JDM bumper, how did you mount your plate?

[khilgers]

I just received my JDM kouki rear bumper, and I was wondering how most of you guys mounted your license plate. The USDM one has a tab for it to mount too, but the JDM one doesn't.

PIC
http://www.khilgers.com/forumpics/jdm1.jpg

[k0uki]

i used zipties, works great

[TurDz]

Industrial Strength double-sided tape...let it sit on the bottom of the bumper edge for more support..

[khilgers]

how did I know someone was gonna say zipties. What would us Nissan guys do without them :)

[khilgers]

Industrial Strength double-sided tape...let it sit on the bottom of the bumper edge for more support..

I'm guessing clean the plate and bumper nice and good, then stick er' on. Any problems with it? Can I get the double sided tape at any local car parts store?

[TipStylez]

i wouldnt look at a car parts store, more like home depot or somthing liek that. And dont get the white ones, get the black one.

[khilgers]

i wouldnt look at a car parts store, more like home depot or somthing liek that. And dont get the white ones, get the black one.

not the white puffy stuff, but the black stuff with red on the back. Correct?

[g6civcx]

Advance carries mounting tabs for use with M8 or M10 bolts. You will have to redrill the tags since JDM holes are wider apart.

[khilgers]

Advance carries mounting tabs for use with M8 or M10 bolts. You will have to redrill the tags since JDM holes are wider apart.

I don't really want to drill into my new plates.

[g6civcx]

Then you have to do something else.

[usdm180sx]

3M oem approved double sided moulding tape will hold through a nuclear war. It owns everything.