haltech set-up ka24de

[seanc]

ok so i am going to be running a haltech e8 set-up on my ka24de soon. i was wondering if anyone would mind sharing thier settings with me. the things i mainly want is how to use the stock dizzy for the CAS to controll 4 LS1 coils. thanks in advance.

[Jung918]

Not alot of people run the Haltech on this forum. pm johngriff. He knows alot about it. If you find out, let me know. I was thinking about going to same route.

[steve shadows]

Me and John were actually tossing around the Idea of getting Patch Harness in the works either directing by us R and Ding it or having haltech convinced to make one for the engine. I would be a happy man as well...

Contact me or John I have a link to the backdoor of the site where you can pick out what you need for your setup...PM...

[DreamDriveDrift]

I think Scooter (RBS14) also had a Haltech setup on his ITB'd KA24 then KA-T setup.

[theicecreamdan]

he does .

[DRFT180]

try EFI101.com for some info about haltechs

[johngriff]

Hey guys!

Guess i am late to the party... not quite.

Sean, good to see you are actively pursuing the Haltech, it is the definitive step to pull max power and reliability out of a custom setup.

In regards to what we spoke about the other day on the phone, and your question at hand: You will NOT need the RA-10 Unit to convert the signal from the dizzy to the Haltech. The KA dizzy outputs a Square wave signal, just with a different pulse. I have the setup for this ready for you.

In short, just wire up the Haltech dizzy input to the Haltech, then the ignition outs to those LS1 coils w/built in ignitors and you will be good to go.

Put your mind at ease?

Hit me up if you have any other questions.

John

[seanc]

cool john! it was good talking to you glad to see that RPSport will be helping me out so much. you will either get an order this week or next. lookin forward to doing buisness with you!