PDA

View Full Version : Z32 Caliper Clearance

Foreva180
10-25-2006, 08:38 PM
I am looking to buy a set of wheels. Here are the specs. 18x8 +45, 18x9 +50. These are Work VS Edition. Mesh with a lip. Any idea will the Z32 Caliper fit or not?? Thanks!!
FinalDrive
10-25-2006, 10:28 PM
I highly doubt it, that is a high offset
dct223
10-25-2006, 10:33 PM
your shopping for the wrong car with those offset #'s
Foreva180
10-25-2006, 10:36 PM
what kind of offset should I be looking for? thanks!
Foreva180
10-25-2006, 10:37 PM
I was thikning I might be able to get by with 10mm spacer =)
mydogsdrift
10-25-2006, 10:40 PM
HAHA! like +20 or +25 if anything. Those are horrible horrible offsets.
Foreva180
10-25-2006, 10:50 PM
so what's the offset i should be looking for? will +37 be decently ok with spacer?
drew935
10-26-2006, 10:37 AM
look at 15 -20 offset wheels for those sizes. Those are like for an s2k.

I believe +35 clears the brakes
usdm180sx
10-26-2006, 10:55 AM
Backspacing has more to do with caliper clearance than offset. But yeah those offsets suck.
gun
10-26-2006, 11:53 AM
try to get some rims where u dont have to run spacers, just get some with a nice offset, im waiting to see how well my rims fit my R33 brakes, they come tomorrow!!
kensreliableb18b
10-26-2006, 12:05 PM
even if it were low offset on those works you'd still need a hi disk to clear the caliper. standard would be chancing it with likelihood of having to run a small spacer.