email protected]

[yokotas13]

if he doesnt get it ill buy it if you ship it

[bardabe]

replied to email. yeah I will ship and buyers expense. the FMIC is 3.5X12X24 and the only known damage is a little dent on each side of gthe end tanks fromt he frame. other than that its straight. 3" piping with 2.5 inlets and outlets on the FMIC. the core is a Kinetic motorsports. I bought it used for 280$ my loss is your gain. the only thing U will need to buy the reducers and some couplers.

[yokotas13]

nvrmind then
I dont have teh sources to get them at stateside prices
that shits expensive here

[CRZY_AZN]

if your willin to part with the hotpipe ill pick it up from u?

[bardabe]

if your willin to part with the hotpipe ill pick it up from u?
sorry I can sell teh FMIC appart formteh piping. but I wont part out the IC pipng sections.

[koukimonster139]

80 + shipping for fpr and gauge ?

[ViZion Zs]

ill buy the intercooler setup pronto. PM me your number or call 949 201 9567

[bardabe]

Ok it;s been decided. I'm keeping the car but the motor will be parted out. Someone is picking up the block this Friday, the head is up for grabs. Head with complete valve train, (resurfaced, hot tanked cleaned, inspected and re polished lobes. cams also re polished, valves reseated etc.) a full perfect spec head 250$
make me an offer right now the block stands at 175$ the block is also fine. I will take pics when i strip it down to the bone. full motor part out. exhaust and FMIC is up for grabs as well, the 3 sets of injectors,maf's, brake boosters, pedals. etc. [the SMIC kit is sold.]

[Sil-Abc]

is it 150+shipping for the piping and the core?

[kousuke180sx]

interested in z32 brake booster can you do 35 if i come pick it up this weekend? thanks

[bardabe]

interested in z32 brake booster can you do 35 if i come pick it up this weekend? thanks
yes, however I will be in D1 this weekend. so yeah ha ah but 35 picked up is fine. PM me for detail or hit me up on AIM

[bardabe]

is it 150+shipping for the piping and the core?
I could not edit my post anymore but I am not selling my piping anymore since I am keeping the car. however if U wanna pick up the core. make me an offer. its a kinetic Motorsports 3.5X13X24

[fromxtor]

PM me with price + shipping on the apexi elbow with filter

[punxva]

how much will you sell me just the intercooler core shipped to 23325?

[JesusFreakDrifter]

will purchase sr injectors soon as well as the t25 intake inlet, if you can thanx

[bardabe]

intercooler core I will get a shipping quote on it and post it up. injectors are still available. turbo inlet im not sure yet. i dunno if my new motor comes with manifolds sooooo I will let you guys know exacly what im selling next week but so far whats posted its whats for sale. (exept the down pipe, and Apex intake, FPR, and intecooler piping.)

[Creizai]

Apex Intake kit for Z32 Shipped to 45246 pm me please.

[bardabe]

Apex Intake kit for Z32 Shipped to 45246 pm me please.OMFG please read. ure the 5th mofoka to ask abotu the filter after I clearly posted it is not for sale (and no im not being an :mrmeph: i just cna;t edit my first post.)

[grnappletree14]

do u still have the HKS Carbon Ti Exhaust with 2.5 piping and dummy cat 150

[rps13drfter]

im looking to buy a set of those injectors from you and possibly the fpr if you still have them please let me know asap, thanks

[93sr20240]

is the sr harness plug and play or will I need to switch it over to work in s13 240sx? very interested would love picture thx