Grant
07-07-2002, 02:32 AM
17x8 +35 offset all around
235/45/17 Pirelli P7000 in the front
255/40/17 Dunlop SP8000 in the back..
Tires have more or less 40% tread left (front) 60%(Rear)
I bought the rims from a friend about 2 months ago
there is a slight dent on the lip of one wheel (on the inner side), does not affect balance or the rim itself at all. otherwise rims are in good condition
Will barely clear 26mm z-calipers (kinda rubs against the letters, but can be fixex by sanding down the letters a bit or get a 3-5mm spacer) but not 30mm unless you have spacer.
I'm thinking about switching back to smaller rims or maybe get a different set of 17's..
asking $700. local pickup in Socal Area only.
thanks.
here are some pictures (may take a while to load):
http://home.earthlink.net/~fhsiao/rims/rim1.jpg
http://home.earthlink.net/~fhsiao/rims/rim2.jpg
http://home.earthlink.net/~fhsiao/rims/rim3.jpg
http://home.earthlink.net/~fhsiao/rims/rim4.jpg
http://home.earthlink.net/~fhsiao/rims/rim5.jpg
if you have any questions, feel free to contact me at concept240@hotmail.com
235/45/17 Pirelli P7000 in the front
255/40/17 Dunlop SP8000 in the back..
Tires have more or less 40% tread left (front) 60%(Rear)
I bought the rims from a friend about 2 months ago
there is a slight dent on the lip of one wheel (on the inner side), does not affect balance or the rim itself at all. otherwise rims are in good condition
Will barely clear 26mm z-calipers (kinda rubs against the letters, but can be fixex by sanding down the letters a bit or get a 3-5mm spacer) but not 30mm unless you have spacer.
I'm thinking about switching back to smaller rims or maybe get a different set of 17's..
asking $700. local pickup in Socal Area only.
thanks.
here are some pictures (may take a while to load):
http://home.earthlink.net/~fhsiao/rims/rim1.jpg
http://home.earthlink.net/~fhsiao/rims/rim2.jpg
http://home.earthlink.net/~fhsiao/rims/rim3.jpg
http://home.earthlink.net/~fhsiao/rims/rim4.jpg
http://home.earthlink.net/~fhsiao/rims/rim5.jpg
if you have any questions, feel free to contact me at concept240@hotmail.com