sohc to dohc wiring (still lol)

[Five_5Zigen_4]

H'okay, so, here's the deal..been having a crazy amount of wiring issues with my swap. I'm running a 95 DOHC in an 89 coupe. I have s13 harness, ecu, maf and Dizzy w/ coil. Im getting the ecu to turn on, but nothing in the interior is coming on. The motor turns over and all. I've checked my fuses and made sure that the dash connector was matched up with all the wires. I have the fuel pump hooked up to a kill switch running off a a power wire in the interrior, so the fuel pump isnt kicking on either (basically, no dash lights, no auto seatbelts, no headlights, etc..everything in the inside is NOT getting power for some reason)

Any ideas??

[Duzzes_Wild]

hell im having the same proble using a 96 engine tranny and ecu and engine controll harness, still using the s13 chassis auto harness though

[LookOut Nick]

The first Sticky in ARCHIVE/FAQ (http://www.zilvia.net/f//showthread.php?t=33502)

Are you using a Dohc body harness connector?

[CrazedPanda]

Ive seen a lot of post reguarding swapping a whole SOHC KA engine for a DOHC. But I have a SOHC in my car now with relativly low miles and all im looking to do is swap the head, intake, exahust, etc. Does anyone know if thats even possible and what is actually involved with converting it to DOHC?