PDA

View Full Version : Messed up my window...fixable?


Keith240
09-27-2006, 06:50 PM
So my drivers side window was having a really hard time rolling up and down so I pulled the door panel off to take a look. The cable that runs throughout the door to raise and lower the window was fraying and this was causing parts to jamb, thus being hard to roll up or down. Long story short I ended up snapping this cable. Is there anyway to fix this if I have another door laying around I can get parts from, or am I screwed? Thanks.

koukimonster139
09-27-2006, 07:10 PM
1. stop taking your car apart.
2. go to a junk yard/ebay
3. buy one for $1.29

chmercer
09-27-2006, 07:10 PM
get some cable and a couple of cable clamps from home depot and patch it

Keith240
09-27-2006, 07:28 PM
So it is possible to just replace the entire cable? I don't really want to patch it because the thing is frayed all over.

P4rD0nM3
09-27-2006, 08:18 PM
Of course it is. It's a car. Junkyard ftw.

projectRDM
09-27-2006, 10:32 PM
I'll be nice. The cable is not repairable. Replace the regulator.