lots of S14 stuff for sale + 5 speed swap + wheels

[aNskY]

17"x8" 4x114.3 +35 5zigen fn01rc's. Matte black. 2 have 75% 235/45/zr17 and 2 have BRAND NEW 225/45/zr17 cooper zeons. $600

sohc 5 spd tranny. no grinds but dirty $100
dohc 5 spd tranny. 97 with 73k miles. $200

3" dual n1 replica (ssa) catback with modded hangers (was too low) $125

3" straight through test pipe $30

s14 dash good shape no cracks $200

interior trim. i have everything except the radio trim. offers

s14 fuel pump $10

Eibach sportlines on KYB AGX adjustables $300


every other suspension part offers

Front brembo drilled/slotted rotors $50

s14 trunk lid with wing RED good condition $100

s14 headliner $25

heater core $25

ac condenser $25

passenger airbag $25



ABS system (controller, hardlines, calipers) $100




S14 rear bumper RED $25

zenki tail lights $50

S14 open differential $50

S14 rear subframe with new energy suspension polyeurothane bushings installed $200!

97 ka24de alternator $20

97 ka24de starter $20

97 ka24de head complete with intake manifold $150

97 ka24de block $150

other misc engine parts offers


i have other parts as well just post what you need and ill get back to you. all prices are before shipping! i am located in poughkeepsie, new york zip is 12603

[reflexdb]

how much for diff shipped to 80503? thanks

[aNskY]

bumpbumpbump

[k0uki]

willing to do 100 shipped for the driveshaft?

[carlos9984]

how much for the Lip shipped to 94401

[aNskY]

shipping is expensive on that stuff.

i will do 130 shipped on the DS

85 shipped on the lip

[yoinkAzenki]

If you still have the lip send me info and pics. [email protected] Will pay for shipping to 91304.

[aNskY]

no pics right now will get pics tomorrow will do 95 shipped to cali

[outlaw9958]

do you have zenki turn signals?

[skifux21]

what color is the hood is there any dents? also on the 5 speed swap stuff can it be swapped in a abs zenki?

[Berzerker]

Im also interested in 5spd parts, clutch hardlines, clutch pedal, slave/master cylinders. Drive shaft, let me know thanx.

[574-240sx]

care to part with the vehicle speed sensor?

[blu2fourty]

pm'd about the 5spd swap

[driftenthusiast]

If subframe is available in 1 month il come pick it up.

[BoogyManNN]

do you have a power window motor??

[Zilvia4eva]

pm me if you still have the SE lip........

[aNskY]

heres some pics...


Lip. not as bad as it looks, its not cracked, it just needs some sanding and paint

http://i4.photobucket.com/albums/y126/ansky3351/lip.jpg

front end (think its spoken for)

http://i4.photobucket.com/albums/y126/ansky3351/frontend.jpg

rear bumper, trunk lid / wing is also for sale

http://i4.photobucket.com/albums/y126/ansky3351/rear.jpg

wheels

http://i4.photobucket.com/albums/y126/ansky3351/wheels.jpg

[brunswick240]

Do you still have the lip? Might be able to paypal you tonite. LMK

[aNskY]

no one has claimed it yet

my paypal is [email protected] if anyone wants dibs on anything

evrything is getting taken apart starting wednesday

[aNskY]

do you have zenki turn signals?


are you talking about the signals in the bumper? if so, im gonna have to include them with the bumper, like i said i think its spoken for. sorry.

i do have a lot of other random parts, coming out of the 95 or a 97 so post up whatcha need

[aNskY]

bumpbumpbump

[k0uki]

hey ill take the manual abs driveshaft if your willing to wait til thursday when i get paid, lemme know

[aNskY]

i guess i kinda have to include the driveshaft with the 5spd swap. not sure though. i think i have a buyer for it so i will let you know soon. until then, consider it sold.

LIP IS SOLD

AND I THINK FRONT END IS GONE TOO. that means no lights, fenders, bumper, hood.

everything else is still up for grabs. parting out pretty much everything!

[k0uki]

i guess i kinda have to include the driveshaft with the 5spd swap. not sure though. i think i have a buyer for it so i will let you know soon. until then, consider it sold.

well lemme know if your willing to part it. thanks

[aNskY]

bump for updates

[240's"r"us]

how much for the 5speed swap stuff shipped to 37849?

[aNskY]

i dunno, i will ship it but you arrange shipping. i will authorize a freight company to come pick it up if you set it up. i really dont think UPS/fedex/dhl will ship a tranny.

[chuy]

Pm me about the head liner

[aNskY]

Pm me about the head liner

what do you want to know? its gray.

[aNskY]

i also have a ssa sr20 turbo manifold on ebay (where all of my stuff is gonna end up if it doesnt sell soon)

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=110039499602&ih=001&sspagename=STRK%3AMESE%3AIT

[NISMO500]

Do you have the wiring harness

[aNskY]

i have all the harnesses except the engine harness.

[n97240]

how much for the dash shipped to 32776? Thanks

[aNskY]

how much for the dash shipped to 32776? Thanks


$325

.............

[Zilvia4eva]

$375 shipped for...5spd parts

-hardline
-master cylinder
-clutch pedal
-complete drive shaft
-5spd lower harness
-flywheel/w MT-bolts
-tranny bolts
-s14 motor backing plates
-tranny dust shield

...everything except,clutch,ecu,and tranny


please pm,serious buyer

[ZsHatch]

what up man, Where in NY do you live, i ll do local pickup, how far are you from queens?

[ilike2drive21]

is the 5 speed still available, how much for it shipped with out the tranny to houston tx let me know

[aNskY]

$375 shipped for...5spd parts

-hardline
-master cylinder
-clutch pedal
-complete drive shaft
-5spd lower harness
-flywheel/w MT-bolts
-tranny bolts
-s14 motor backing plates
-tranny dust shield

...everything except,clutch,ecu,and tranny


please pm,serious buyer

pm sent


what up man, Where in NY do you live, i ll do local pickup, how far are you from queens?

hour and a half from you
12603

[ass15]

Ansky: wanna sell me just the s14 cd dash?

[aNskY]

what do you mean by cd dash?

[silentstyle1]

Hey interested in the airbag, dash, and rear bumper. send info to [email protected] and could you find out what the shipping would be to 01801.

thanks

[ass15]

cd dash trim? [email protected]

[ass15]

oooops repost

[matt20prt]

do you have the power steering pump and lines, if so, how much shipped to 32826

[aNskY]

i am not shipping the dash or the bumper. sorry.

if by cd dash you mean the radio trim that always cracks... it's cracked

do you have the power steering pump and lines, if so, how much shipped to 32826

i have the pump and the lower line.

$50 sound fair?

[Spike1158]

Want a passenger side window motor, willing to go $65... u got it???

[5t341tH]

u got any pics of the n1 dual catback??

[aNskY]

Want a passenger side window motor, willing to go $65... u got it???


consider it sold, you can paypal [email protected]


5 spd swap is SOLD
tie rods are SOLD
front control arms SOLD

ka clutch kit is available, like new. not sure what kind it is though. sellign cheap
no pics of exhaust at the moment, i have them but it wont let me download for some reason. will have pics of some stuff up soon.

[staygold24]

interested in exhaust. pm sent

[xxdjfate76xx]

how much for the driver side pillar

[aNskY]

$30 shipped


ttttttt

[silnismo]

Hey man, ill buy those KYB AGX/Eibach, im located in jersey.
CASH IN HAND!!!! RDY 2 BUY!
email me at. [email protected]

[aNskY]

Hey man, ill buy those KYB AGX/Eibach, im located in jersey.
CASH IN HAND!!!! RDY 2 BUY!
email me at. [email protected]


email sent


tttttt

[aNskY]

need to get rid of all this stuff

http://i4.photobucket.com/albums/y126/ansky3351/exhaust.jpg

http://i4.photobucket.com/albums/y126/ansky3351/exhaust2.jpg

[stickyrice]

you got driverside power window motor??? how much?? email me at [email protected] thanks

[5t341tH]

can i get some info/pics on the tein tierods and ends?
r they in good condition and will they fit an s13?

EDIT: NVM saw that u sold it already

[aNskY]

you got driverside power window motor??? how much?? email me at [email protected] thanks


yep

$40 shipped

[DoriftoPnoy]

lol that lip.... i see this is who my bro got it from. got it sanded down and painted. looks good as new.

[aNskY]

lol that lip.... i see this is who my bro got it from. got it sanded down and painted. looks good as new.

just like i said, needed sanding + paint :) glad it went to a good home

[aNskY]

more pics of stuff

corner windows $100 ea.

http://i4.photobucket.com/albums/y126/ansky3351/parts1.jpg

window amp $40

http://i4.photobucket.com/albums/y126/ansky3351/parts2.jpg

window trims $50 per side

http://i4.photobucket.com/albums/y126/ansky3351/parts3.jpg

b pillars and bottom rear plastic trim $25 each

http://i4.photobucket.com/albums/y126/ansky3351/parts4.jpg

[Zilvia4eva]

Hey man....check your pm box



I need the tracking info for the 5spd parts

[aNskY]

lowered prices on almost everything!

[IMPerfection]

Is the open diff still in the pumpkin? If I were to buy it, could you ship it directly to Luke in Cali to weld it for me (it usually costs $49 to ship a full differential in a pumpkin from my location in FL to him, so I'd expect it to be approximately the same for you).

PM me back, in case of the slight possibility I forget I posted in this thread.

[juls213]

Hey do u have still have the front bumper or the right front bumper? Is the exaust still for sale? how about 5 speed swap? I am located in NJ, Please email me at juls213 because I dont check this website often

[AceInHole]

Interested in the brake booster. PM me if it's available.

[aNskY]

Hey do u have still have the front bumper or the right front bumper? Is the exaust still for sale? how about 5 speed swap? I am located in NJ, Please email me at juls213 because I dont check this website often


i do have the exhaust. bumper and 5spd are sold. would email you but juls213 isnt an email address :wavey:

pm's sent to everyone else!

[aNskY]

more pics

http://i4.photobucket.com/albums/y126/ansky3351/kybs.jpg

http://i4.photobucket.com/albums/y126/ansky3351/decklid.jpg

[BoostinGST]

if you still have the 5sp. tranny harness let me know i need it asap... also i need the ecu relay with the plug

[aNskY]

i have an ecu relay no tranny harness anymore sorry

also kyb's are sold, still have the sportlines!

[aNskY]

open diff is off the car and ready to ship. in pumpkin with 6 bolt shafts $125 SHIPPED $50 picked up!

http://i4.photobucket.com/albums/y126/ansky3351/diff.jpg

still have this ka clutch great condition! cheap $50

http://i4.photobucket.com/albums/y126/ansky3351/clutch.jpg

all parts are off the car and ready to ship!

http://i4.photobucket.com/albums/y126/ansky3351/shell.jpg

[ZenkiSilvia]

Still have the Tranny? I need it shipped to 94404 if you do thanks!!

[aNskY]

not shipping trannies unless you have a frieght company come with a bill of lading.

[aNskY]

diff is sold!

[aNskY]

getting ready to throw a lot of stuff in the dumpster...

[IMPerfection]

PM me what you're dumpstering, maybe I could take it off your hands for enough over the cost of shipping to make it worth your while to pack it up and ship it to me. I wish you know what kind of clutch that was for the KA, but for under $50 shipped it almost doesn't matter as long as it's got plenty of friction material left. What else do you have left? Any chance of you having a working windshield washer system (lines/sprayers/tank+pump?) left? Mine has toxic mold growing in it. Or, any stock suspension arms besides tension rods that have new bushings in them? There's a lot of stuff I'm looking for passively, just have trouble actually remembering when it comes down to posting requests for it.

[speedstar01]

PMd you, since i live in NY id like to possibly pick up some stuff :)

[aNskY]

PM me what you're dumpstering, maybe I could take it off your hands for enough over the cost of shipping to make it worth your while to pack it up and ship it to me. I wish you know what kind of clutch that was for the KA, but for under $50 shipped it almost doesn't matter as long as it's got plenty of friction material left. What else do you have left? Any chance of you having a working windshield washer system (lines/sprayers/tank+pump?) left? Mine has toxic mold growing in it. Or, any stock suspension arms besides tension rods that have new bushings in them? There's a lot of stuff I'm looking for passively, just have trouble actually remembering when it comes down to posting requests for it.

i threw out what i had left of the washer system... threw out the tank long ago for my first fmic

i have all of the suspension arms except front lower control arms. none have new bushings.

i can pull the bushings out of my subframe... z32 energy complete rear subframe bushings (8 pieces, polyurethane) used since march maybe 2k miles on them

http://s4.photobucket.com/albums/y126/ansky3351/th_03-11-06_1309.jpg

$50 shipped

ill let the clutch go for 40 shipped!

[IMPerfection]

i threw out what i had left of the washer system... threw out the tank long ago for my first fmic

i have all of the suspension arms except front lower control arms. none have new bushings.

i can pull the bushings out of my subframe... z32 energy complete rear subframe bushings (8 pieces, polyurethane) used since march maybe 2k miles on them

http://s4.photobucket.com/albums/y126/ansky3351/th_03-11-06_1309.jpg

$50 shipped

ill let the clutch go for 40 shipped!
I've got SPL aluminum subframe collars. I've got to work over my rear suspension tomorrow (hopefully) or Friday and figure out what's causing the weird camber and off handling, and if you still have the clutch then, I'll buy it and any suspension arms I need at that point; I just haven't had time to look yet.

[anhion]

still got the corner lights
[email protected]
socal 92843

[NISMO500]

looking for wiring harness that is for the lights in the front and goes to the fuse box ?

thanks