View Full Version : Please Help Removing Thermostat on SOHC.
danger69
10-11-2006, 09:45 AM
Okay I'm stuck at basically what to take off after my intake. I know the clutch fan shroud is blocking me and th clutch fan. I tried looking around as to how to take the shroud off but don't see how I can do that. Also is removing the clutch fan a matter of 4 bolts on the front? PLease help this is the last thing thats holding me back from running my car.
LB.Motoring
10-11-2006, 09:57 AM
ok, your gonna have to take your pink gloves off for this one.... the shroud has bolts... like 8mm or 10mm should be obvious...
I think you would learn alot if you bought a manual, and just did it all yourself, You would find it to be a nice learning experance.
punxva
10-11-2006, 10:14 AM
yea its really a simple procedure, just grab a manual, or hell they are online too for free if you search zilvia hard enough you'll find a link to them, and have at it
danger69
10-11-2006, 10:15 AM
I tried grabbing those FSM online but those don't tell me how to remove any of those parts. Only how to test them.
!Zar!
10-11-2006, 10:19 AM
Just unscrew the four screws holding the clutch fan on...
Then remove the pulley and the clutch fan.
Replace your waterpump and thermostat.
Reinstall.
Fill and bleed your coolant.
ladiesman8527
10-11-2006, 10:21 AM
just get in there and look around. its easy. just be careful not to break the shroud when u remove it. the old brittle plastic is fragile.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.