Clutch line, what size?

[Jonas427]

I'm doing a 5 speed swap, and I need to run the hard line from the master cylinder, and I wanted to know what diameter that line was. Anyone know?

[g6civcx]

Taka Motorsports for your braided clutch line straight from the master cylinder to the slave. Bolt in fit with no modification. Plus allows you to bypass the clutch damper

It will cost you at least that much to buy the parts.

[ManoNegra]

also really cheap at the junkyard if you're on a budget. I've gone that route and worked fine - i'd get the master cylinder new at Nissan though since it's cheap enough.

[S14DB]

Aftermarket line FTW! Stock line is a pita. Got mine sitting on a shelf.

I got the Agency Power line for $35.
http://img.photobucket.com/albums/v108/S14DB/240sx/Tranny/ClutchLine1.jpg

[ManoNegra]

^ that looks baller. $35 is great price too.

[Jonas427]

Taka Motorsports for your braided clutch line straight from the master cylinder to the slave. Bolt in fit with no modification. Plus allows you to bypass the clutch damper

It will cost you at least that much to buy the parts.
I already bought the Taka Motorsports clutch line that runs from the hard line to the slave. So, I am just going to make my own hard line. I didn't even know that they had that line when I bought the flex line. I probably would have bought that, had I known. Well, making my own line will actually be cheaper, so, it's not all bad I guess.

also really cheap at the junkyard if you're on a budget. I've gone that route and worked fine - i'd get the master cylinder new at Nissan though since it's cheap enough.
Yeah, I already have the master, and the slave, but I just don't see the line being cheaper at a junkyard than just bending my own from the universal lines at the auto parts store. Plus I don't want to make a trip to the salvage yard for it.


Well, thanks for all the replies, and help, but does anyone know what size that line is?

[ChrisJ]

I just got my hard line Directly from Nissan, and cost me about $30

http://img.photobucket.com/albums/v463/240sxFreak/DSCN2152copy.jpg

[S14DB]

I got a hard line out of the junkyard for $1.50. Still sucks incomapre to the AP line.

[Jonas427]

Thanks, ChrisJ. I might try the Nissan place tomorrow, and see how much they want for one.

I got a hard line out of the junkyard for $1.50. Still sucks incomapre to the AP line.
Yeah, I can't get one from a junkyard. There is a junk yard here, with a manual 240sx and they want ridiculous prices for everything. He was saying something like 65 bucks. What a jerk. BTW, where did you get your AP line?

[S14DB]

http://www.driftfactory.com/product_info.php?products_id=2495

[Jonas427]

Damn, I wish I would have know about that a week ago.

[CylonFrakker]

just get the fittings and measurement the length and get one made at a local rubber and hose place. I got my teflon coated stainless steel clutch line for 28 bucks and and its -3 so it was pretty good size.