noodl35
08-14-2006, 03:41 PM
I would like to trade my clean 97 black 240sx SE (No ABS,VLSD) for your clean good condition 97 or 98 stock 240sx SE + CASH! I would prefer the trader to be in the midwest or somewhat local to me. Reason I want to trade for a stock 240sx is because I would like to start over and probably do a fully built KA-T.
BAD: Has a small crack on the lower crown of the bumper, not really noticable. Tranny shifts a tad rough, im going to put some mt-90 in soon. Rear driverside fenderwell has a small dent under the lip (barel noticable as well). Take a look at the pics and see. Probably needs new O2 sensor
140k on chassis
40k miles on sr20det
Specs:
Redtop sr20det
walboro fuel pump
Nismo Motor Mounts (2 engine mounts, tranny mount)
Nismo thermostat
Nismo Clutch Pivot
Koyo Aluminum Racing Radiator
Permacool E-Fan
Walboro 255lph Fuel pump
z32 fuel filter
ARC Induction BOX
Greddy pulleys (alternator, p/s)
ARP Headstuds
New OEM Headgasket
Bought gasket kit and replaced all gaskets
Greddy Oil pan
Greddy Rocker arm stoppers
ACT street clutch kit
ORC Flywheel
Megan Ex. Manifold, dump pipe, test pipe
URAS Exhaust
Cusco Zero 2 Coilovers (only 9k miles on them)
Cusco RUCA's
Kazama Tension Rods
XS Power FMIC Kit
Blitz DUAL Spec-S Electronic Boost controller
Megan Boost gauge
Just put brand new Kumho ASX tires on about 2k miles ago
Brembo Bradi Rotors Cross Drilled & Slotted (all 4) (1,000 miles)
PBS Metal Master Brake Pads (1,000 miles)
If I were to SELL it the asking price would be $12,500 OBO.
Here are some pics:
http://members.cox.net/noodles1/s13_and_s14_003.jpg
http://members.cox.net/noodles1/s13_and_s14_020.jpg
http://members.cox.net/noodles1/s13_and_s14_021EDIT.JPG
http://members.cox.net/noodles1/s13_and_s14_024.jpg
http://members.cox.net/noodles1/s13_and_s14_027.jpg
http://members.cox.net/noodles1/s13_and_s14_032.jpg
http://members.cox.net/noodles1/s13_and_s14_034EDIT.JPG
Email me at [email protected]
or
AIM me at noodl35
HERE ARE SOME NEW UPDATED PICS!!!!!!!
http://s104.photobucket.com/albums/m162/idjnoodz/
Thanks.
-David
BAD: Has a small crack on the lower crown of the bumper, not really noticable. Tranny shifts a tad rough, im going to put some mt-90 in soon. Rear driverside fenderwell has a small dent under the lip (barel noticable as well). Take a look at the pics and see. Probably needs new O2 sensor
140k on chassis
40k miles on sr20det
Specs:
Redtop sr20det
walboro fuel pump
Nismo Motor Mounts (2 engine mounts, tranny mount)
Nismo thermostat
Nismo Clutch Pivot
Koyo Aluminum Racing Radiator
Permacool E-Fan
Walboro 255lph Fuel pump
z32 fuel filter
ARC Induction BOX
Greddy pulleys (alternator, p/s)
ARP Headstuds
New OEM Headgasket
Bought gasket kit and replaced all gaskets
Greddy Oil pan
Greddy Rocker arm stoppers
ACT street clutch kit
ORC Flywheel
Megan Ex. Manifold, dump pipe, test pipe
URAS Exhaust
Cusco Zero 2 Coilovers (only 9k miles on them)
Cusco RUCA's
Kazama Tension Rods
XS Power FMIC Kit
Blitz DUAL Spec-S Electronic Boost controller
Megan Boost gauge
Just put brand new Kumho ASX tires on about 2k miles ago
Brembo Bradi Rotors Cross Drilled & Slotted (all 4) (1,000 miles)
PBS Metal Master Brake Pads (1,000 miles)
If I were to SELL it the asking price would be $12,500 OBO.
Here are some pics:
http://members.cox.net/noodles1/s13_and_s14_003.jpg
http://members.cox.net/noodles1/s13_and_s14_020.jpg
http://members.cox.net/noodles1/s13_and_s14_021EDIT.JPG
http://members.cox.net/noodles1/s13_and_s14_024.jpg
http://members.cox.net/noodles1/s13_and_s14_027.jpg
http://members.cox.net/noodles1/s13_and_s14_032.jpg
http://members.cox.net/noodles1/s13_and_s14_034EDIT.JPG
Email me at [email protected]
or
AIM me at noodl35
HERE ARE SOME NEW UPDATED PICS!!!!!!!
http://s104.photobucket.com/albums/m162/idjnoodz/
Thanks.
-David