Question about changing BOV's....

[Shawn_of_the_Dead]

Okay guys, I have a simple question some may think is dumb, but I honestly dont know.

I currently have an HKS Direct port Super BOV. For reference...this is it.
http://img208.imageshack.us/img208/2592/dsc05804it2.jpg



Now as you can see...I have two hoses that connect to this BOV and they both run back to the TB. For reference again...another pic.
http://img176.imageshack.us/img176/6783/dsc05798ki6.jpg


I am changing to the HKS SSQ and of course it only has one place for a hose to connect. Am I correct in assuming I just need to plug the other one? The hoses are clearly two diff sizes as well, so I just take the one out of the two that fit and plug the other right?

Thanks for any help guys/gals.

[rico05]

Yeah, the SSQV does not need the 2 vac signals to operate. Just plug the other one.

And FYI: My SSQV works best on full hard, but since I am still MAF'ed, it runs SSSSOOOOOOOOOOOOOO much better recirculated than vented.

[chmercer]

throw a vac cap on that bad boy and roll into the setting sun

[Shawn_of_the_Dead]

thanks guys, that's what I thought...just wanted to make sure.

:D

[CylonFrakker]

what you gonna do with your old super port bov?