PDA

View Full Version : silvia headlight wire harness

elixirvtec
10-29-2006, 05:07 PM
Hey i did a search on here and google but couldn't find anywhere that sells a wire harness so I can connect my silvia headlights to my s13. Anyone knows who sells them?
yokotas13
10-29-2006, 05:23 PM
you only have to plug it in
same harness
You have to do some wiring for the fogs, but other than that its a pretty much bolt in
elixirvtec
10-29-2006, 08:56 PM
you only have to plug it in
same harness
You have to do some wiring for the fogs, but other than that its a pretty much bolt in


what do you mean plug it into the same harness. they plugs are different.
Silvia_S13
10-29-2006, 09:07 PM
what do you mean plug it into the same harness. they plugs are different.


ur missing the main harness on the headlight then...
ledzeppelin240
10-29-2006, 11:39 PM
Silvia headlight wiring has been explained over and over again. But somehow people don't understand. I have just about finished re-wiring my entire S13, and the headlights are run through relays now but still it was just pluggin in the old connector to the silvia headlight, and then wiring the fog lights into the relay that is controlled through the pop up switch. Maybe drawing out a wiring diagram would help out though.
!Zar!
10-30-2006, 02:19 AM
All you need to do is unplug the headlights from the pop ups. Then plug them into the silvia headlights.

To get the fog lights to work, find the extra harness left over from the conversion. Then wire the posi/neg to the orange/brown;iirc.

If you want your fog lights to turn on and off independently with the pop up switch, unplug both the retract relays. One is in the driver side relay box, and the second one in on the passenger side relay box.

There are quite a few threads here that explain it. This I am sure of.

Believe it or not some even have pretty colorful pictures for you!!!
It's like a zilvia picture book or some shit.
g6civcx
10-30-2006, 06:12 AM
Go to search. Put in "fog". Look for multiple threads, some of which are from me. All with detailed explanations and pictures.

If you're missing plugs, you need to get spade terminals and match up the wires directly to the bulb as appropriate.