Huge S13 Part Out - Turbo- SR20DET Motors...

[Boney]

PICS ON PAGE 2

All parts w/o shipping included.

S13 SR20 transmission w/ all sensors (speed, neutral, reverse lights, all gears shift like butter) – $275
Nissan 550cc injectors (SR or KA, 500 miles on them) installed in Intake manifold and Throttle Body w/ TPS. I do not wish to take this apart so I am selling all as one. This is an awesome deal. - $350
Stock SR flywheel just resurfaced - $30
S13 front stainless brake lines (brand new uninstalled) - $40
stock sr20 turbo manifold + outlet pipe - $40
SR Crank Pulley - $20
AEM Dryflow air filter 3" (brand new) - $40
Number One S13 Strut Bar - $30
SR Spark Plug Cover - $25
SR Clutch Cover bolts - $25
SR Transmission bolts - $25
SR passenger side water neck - $40
SR Alternator brackets & bolts - $25
SR S13 Intake Manifold spacer gasket - $25
180sx rear center taillight panel – $40

SR Ignitor Chip - SOLD
Ichiba SS manifold SR (500 miles on it) – SOLD
Power Steering bracket & bolts SR20DET - SOLD
Motor Mounts in great shape - SOLD
Polished intake pipe w/ cone filter (T25) - SOLD
SR drivers side Water neck - SOLD
SR 5 layer S15 exhaust manifold gasket - SOLD
T25 Inlet Elbow (intake) - SOLD
T25 Outlet Elbow (intercooler) - SOLD
Bosch S13/S14 Fat O2 sensor (basically new) - SOLD
Redtop SR20DET engine - bad piston ring in #2 - has good top end for sure, arp head studs, metal head gasket, brand new oil pump & front cover, brand new water pump & oil pan - I paid $1100 for this block from heavy throttle, $250 for the oil pump, drove it for 2000 miles and blew a piston ring somehow... - SOLD
FP Big 28 Turbo - SOLD
SR Flywheel bolts - SOLD
Koyo aluminum race radiator (500 miles on it)– SOLD
Power Steering Pump S13- SOLD
HKS adjustbale wastegate actuator - SOLD
Ichiba SS outlet pipe (500 miles on it) – SOLD
Taka turbo lines T25 - SOLD
Samco blue radiator hoses (SR) - SOLD
SR Starter - SOLD
Z32 MAF Sensor w/ pigtail already wired for SR - SOLD
Redtop #62 ECU - SOLD
Greddy 3" downpipe - SOLD
Apexi N1 cat-back 3" exhaust – SOLD
3" test pipe - SOLD
HPI Intercooler kit w/blue couplers – SOLD
Polished hot pipe w/ HKS SSQ bov – SOLD
Cam Angle Sensor in awesome shape – SOLD
SR Coilpacks - SOLD
SR20 Water pump new – SOLD
SR20 Water pump used – SOLD
GReddy oil catch can - SOLD
Exedy Stage 2 cerametallic clutch (brand new) – SOLD
Imori Turbo gauge (2" black face, with multi-color controller, paid $120) – SOLD
Dual gauge Pod 60mm black - SOLD
Black SAFC-II (basically brand new)– SOLD
Greddy water pump & power steering pulleys – SOLD
New 80 amp Alternator w/ sr pulley (fits sr or ka [needs ka pulley for ka motor]) – SOLD
HKS rocker arm stopper kit – SOLD
180sx front split lenses - SOLD
stock new radiator w/ hoses (KA or SR) - SOLD
S13 SR20DET engine harness converted - SOLD

[ohnobigtdawg]

if you have the tps(throttle position sensor) ill take that off you hands, $45 shipped to 90630? how does that sound? let me know! thanks!

[sepulchral]

youve been pmed on the hks actuatoor, hks bov and pipe

[Boney]

arnetts you have exceeded PM limit..

Do you still have the sr20 tranny if so I would like to pick it up from you. Please let me know if it is still available. Thanks.

James

yes it is, will it be a pick-up? I would prefer not to ship it.

[whooha1217]

Greddy water pump & power steering pulleys ----- does this include alternator pulley?
Polished intake pipe w/ cone filter (T25) - what kind of filter? and who made this pipe?

[Wes_s13]

does the engine come with the starter , alternater, pulleys, stock turbo, etc? im located in MA also..PM your address so i can mapquest it and i can come see this stuff..very interested. Thanks

[twofocused]

180SX tailight panel...

The flat-sided unit that says "180sx"

OR

The JDM one that allows use of the kouki tails?

[Boney]

Greddy water pump & power steering pulleys ----- does this include alternator pulley?
Polished intake pipe w/ cone filter (T25) - what kind of filter? and who made this pipe?

No alt pulley, it got destroyed, dont wanna talk about it lol. The intake pipe was off a group buy on here and has 1 nipple for a catch can. The filter is an autozone power adder, cheapie. I also have aem dryflo filters in stock if your interested.

does the engine come with the starter , alternater, pulleys, stock turbo, etc? im located in MA also..PM your address so i can mapquest it and i can come see this stuff..very interested. Thanks

The starter wasnt planned on being included but we can work it out.. i have the starter, brand new alternator with sr pulley, greddy pulleys for water pump and ps, big 28 turbo which bolts on like stock, ichiba ss manifold and outlet pipe... PM'd address.

180SX tailight panel...

The flat-sided unit that says "180sx"

OR

The JDM one that allows use of the kouki tails?

Flat sided for stock tails.

[vbl]

pm your phone #, we will discuss about some parts i want to buy.

[Rkesh88]

the intake is it for the SR or KA, and if KA sohc or dohc

[Boney]

the intake is it for the SR or KA, and if KA sohc or dohc

Its a polished aluminum intake pipe with blue couplers for an S13 SR with a T25

[94gto]

Do you have pics of the intercooler kit?

[Boney]

bump! new stuff added. i might be forgetting some things.. i basically have a full sr setup, inquire about something you think i may have not listed.

[turbotractor97]

interested in power steering pump and bracket
please email me at [email protected]

[Boney]

Guys, no low-balling.. i'm already losing thousands. These prices are dead cheap.

[Boney]

http://memimage.cardomain.net/member_images/9/web/2217000-2217999/2217794_122_full.jpg

http://memimage.cardomain.net/member_images/9/web/2217000-2217999/2217794_123_full.jpg

[driftking777]

you got PM..

[Secretsquirrel]

im interested in the taka lines...i sent an email to [email protected] so check there!

thanks


SS

[Boney]

sepulcar - your pm's are filled up.. - 75 shipped
paypal: [email protected]

[sliEighty]

i would love to take the turbo lines off your hands... LMK price shipped to 17033

[slider2828]

PM'ed you for the clutch, paypal ready

[Boney]

pm's all answered, clutch is sold...

[Boney]

PRICES LOWERED!!

i'm going to list the rest of this stuff on ebay soon.. so if anyone is interested in anything let me know.

[Adam496]

I want the Front Mount kit. Do you have any pictures and what is shipping to 07480. Also does the intake pipe have a bung for recirculation and stock catch can?

[sidedrifts13]

how can i contact you i need the power steering intercooler radiator and throttle body money in hand please let me know also where are you located also oil catch tank and ontercooler pipes thank you do u still have the wire harness

[r33civic19]

ill put money in pay pal on fri for koyo rad and fan

[Boney]

ill put money in pay pal on fri for koyo rad and fan

You can pay w/o anything in your PP account if you have a cc or bank account attached, $260 shipped for that.

I want the Front Mount kit. Do you have any pictures and what is shipping to 07480. Also does the intake pipe have a bung for recirculation and stock catch can?

FMIC is pending payment payment, ill let you know if it doesnt go through, the intake has 1 15mm bung for a catch can.

[Boney]

BUMP, lots of good stuff here..

[In The Works]

interested in the catch can..Shipping to 23464?

[Boney]

interested in the catch can..Shipping to 23464?

$78 shipped to you.

[In The Works]

can i get pics sent to [email protected] .... If its in good shape I will get your paypal addy and send the money today or tomm

[punxva]

im interested in the intake pipe, shoot me some pics to [email protected]

[Boney]

i will get some pics later tonight or tomorrow!!!

[In The Works]

Need pics...Have cash ready. Also do you have a set of clutch cover bolts?

[D1champ]

Is that radiator still available? If yes, do you ship to Canada?

[Boney]

Is that radiator still available? If yes, do you ship to Canada?

the stock one or koyo? yes i will ship to canada.

[Boney]

new stuff added to the list on 1st post, and a ton of pics comin at ya.

http://i55.photobucket.com/albums/g138/RightCoastImports/transbolts.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/trans.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/starter.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/split.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/samcos.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/ranparts.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/ps.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/mounts.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/mani.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/turbo.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/koyo.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/intake.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/im.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/flywheel.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/filter1.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/filter.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/cover.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/coils.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/bar.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/alt.jpg

[Boney]

http://i55.photobucket.com/albums/g138/RightCoastImports/waterneck1.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/waterneck.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/turbo2.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/turbo1.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/turbo-1.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/o2.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/ignitor.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/gaskets.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/altbracket.jpg

[Boney]

http://i55.photobucket.com/albums/g138/RightCoastImports/flybolts.jpg
http://i55.photobucket.com/albums/g138/RightCoastImports/brakelines.jpg

[driftenthusiast]

Will you ship tranny to 22124, Va?

[Id RaThEr DrIfT]

SR alternator shipped to cali 91766 lmk asap cash in hand and whats the condition...

[Boney]

bump, prices dropped, new stuff added.

[Boney]

Will you ship tranny to 22124, Va?

Yes, dont know how much it will cost, prob at least $100



Alternator is sold.

[Josh K.]

emailed about the turbo.

I'll give you $700 shipped without manifold, with 02 sensor and FedEx 2day ($58) shipped 8-16-06. zip 98383

I'm assuming the wastegate actuator is included but not show in the last pics.

Josh
360-509-8481

please reply here or cell as I don't have access to my email account during daytime.

[Josh K.]

I'm ready to paypal you the money.

[HalveBlue]

I'm looking for the bolts that connect transmission cross member to the underside of the car (14mm, stubby looking) and the nuts and bolts on the coupling that connects the propeller shaft to the transmission (17mm/19mm, longer bolts).

How much shipped to 80906?

Also, if the Redtop driver-side Waterneck fits on a Blacktop engine, I'll take that off your hands as well.

Let me know, either here or via PM.

Thanks.

[Boney]

Josh i'll do the 700 shipped with the 02.. i'll ship it priority mail 2-3 day.

WGA is not included, i'd recommend getting an hks, even with a boost controller this is a necessity for smoothness.

paypal: [email protected]


HalveBlue: I dont have those bolts, but the water neck will fit on the blacktop. $48 shipped

[Boney]

BUMP! prices dropped, parts added. clearance!!!

[z32gizzle]

does the ichiba SS manifold come with gaskets for it and the turbo? If so Ill take it shipped to 78216

[Boney]

does the ichiba SS manifold come with gaskets for it and the turbo? If so Ill take it shipped to 78216

Yes for $180 shipped i'll give you the 5 layer block to manifold gasket and a basically brand new turbo to manifold gasket.

[Inlandsilvia]

yo, any updates on my parts being shipped???

[Boney]

all parts shipped..

[WILDACEX187]

i'll give u 250 if u take out the injectors :bow:

[Boney]

i'll give u 250 if u take out the injectors :bow:

its tough to get them out w/o ruining them..

[WILDACEX187]

i dont need all that other stuff and i also dont wanna pay for the extra shipping and for the manifold. im pretty sure u can take the fuel rail with injectors off from the manifold

[Boney]

i dont need all that other stuff and i also dont wanna pay for the extra shipping and for the manifold. im pretty sure u can take the fuel rail with injectors off from the manifold

sure i'll do that, $265 shipped.