FS: '95 240sx w/ RB20DET **NEED TO SELL NOW!!**

[RBWannaB]

The car is a white 5spd 1995 240sx RB20DET w/ about 120k on the body. The RB20 has the usual 35-40k on it. The motor was imported from a dealer in Canada, and idles and runs strong.

I was building this car to push 350-400hp, so there are quite a few aftermarket parts. Here is list of what I am including with the car:

RB20DET
Cheapo 17x7 white wheels (not in good condition...good for track use only)
BRAND NEW set of SportMax 006 17x9 wheels (still in boxes...no tires)
Godspeed FMIC w/ 3" Core
HKS SSQV style BOV
Two 12" Electric Fans
Custom MA Motorsports 3" Downpipe w/ Testpipe
HKS 3" Catback Exhaust
Carbon Fiber Spoiler (can't remember make but it was a $300 wing)
Carbon Fiber side mirrors
BRAND NEW T3/T4 turbo (was going to upgrade turbo w/ install)
50ft of header wrap
Box of 10 NGK Spark Plugs
JGY 10lb Flywheel
JGY 6-Puck Clutch (good to 550hp)
Tach Signal Converter (allows me to use stock guage cluster and tach)
AGX Shocks/Struts
Tein Springs
Sony Xplod speakers all the way around (came with car when I baught it)


I am sure there is more buts it's late and I can't think right now...

Now for the issues with the car...There are some dents just behind the passenger door. The front bumper is also a bit scratched from when the motor was installed and could use a re-painting. The interior trim around the shifter and radio could use replacing. The car also needs an upper intercooler pipe (to go from i/c to throttle body), and an RB20 Maf...I have an RB25 Maf but I am not 100% sure if that will work.

I would like to sell the car as-is, just because I don't have much time left to tinker with it. It is driveable now, it only needs tires for the new wheels and an RB20 Maf. Due to the labor already put into the car, as well as the huge amount of aftermarket parts, I would like to get around $8500 for everything. However I am 100% open to all offers.

PM me or email me at: [email protected] for more info. The car is located in Ellicott City MD.

I will take pictures this weekend and post them online. Anyone seriously intersted can give me a call at: 443-285-9981

I need this car sold NOW! It has lasted waaay too long and is getting annoying. I am only asking $5000 for the car. Come get it. If I do not sell it within the next few days I will have to part it out.

[Azzazzyn]

man, i wish I had that, I only have 3100 from my car being smashed by a sliverado, otherwise I'd love to buy your car

[KoukiJAR]

inteterested when u get pics up...ive seen this car on autotrader for a while now and ive been meaning to check it out

[RBWannaB]

pics sent...

[MOUNTAINGARAGE]

PLZ SEND PICS. [email protected]

[RBWannaB]

pm sent.......

[underwhere skidmarks]

post pictures its a rule bro.

[RBWannaB]

I would post pics but they are too big

[ramblux]

post pictures its a rule bro.

You like saying that, eh?

[patrick10]

just open the pics in mspaint and hit image the stretch skew, then type in like 50 in the first 2 boxes... its cake


btw im interested but you say its driveable, but then it needs a mafs and coldpipe?????

[RBWannaB]

The BOV pipe needs to be welded and it needs a maf yes. It starts a runs fine, and can technically be driven, but I would rather see it towed than someone try to drive it home.

[RBWannaB]

I am willing to negotiate further on the price if the car can be sold this weekend!

[patrick10]

just email me pics and ill post them

so you have a cold pipe, it just needs to be welded up? is it aluminum?

[RBWannaB]

All pics are here at this ebay auction:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110017495469

Yes the cold pipe needs to be welded together (2 halves to it) and the BOV flange welded to it as well. Yes the pipe is aluminum and I have all of it.

[Edgar]

thats a pretty good price imo

why dont you do all the fluid flush

have you ever drove it

[RBWannaB]

The only reason I havn't finished the fluid flush is because I never drove the car. I would flush all the fluids after about 500miles or so of driving the car.