FS 350Z drill/slot rotors ,for 300zx cailpers use BIG !!!!!!!

[Alan_no.1]

I have 2 set of EBC drill/slot rotors(for brembo cailpers)!!!!! u can use this

with 300zx cailper!!! all u need is the adapter bracket from SPL parts!!!!!!

http://www.splparts.com/doc/GTR33BrakeRotor/default.htm

$150 for each set new in box!!! or best offer!!!

I buy it $200 for each!! :duh:

http://photos.friendster.com/photos/40/04/21774004/32461935010766l.jpg

[vutony]

how much bigger are the rotors compared to the z32

[GSXRJJordan]

they're just under 13", so its about an inch bigger. Note that just because you get bigger discs doesn't mean you get more stopping power - that comes from bigger calipers (and to a lesser extent, different pads). What you get is big brake ultra bling, and more fade resistance.

Good price on those discs though ~

[anthony240]

"Larger brake rotors, even with stock calipers, can provide a significant improvement in braking over stock rotors. The larger diameter moves the caliper further from the center of the hub, which gives the caliper more leverage thus increasing brake torque (with the same pedal pressure and pad friction). The larger rotors also have more thermal mass, which reduces brake fade." --SPL

so yes it does improve stopping power, especially on an S-chassis car with Z32 brakes. adapter is $180, well worth the upgrade.

[Alan_no.1]

They r 12.8 or 12.7 .......but u can say 13". IT just for better looking!!