s14 ST sway bar endlink?

[99maxgtr]

can someone tell me the size/part # or where i can get the endlinks for suspension technique sway bars? thanks..

[slider2828]

Build it from Lowe`s or homedepot dude... Basically go to orchards look for a grade 8, bolt that ｉｓ roughly the size of the whole in the ST sway. Get a 2" steel pipe that wraps around ｔｈｅ　ｓｃｒｅｗ　in the ST sway．　Ｇｅｔ　ｓｏｍｅ　ｗａｓｈｅｒｓ　ａｎｄ　ｂｕｓｈｉｎｇｓ　ａｎｄ　ｙｏｕ　ａｒｅ　ａｌ ｌ　ｓｅｔ．　ｓｏ　ｉｔ　ｋｉｎｄａ　ｌｏｏｋｓ　ｌｉｋｅ　ｔｈｉｓ．．．

ｎｕｔ
ｗａｓｈｅｒ
ｂｕｓｈｉｎｇ
ST　Ｂａｒ
Ｂｕｓｈｉｎｇ
Ｗａｓｈｅｒ

Ｐｉｐｅ

Ｗａｓｈｅｒ
ｂｕｓｈｉｎｇ
ａｒｍ
ｂｕｓｈｉｎｇ
ｗａｓｈｅｒ

Ａｎｄ　ｔｈｅｎ　ｔｈｅ　ｂｏｌｔ　ｇｏｅｓ　ｔｈｒｏｕｇｈ　ａｌｌ　ｏｆ　ｔｈａｔ．．．．．　Ｔｈ ｅ　ｐｉｐｅ　ｉｓ　ｕｓｅｄ　ａｓ　ａ　ｐｌａｃｅ　ｈｏｌｄｅｒ　ｓｏ　ｙｏｕ　ｈａｖｅ　ｔｅｎｓｉ ｏｎ　ｏｎ　ｔｈｅ　ｂａｒ．　Ｎｏｗ　ｔｈｅ　ｐｉｐｅ　ｓｈｏｕｌｄ　ｂｅ　ａｒｏｕｎｄ　２－２．２ ５　ｉｎｃｈｅｓ　ｌｏｎｇ．　Ｉ　ｄｕｎ　ｒｅｍｅｍｂｅｒ，　ｊｕｓｔ　ｍｅａｓｕｒｅ　ｉｔ　ｆｒｏ ｍ　ｔｈｅ　ｓｔｏｃｋ　ｅｎｄｌｉｎｋ．　

[DJ_Sunrise]

if it didnt come with endlinks, then it isnt manufacturer specific. go on ebay and pick new front and rear endlinks up that are stock style or replace your stock bushings is all..

[cosmoworks]

if it didnt come with endlinks, then it isnt manufacturer specific. go on ebay and pick new front and rear endlinks up that are stock style or replace your stock bushings is all..

The ST sways don't use stock style endlink connections. You could probably use a generic energy suspension endlink setup such as this one:
http://store.summitracing.com/partdetail.asp?autofilter=1&part=ENS%2D9%2D8118R&N=700+115&autoview=sku

-Cosmo

[az_240]

I have the st bar and end links sitting in my room... if you need a pic of the endlinks pm me

[projectRDM]

Go to ST's site, they have a breakdown and parts listing for the hardware.

[DJ_Sunrise]

any idea if those will fit s14 rear? :D

[slideways2004]

The ST sways don't use stock style endlink connections. You could probably use a generic energy suspension endlink setup such as this one:
http://store.summitracing.com/partdetail.asp?autofilter=1&part=ENS%2D9%2D8118R&N=700+115&autoview=sku

-Cosmo

vatozone sells endlinks like that. i think the brand is energy suspension and it's polyurethane