PDA

View Full Version : Has anyone rocked old Pontiac Trans Am GTA Wheels?

bstonedrift
10-01-2006, 08:48 PM
Looking for info because I found a set in a local junk yard that I might get.

THEY ARE 16X8
+16 OFFSET AND THE OTHER 00

http://i4.ebayimg.com/06/i/08/85/0a/ce_3.JPG

This other Ebay add says;
YOU CAN ALSO MAKE THESE FIT A RX-7 S13 OR S14 OR ANYTHING WITH A 5X114 BOLT PATTERNS JUST HAVE YOUR LOCAL RIM SHOP PUT INSERTS IN THEM LIKE WE DID WITH THE RX-7 YOU SEE IN THE PIC

http://i20.ebayimg.com/06/i/08/75/b6/6d_1.JPG

http://i7.ebayimg.com/03/i/08/78/ef/39_1.JPG
'90RPS13
10-01-2006, 08:55 PM
You will need to be 5 lug. Other then that I believe it will bolt up. they are the same as Riken. *a
HyperTek
10-01-2006, 08:56 PM
hmm i dont think ive seen that.. but those look fucking awesome on the fc!
bstonedrift
10-01-2006, 08:59 PM
Yeah, they do look alot like the Rikens. But smaller. But what about that part about using an insert... rubbish?
'90RPS13
10-01-2006, 09:13 PM
if i am not mistaken, some FC's came in 4 lug, so you would need spacer/adaptor to fit 5 lug. If you are 5 lug converted, no worries. *a
SoSideways
10-01-2006, 09:19 PM
GM bolt pattern = 5x120mm
bstonedrift
10-01-2006, 09:25 PM
$hit. 5x4.75

Shoulda done better research.

Thanx guys.
Yuri
10-02-2006, 10:52 AM
Look for mustang wheels instead.
4-lug mustang = 4x114.3
5-lug mustang = 5x114.3

Also Ford LTD's had some mesh wheels that were 15x8 +10 that will bolt up.
ayuaddict
10-02-2006, 02:30 PM
except for the "fox body" mustangs or whatever, i know those have a 4x4.25 bolt pattern for some odd reason. (4x114.3 = 4x4.5)