PDA

View Full Version : Quick and simple


Shawn_of_the_Dead
07-28-2006, 12:56 PM
This is a quick question that some might think is dumb...if so, flame me I dont care. I searched, and posted in the thread I found, but no one responded. So here one more time is my question.

I need to put my welded diff back together and was wondering if you need to pack the bearings or just use gear oil only. I was positive you would only use gear oil, but then my neighbor said something about having to pack them first and then put them in packed + gear oil. Now I am second guessing myself, and am unable to find a solid answer. What can happen if you pack bearings that do not need it? .....nothing bad right? Thanks guys.

Shawn_of_the_Dead
07-29-2006, 03:17 PM
come on....some one has to know.

RedtopTech
07-29-2006, 04:19 PM
you do not pack diff bearings

Shawn_of_the_Dead
07-29-2006, 08:56 PM
Thank you very much. I was hoping someone would chime in. I wanna throw it all back in tomorrow.

SochBAT
07-29-2006, 09:06 PM
measure backlashing or it'll f*ck up.

Use BrakeQuiet.

Shawn_of_the_Dead
07-29-2006, 10:46 PM
alright I will have to check into that, your the first to mention it. I just thought I would be able to reverse the process and install the way removed with all the shims and everything.

SochBAT
07-29-2006, 11:41 PM
if installed with too much/little backlash, you can easily mash up the ringgear with the pinion(?) [the one that is actually connected to the driveshaft]

And make your diff EsPLODE!

Shawn_of_the_Dead
07-30-2006, 01:16 AM
dont want no esploding, thats for sure!