Bee R Rev Limiter install problem

[sil_8t]

i just got a rev limter and i tried to install it today but i ran into a problem. i cant figure out which wire on the ecu plug is the ignition wire! ive searched but didnt get a clear answer. the most ecu's say # 36 is the wire im looking for but thats how its wired right now and it doesnt limit the rev like its supposed to, but the light comes on when i hit the selected rpm. according to bee r 's web page im wrong on the wiring, but i cant read japanese. i tried going to apexi's website and pull up there pin out because it worked for my safc2 install but its down or something.

the wire that ive got hooked up right now is black / white or light pink ive read that its supposed to be black/red, but thats on the other side of the ecu and i think thats #4 injector so i dont wanna cut that off!


and the rpm is ok b/c i got it on afc and the light comes on!


thanks, john

[sil_8t]

if any one knows please just point it (pin) out.
http://nissaninfiniticlub.net/photopost/data/500/17540where_the_fuck.JPG

[sil_8t]

ok i got it. i was following some online directions that seemed pretty well done but apparently it was wrong, it needs to be hooked up to the 1 deg and 180 deg, wires on the ecu.