Stainless steel clutch lines

[a33 vq30dek]

Hey guys,

I know some people have the stainless clutch line that just replaces the clutch line and not the hardlines. Does anyone make clutch lines that go from the slave cylinder straight to the clutch master cylinder?

-Brian

[ride 4 lame]

http://www.takamotorsports.com/products.htm
mc to sc

[s13silvia03]

I believe the SPL parts line bypasses the damper loop as well

[OptionZero]

I have both SS lines (long and short) from taka.

before the SS lines, i was using the ghetto stock used rubber lines, and the clutch release point and pressure would get really spongy and awkward in the hot weather; with SS lines there is never change in clutch feel

[AznXstazy]

GB!!!!!!!!

message length...

[a33 vq30dek]

well i could get some made for $30 dollars shipped.. would you guys be interested?

[240trainee]

Would they be quality parts? teflon coated, anything like that? I would definatly be interested, I have a car in need of 5-speed swap parts.

[1121S13]

well i could get some made for $30 dollars shipped.. would you guys be interested?
show me the unit first.

[kouki_s14]

needs to be teflon coated and i would definitely need some pictures first

[a33 vq30dek]

http://forums.maxima.org/showthread.php?t=464683


here some pictures off of my car. I know all the fittings are the same for the maxima and 240sx... i just need to find the length of the 240.

if there is someone in the bayarea that wants to test fit it.. i'll give them a line for free.

[kouki_s14]

so no teflon wrap?

[a33 vq30dek]

no

there should be no need for the teflon wrap

[kouki_s14]

if i go and measure the lines for you right now can i get a free one??? haha it's worth a try

[AznXstazy]

if i go and measure the lines for you right now can i get a free one??? haha it's worth a try

lol, measure mine bofore urs. i probaly would do this, depending on quality etc. interested though.

[kingsol]

Brian, you're on here?! Give me free line!

You know Jon already has it on his car.

[a33 vq30dek]

sup donovan...

you want to help me out here... haha

[hayai_240]

I know that heavy throttle already sells a stainless steel clutch line like this on their website. I cant put the link in here but its located inside their AT to MT swap link. Its more expensive than the one a33 vq30dek is selling. If your really gonna produce this, then you can count me in. Do you plan on making a cable that goes directly from the MC to the SC? or a cable from the MC to the bracket just before the SC? Just as a suggestion, you may want to offer 2 kits cause im sure alot of people out there already have a SS clutch line that they used to replace the clutch dampener loop.

[a33 vq30dek]

this is going to be for the MC to the SC directly... i just need some help from kingsol! DONOVAN!

[kingsol]

Sup man, are you going through Matt for this? I want to check it out, and you need to talk to the mods for a group buy.

[a33 vq30dek]

no i'm not going through matt, i just need to measure the lines.

I have all the fittings ready.. just need to get the lines measure.

i need this stuff figured out before i talk to the mods about a group buy. hehe

[[email protected]]

I use the NISMO one, cant complain...

bypasses the damper as well...

http://img.photobucket.com/albums/v461/PerformanceNISMO/eBay/240ssch.jpg

[s13silvia03]

There's been a groub buy for SS clutchlines for like $22 on here for awhile now, I purchased one awhile ago.

[Slidin240Wayz]

MC to SC FTW. I am in!

[crazyikimasho]

no

there should be no need for the teflon wrap

The teflon wrap is used to protect the outside of the line from dirt, grit, etc. and abnormal wear. Most good companies have teflon wrap (Earl's, Nismo, etc.). I personally would recommend buying lines with teflon wrap whether it be clutch lines or brake lines.

[a33 vq30dek]

There's been a groub buy for SS clutchlines for like $22 on here for awhile now, I purchased one awhile ago.


but that doesn't go from the MC to the SC

[MOUNTAINGARAGE]

Import tuners need to be more resourceful. Search, Read, Cross reference, etc.

Your local Hydraulic supply will make you a custom line in less than 10 minutes for ~15.00

just make sure you know what you are talking about when you go in. They will not make d.o.t. approved lines on the spot.

tell them "I need a 14" SS braided line with 10mm female fittings on both ends." and he should answer back, ok no problem that will be 8.00/ft and 4.50 -per end. " ....this is an example, not what you should order.

Look in the phone book under tractors or autoparts for hydraulic supply, call them and ask if they do metric lines. Just do not tell them it is for your street car!!!!! if they do ask, tell them it is for a tractor or off road vehicle.

Teflon wrap - you can always use heat shrink tubing if you think the clutch line will rub on the chassis or something. $1-5.00

:wavey:

[slider2828]

Yo a33, ima down for a test... I am in the Bay Area too.... PM me your info and I can hook up with you... Lemme know

[AznXstazy]

but that doesn't go from the MC to the SC

ya, is this goin to go for 30 shipped =) if it is, great deal.

[s13silvia03]

but that doesn't go from the MC to the SC
Yeah, but all you have to do is bend the hardline a little bit so that the line reaches the slave...not that difficult and takes like 5 mins...

[a33 vq30dek]

then go ahead and do it your way.

[theronin]

we will, and for cheaper, thanks.

[trsilvias13]

I am interested and I am in san Francisco. I want free lines. I will drive to you as well. Let me know. [email protected]