sr20det part out GT2871R set up

[b180sx]

*GT2871R turbo on megan racing manifold with megan 3" turbo elbow-$1100 (turbo has less than 200 miles on it..so its still kinda new)
* Hybrid Performance custom aluminum intake with couplers for GT2871R-$175
*z32MAF W/ plug and K&N filter-$175
* TAKA steel braided lines/oil/water-$125
*enthalpy tuned ECU for 650cc injectors and z32 maf-$450
* Touge Factory 650cc injectors with fuel rail-$300
*built HEAD w/New nissan OEM valve stem guides, exhust guides Etc.-$175
*COMP valve springs-$60
*ARP head studs-$100
*Greddy rocker arm stoppers-$60
*SR tranny with exedy stage II clutch-$375
*sr20det harness-$300
*Touge factory 3"FLEX down Pipe with 3"Test Pipe-$160

**OR-Complete plug and play package setup $2165 for turbo/manifold/turbo elbow/z32maf/custom aluminum intake with k&N filter/650cc injectors/Enthalpy TUNED ECU

this is a great platform bolt on set up for about 320-330 HP or even more with add ons...
GT2871R has quick spool response
all these parts are relatively new due to car not even running over 200 miles...
the reason why im selling is because i spun a rod bearing so everything is good besides the block..

pm or email me... [email protected]

[trybal]

why won't someone buy my bike now so i can buy this :(

[b180sx]

yes someone buy his bike...

[trybal]

lol, if only i had it posted on here. good luck with the sale man

[defiantmofo]

pix of aluminum intake?

[GSXRJJordan]

what are the specs on the valve springs? OEM replacement or stiffer for a big cam? Also, what springs/cam is in the head, if any?

[Id RaThEr DrIfT]

were are u located? and how much just for the turbo i have the elbow and megan exh manifold so yeah lmk

[allblackS14]

PM'd you about Valve springs

[b180sx]

pix of aluminum intake?

ill try to get the pix up today...

[b180sx]

what are the specs on the valve springs? OEM replacement or stiffer for a big cam? Also, what springs/cam is in the head, if any?
all i know is there comp springs and people who have used them said there pretty good.. i got them straight from comp factory here in memphis. stock cams in the head is has a pending sale for the complete head. so ill let you know

[b180sx]

were are u located? and how much just for the turbo i have the elbow and megan exh manifold so yeah lmk
i stay in memphis... i sent you a pm

[allblackS14]

what are the specs on the valve springs? OEM replacement or stiffer for a big cam? Also, what springs/cam is in the head, if any?

Stiffer for bigger cam

"

SPRING-----SPRING-----RATE @[email protected]
TYPE ------HEIGHT-----1.339-------1.200---------BIND
[email protected] REST-----(34mm)------(30.48mm)-----HEIGHT

Stock------1.975------110 lbs------147 lbs------1.082
Greddy-----1.910------120 lbs------159 lbs------1.045
HKS--------1.902------113 lbs------147 lbs------1.099
Comp-------1.902------134 lbs------168 lbs------0.960
Ferrea-----1.892------148 lbs------189 lbs------0.960
BC --------1.953------140lbs-------175lbs------0.940 "

Taken from Fresh Alloy http://forums2.freshalloy.com/showthread.php?t=115672&highlight=valve+spring

[b180sx]

thanks man that helps.:)

[florante rea]

just need the turbo.pm for price.

[b180sx]

no longer parting out sorry guys....please lock thread. thx