s14 zenki fog light rewiring help

[kenshinS14sks]

I found this How To: Zenki / S14 Non-SE Fog Light Wiring (http://www.zilvia.net/f/showthread.php?t=77698&highlight=zenki+fog) but I remember there being another one.

this one seems to be a bit unclear on where the extra wire goes to and what exactly you do with the 2 pin plug on the inside of the car. can anyone clear up this thread or refer me to another please? thanks for your guys' help in advance.

[projectRDM]

Are you joking? That's the most detailed writeup ever. You don't even touch the switch wiring, just clip and relocate the red/blue wire from the relay. It cannot be any easier.

[Slidin240Wayz]

this one seems to be a bit unclear on where the extra wire goes to and what exactly you do with the 2 pin plug on the inside of the car. can anyone clear up this thread or refer me to another please? thanks for your guys' help in advance.

Haha, wow. That shit is pretty precise, but I will clarify for you. The extra wire connects the lowbeam and the relay. Next, you solder the 2-pin plug together and just tape it up. Both of these details are in the thread you posted. Cheers.

Carlos

[dct223]

what are you trying to do?

if your trying to put SE foglights onto a non SE s14 its simple, everything is plug and play, the foglight harness is already on the car, all you need to do is plug everythig up, also get a SE headlight switch which has the foglight switch on it, plug in the blue relay in the fusebox and bam your done... no cutting, no modification, nothing.. PLUG AND PLAY


if your trying to do a foglight mod so you can have your foglights on with your parking lights on... all you have to do is cut the blue/red wire that leads to the foglight relay, and find an alt source of power to go to the relay, such as a side marker so the relay will trip from that instead of your headlights.

(the link you provided, if you read he stated to wire foglights to turn on with parking lights)