FS: *NEW* Garrett GT2871R (.64)

[thoraxe]

Location: Atlanta, GA
Description:
Internally wastegated, true dual ball-bearing, water-cooled center housing Garrett GT2871R. Turbo is *brand new*. Purchased for a project car but never installed or used. This is the best version of the GT2871R available, the -15 part number, featuring a 0.64 a/r turbine housing for ultra-quick spool and great throttle response, with the “modified T04B” compressor housing (much more efficient than the T04E housing).

GT2871R specifications
* Turbo part number 472560-15
* CHRA part number 446179-67
* Compressor Inducer Diameter 51.2mm
* Compressor Exducer Diameter 71.0mm
* Compressor Trim 52
* Compressor A/R 0.60
* Turbine Wheel Diameter 53.8mm
* Turbine Trim 76
* Turbine A/R 0.64
* Suitable Displacements 1.8L – 2.7L
* Horsepower 280 - 460

You will need:
* Compressor backplate O-ring (can use the same as the GT2860RS turbo part number 739548-1. I don’t know the PN for the o-ring itself, sorry)

* Wastegate actuator (can reuse from any other T28 or T25 turbo)

http://gallery.cavernprojects.com/temp/turbo.jpg
This turbo is sold.

[GSXRJJordan]

so if it's brand new, why do you need the O ring? it's the one on the inside, between the housing and the "body" right?

[thoraxe]

We had removed the housing to clock the turbo and I mangled the O-ring, then lost it when I set it aside to get a new one :( I am trying to find the P/N but any place that sells Garrett should be able to provide the ring -- it's probably $1.50

[ghostracing]

where are u located

[thoraxe]

I am located in Atlanta. If you give me a zip code I can estimate the shipping, but I figure it will probably be about $30 -- turbos aren't the lightest things in the world.

[thoraxe]

This turbo is now on Ebay.