PDA

View Full Version : S14 ka-t FS in GA


Terminus2k
11-09-2006, 10:25 AM
Make: Nissan
Model: 240sx SE
Year: 1995
Mileage: ~185k on odo. ~120k on motor
Options: SE model every option including leather, abs, and lsd
Mods:
Engine: t3/t4 turbo .60/.63 the bigger one
jgs manifold
tial 38mm wastegate
jgs ss oil feed
front mount with nice piping and greddy type s bov
525cc (50lb) injectors, cobra maf, and jwt ecu tune
custom 3 inch downpipe and test pipe
Blitz Nur Spec Exhaust
Suspension:
Sportline Springs and Kyb Shocks
5 zigen fno1 17x9 +15 17x10 +12 or vice versa...fits very flush
300zx brake conversion in front
Engine: turbo KA24DE comp tested before and after turbo at 170psi in all 4 +/- 2psi Setup is good for 300+ whp..id estimate its at 250-260 now.
VIN#: contact for vin

Condition: 7.5/10 interior. leather has cracks and rips...go figure. no broken interior pieces except drivers door handle...about 5 dollars to replace pretty good shape
7/10 exterior. car was hit in passenger rear. previous owner got a bondo job now the paint is cracking.. not that horrible..but noticable.
car was hit in a parking lot and it messed up the hood..i have a replacement, but didnt put it on bc paint doesnt match.
when pulling the front fenders..i got greedy and put a couple dents in..with a hammer and some time you could pull them out..no paint was damaged.
also door was hit by another door..and paint is messed up.. touchup should fix.. Its really not in that bad of condition..just not leaving anything out

PRICE: 7000 without nav OBO. will remove items such as wheels for lower price.. just make some offers and well go from there..

CONTACT METHOD: pm. email : [email protected] call 706 410 6246

im sure there is more in it than im remembering

pics: http://i119.photobucket.com/albums/o148/kshuler1/DSC00469.jpg
http://i119.photobucket.com/albums/o148/kshuler1/DSC00463.jpg
http://i119.photobucket.com/albums/o148/kshuler1/DSC00461.jpg
http://i119.photobucket.com/albums/o148/kshuler1/DSC00465.jpg

sunny1026
11-09-2006, 10:55 AM
a i think you are asking a lil much but i am still interested.... [email protected] send me pics of interior and everything.... i have cash and i have trade if interested....

Terminus2k
11-13-2006, 09:23 AM
new lower price..also, if interested dont hesitate to offer

BSPerformance
11-13-2006, 03:18 PM
interested in trading for a rebuilt 6 bolt 98 Eclipse GSX
http://www.tristatetuners.com/forum/showthread.php?t=20621&highlight=240sx

RuRoUnI_S14
11-14-2006, 09:04 AM
Any roll or pull needed to fit those wheels? HOws the camber?

Terminus2k
11-14-2006, 10:00 AM
dont want to put any money up for a trade..thanks though, im sure its fast..

yes pull and roll is needed for the wheels..im running -3 right now..i could make it less, but i dont have control arms.

Terminus2k
11-15-2006, 11:00 AM
taking offers. if shipping is needed, and a good offer comes around i might be willing to split shipping, or if a great offer comes, i might pay for it..
any reasonable trades are also welcome. ive got some cash to put on top if needed

1Cute_romeo
11-16-2006, 08:54 AM
take off rim then i will buy it for $4000g right now uz when you really think about it that car mile is way to high for real.

Terminus2k
11-16-2006, 10:57 AM
sure $4000g's sounds amazing. pm me to see where to send the check.
you can barely pick up stock se's for that much. lowest id go without wheels is 6500..ive got more than $3000 alone in the turbo setup.
thanks though

NemeGuero
11-16-2006, 01:05 PM
How'd you rotate your BMC that way??

Terminus2k
11-16-2006, 01:55 PM
i had an abs booster, and there was no way the turbo would fit. so my buddy told me he had a manual non abs one from an s14..well turns out its not from an s14, but it gave me just the right amount of room..worked out pretty well actually. everyone ive talked to said it wont be a problem unless im holding 4gs or more..so im down. makes a 4 bolt downpipe not as bad to deal with

1Cute_romeo
11-16-2006, 08:48 PM
sure $4000g's sounds amazing. pm me to see where to send the check.
you can barely pick up stock se's for that much. lowest id go without wheels is 6500..ive got more than $3000 alone in the turbo setup.
thanks though

ok ok how about 4500 but you have to send me the car tho' really if you think about it that a nice deal right there final offer.

NemeGuero
11-16-2006, 08:52 PM
God you guys are cheap..

$4500? Go buy a civic.

Newbs..

that thing is clean as heck.

webber17
11-16-2006, 10:32 PM
would you be interested in trading for a built ls-vtec turbo civic hatch. e-mail me at [email protected] asap thanks,mitch

Terminus2k
11-17-2006, 01:03 AM
i might be interested in the hatch..for the 4500..ive got a guy intersted in the turbo..ive got a guy interested in the rims and 5 lug also..ill sell you the car stock with 4 lug..
hows that sound romeo..hahah lowballs can suck it

1Cute_romeo
11-17-2006, 08:19 AM
i might be interested in the hatch..for the 4500..ive got a guy intersted in the turbo..ive got a guy interested in the rims and 5 lug also..ill sell you the car stock with 4 lug..
hows that sound romeo..hahah lowballs can suck it

F that I already bought an rx-7 for 25G"S already'''' final offer 4650G take or leave and will not pay by mothes payment'' it all cash right now.

Terminus2k
11-17-2006, 08:21 PM
good for you with your overpriced rx7. i told you.. ill take off all the parts, and sell you a stock s14 for that.
also, willing to part out if reasonable offers come about

brunswick240
11-17-2006, 10:47 PM
Damn man if only you were closer to OH id come check it out, ive got your cash right here

Terminus2k
11-17-2006, 11:26 PM
we can work out some kind of shipping deal...money talks, id love to not have to part it out

fst_trbo240sx
11-18-2006, 12:57 AM
i know this is a nissan forum but i have 4k cash in hand plus a very dependable daily diver 1999 honda accord lx...motor has been unmolested...has body kit wheels and other goodies...if interested at all let me know but if not i totally understand just thought id throw it out there....not trying to lowball you like some other douchebags! plus im your next door neighbor in bham, AL

brunswick240
11-18-2006, 05:49 AM
Man i wish, but ive got like 7800 at most, id feel bad offering that plus shipping.

Terminus2k
11-18-2006, 08:05 AM
id take a look at some pics of the accord, email them to [email protected], not really what im looking for, but we can see.
brunswick. i could take off some stuff, if thats something youd be intereseted in, pm me or email

fst_trbo240sx
11-18-2006, 02:19 PM
bump email sent

brunswick240
11-19-2006, 09:46 PM
pm sent to you terminus

nevaland9
11-20-2006, 10:47 AM
very interested e-mail me some more pics and some pics of the interior also [email protected]

does the car break up at all under full throttle?
hows the stock LSD holding up?

i live in NY picking hte car up wouldnt be a problem

nevaland9
11-20-2006, 10:49 AM
also thats HUGE intercooler piping, when does boost build is the car laggy?

NemeGuero
11-20-2006, 01:18 PM
The IC piping isn't that long.. Mine is pretty much the same length.
KA = torque.. its not laggy

Terminus2k
11-20-2006, 08:54 PM
its realy not that fat either. its 3" cold side, 2.5" hot side. the intake pipe is 3" also. It reaches 8psi at about 2900 or so. and the stock lsd had been taken car of by the guy before me, it holds true and strong

Terminus2k
11-23-2006, 05:00 PM
bump, lowered price due to suspension trade and lowered price all together.

darrell_pruden
11-26-2006, 02:16 AM
pics of interior with nav?

nismostyle240
12-03-2006, 07:54 PM
intrested in wheels and possibly the turbo kit.

OWTKAST cpt
12-03-2006, 08:56 PM
since your willing to sell without wheels are you willing to part those??

Please PM me a price and exact specs if interested.. thanks

240sx_lover
12-03-2006, 09:25 PM
Nice Car!!good Luck Selling!!

Terminus2k
12-07-2006, 04:37 PM
thanks for the good words, lowered price. 7000 OBO, I need to get rid of it fairly quick

dreaMervaj
12-08-2006, 12:08 AM
Part it out. L O L. You know who this is. =) . But if not, good luck with the sale man. I can vouch for this person, he's a great guy to work/deal with.