how to run stock 11 lbs boost on t25 without a boost controller?? (pix)

[Id RaThEr DrIfT]

oay so i heard that u could run 11 lbs with out a bc by switching some lines/hoses .... so im trying to find out if its true and if so what hoses/lines do i switch and to wear ????

this is the area i was told u switch the lines from i was told that not all 240's have this part and not everyone knows about it so if u can help me out that would be great thanx!


http://i21.photobucket.com/albums/b274/Studgus/18098b36.jpg
its were u see the lil orange things holding the hoses
http://i21.photobucket.com/albums/b274/Studgus/81640d21.jpg
lmk if its true guys and if u know how thanx

[nrg]

wow, who the hell did your motor install? they kept the ignitor on the driver side :hammer:
oh yea, i dont think it's true, most people get rid of all that crap.

[HyperTek]

wow, who the hell did your motor install? they kept the ignitor on the driver side :hammer:

LMAO i was thinking the same thing lol.

Yah usually people delete that whole "solenoid" thing and straight tap the hoses to thier destination.

One way to raise boost is to "shim" the actutator or something

[SiI40sx]

http://phase2motorsports.stores.yahoo.net/hksturackits.html

its only a hundred bucks dude come on!! safer too since with a boost controller your stressing an acuator that isnt ment to hold most boost than its suppose to and with crappy b/c u can fuck some shit up =P hks actuator ftw

[Id RaThEr DrIfT]

wow, who the hell did your motor install? they kept the ignitor on the driver side :hammer:
oh yea, i dont think it's true, most people get rid of all that crap.
haha yeah some shop dont even wanna say any names lets just say they fucked it all up bad after getting it out i still had 2 other shops and my self work on it to make it run right as a matter a fact it bearly started to run good this week .... so i guess ill just wait till i get a bigger turbo and then do it the right way and get a electronic bc well thanx anyways guys

[drifter808]

get the HKS actuator like already posted. Its great and works flawlessly. Im running it and have no complaints.

[S14DB]

18psi FTW
http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-WGT-022&Category_Code=WGT

[Nismo240SX]

12psi HKS here, works great. don't have to worry about spikes from a boost controller either.

[bongnak]

http://www.zilvia.net/f/showthread.php?t=62607
read that theres some info on it; the solenoid

[Shawn_of_the_Dead]

There is a few good things listed here, and shimming the actuator is one of them.


http://www.royalpurple.com/dragsport1/ds1p1.html

[komedy]

so by replacing just the stock actuator to a HKS actuator i can boost to 12psi safely with any other mods like intercooler, maf, injectors on a stock sr20det redtop????

[komedy]

sorry let me refrase that without anyother mods such as fmic,bigger maf, hi flow fuel pump or should i have all these installed before changing the acuator???

[emersonLP]

I would get a fuel pump first at the very least. It was recommended to me to put one in during my swap. I went with the inexpensive walboro 255. MAF you dont need until you get bigger injectors and bigger turbo. I am installing my fmic before upping the boost simply because it is really hot here in Georgia and I need that front mount.

[Id RaThEr DrIfT]

well i have a mbc in all realy but its wiered it only hold 11 sometimes if i hold the throtle 75% down if i hold it all the way it will only hold 7 i think i might just get an hks

[kensreliableb18b]

get rid of that solenoid crap

[trsilvias13]

the oem location for the ignitor chip is in that location.