Parting Out Fully Built Sr

[S14MARKSR]

well im moving on and selling out the SR stuff, i need to make a change and all of my SR stuff is now up for sale...engine is complete but i am going to tear down and sell off peice by piece and they are as follows....

Block bored .020 over....400.00 complete with lower oil pan (upper pan) (SOLD)
greddy oil pan...150.00 (SOLD)
stock crankshaft....200.00
Cp pistons....020 over 300.00 (SOLD)
Crower rods.... 400.00
built and ported head with bronze guides (SOLD)
and super tech dual valve springs 1000.00
greddy intake manifold.....350.00 comes with 240 T/B (SOLD)
turbo-fab turbo manifold (log).....200.00
tranny....200.00
Spec D clutch kit with flywheel....400.00 8k miles
brand new wiring harness modded to fit S14 chassis....250.00 (SOLD)
tomei metal head gasket (super grommet) 200.00 (SOLD)
arp head studs....50.00 (SOLD)
ARP main studs...50.00 (SOLD)
S13 vlave cover Powder coated gunmetal 100.00 (SOLD)
coilpacks 100.00 for the set
ignitor 125.00
Enthalpy tuend ECU rom tuned for 850cc injectors and Z32 MAF with cam upgrade and intake manifold upgrade and T3/T4 upgrade 400.00 (SOLD)

your choice to either respond here or email at [email protected]

[bxsvx]

hows your tps? if its good i would like to buy it. my car stutters at low rpm and flies after around 4, big time hesitation.

[S14MARKSR]

sorry but the TPS is going stay attached to the throttle body, i dont want to take it off ..sorry man

[S14MARKSR]

i also forgot to mention that i have not one but two Z32 300zx trannys for sale..price for them is 300.00 each

[Shadytrixta1]

How many miles on this stuff?interested in rods and pistons.

[91gst]

can you send me pics of the greddy oil pan, clutch and flywheel? [email protected]

[S14MARKSR]

How many miles on this stuff?interested in rods and pistons.
miles on internals is less than 10k miles

[S14MARKSR]

can you send me pics of the greddy oil pan, clutch and flywheel? [email protected]
yes i will be happy to send pics of the parts as soon as the engien is removed from the car ...which will be done on monday or tuesday of this coming week

[Duosx]

very interested in sr20det valve cover and greddy manifold !!! would like pics asap to [email protected] also wondering if u have an performance lsd for sale ?? will paypal right away if they look good !

[misfitsfreak81]

could you send me pics of the greddy oilpan and also the spec D clutch kit. thanks

mike
[email protected]

[TheAznOne]

hey i'm interested in the ARP head and Main studs, Greddy intake manifold. I was wondering if you can send me some pics and the greddy intake manifold???
Kris [email protected]

[TheWolf]

super tech dual valve springs 100.00
arp head studs....50.00
ARP main studs...50.00

Will Take Have cash in hand. Where are you in florida. I'm in jacksonville.

also give me some info on the tranny. Might take that as well.

[S14MARKSR]

could you send me pics of the greddy oilpan and also the spec D clutch kit. thanks

mike
[email protected]
i will gladly take some pics of everythign once i have removed the engine from the car..

[S14MARKSR]

hey i'm interested in the ARP head and Main studs, Greddy intake manifold. I was wondering if you can send me some pics and the greddy intake manifold???
Kris [email protected]
thisi s what the engine looks like in the carhttp://www.nicoclub.com/2005_convention_photos/NOPI_Nationals/Maverick7687/100_0486.JPG

[S14MARKSR]

super tech dual valve springs 100.00
arp head studs....50.00
ARP main studs...50.00

Will Take Have cash in hand. Where are you in florida. I'm in jacksonville.

also give me some info on the tranny. Might take that as well.

thanks for the interest in these parts but as for the valve springs im not parting them out...head is a complete unit and the springs are easily worth more than 100.00. the studs are already spoken for.

[Wezz]

Mark,

I'm interested in the Sr harness. Is that a S13 motor in a s14 harness or a S14 to S14 SR harness?

thanks
Paul

[S14MARKSR]

Mark,

I'm interested in the Sr harness. Is that a S13 motor in a s14 harness or a S14 to S14 SR harness?

thanks
Paul
hey man its a S13 harness for a S14 chassis

[Wezz]

Mark I sent you a PM on the harness...

thanks
Paul

[S14MARKSR]

thanks for the replies everyone...time for a bump

[ranger2339]

Id like the head, pistons, rods and ecu???

ill pm ya...

Josh

[Syncmaster]

Hi,

I'm very interessed by your intake manifold greddy.. send me a picture.. [email protected]

Thanks

[S14MARKSR]

Hi,

I'm very interessed by your intake manifold greddy.. send me a picture.. [email protected]

Thanks
http://www.nicoclub.com/2005_convention_photos/NOPI_Nationals/Maverick7687/100_0486.JPGthis is my engine in complete form..im taking it apart next week.

[ranger2339]

How much for the whole engine??

Im looking for a built engine?? Minus tranny...

It would be nice to have the whole thing...

Josh

[S14MARKSR]

ok time for an update....parts that are spoken for are as follows..

stud kit for head and block
SR block
CP pistons
Spec D clutch kit
SR head
Valve cover
Wiring harness
Greddy intake manifold

parts still up for grabs

cranskhaft
crower rods
greddy oil pan
turbo manifold
ECU
tomei metal head gasket
coil packs
ignitor
tranny


just so everyone knows these aprts are spoken for not paid for..untill the money is in my paypal or my hands they are not sold....the only reason i have set these parts aside is they have promised the money is there for me when the parts are ready to ship..

[S14MARKSR]

ok i just wanted to let the people know that the engine is finally out...i am hoping to hae it all disassembled tommorrow after i get off of work.for those of you who i have you telephone numbers i will be in touch soon...just to let the others know i still have parts for sale so i will be updating the list very shortly and adding more stuff too so please keep an eye on this thread.

thanks

Mark

[S14MARKSR]

another update..engine is notw apart and ready to start being shipped out..for those of you who have already called me on the parts you are purshasing from me please give me a call back if i have not heard from you today..i cannot remember the person who was buying the block, pistons, clutch kit from me but i did have you number in my phone but it has been passed up since i have gotten soo many calls....please please give me call tonight i know you said you live in ocala and would be making the drive down here so i need to hear from you ASAP. as for the rest of you parts will be shipping very soon.

thanks Mark

( I HAVE MORE PARTS WILL BE POSTING THEM UP SOON)

[TAMTANIUM]

Do you still have the Greddy oil pan? or stock oil pan? I'm also looking for the upper oil pan for red top SR. Let me know..

Thanks,

Tam

[S14MARKSR]

Do you still have the Greddy oil pan? or stock oil pan? I'm also looking for the upper oil pan for red top SR. Let me know..

Thanks,

Tami have had soo many people wanting the greddy oil pan and it pains me to say that it has been spoken for already..and the stock upper pan i am selling with the block

[Duosx]

how much do u want for the intake mani then

[S14MARKSR]

how much do u want for the intake mani then
intake manifold is sold...sorry i will be updating the list very shortly

[S14MARKSR]

TTT the list has been updated...dont forget to check out my other post

[chargespeed s14]

Still have the Crankshaft? LMK... hit me up at [email protected]