codyace
07-19-2006, 09:05 PM
Here are some Stock SR Turbo and Engine parts for sale. There are an unknown amount of miles on the SR stuff, as it came with my engine. Upon engine teardown, I would assume that the engine had a low amount on it (50,000 and under)
If you are looking for more pictures (especially of the turbo components) Please visit my Photo Gallery: http://www.e-rak.com/cody/gallery/album253. Anything listed will also have it's full rez full size photo in the gallery as well :)
Stock SR Turbo Setup
Includes: Stock T25, OEM Manifold, OEM J Pipe, OEM Turbo Heatshield, OEM Turbo Lines (except drain tube and flange), as well as Compressor intake and output elbows.
http://www.e-rak.com/cody/albums/album253/IMG_1402.sized.jpg
The turbocharger, has no visual damage on the fins or in the housings. It also has a very minimal (stock turbo) amount of shaft play, but nothign 'in-out'. The only thing is that the turbo spins, but not exactly freely...not because of wheel or shaft problems, but because I'm sure there is built up oil in the CHRA that is just gooked up from sitting for the past few years in Japan. Because of this, my integrity won't let me promise that it will be fine, however it could very well be ok with some new oil and heat.
I'd love to sell it all complete for 200 dollars...however I may split it eventually. Both the manifold and j pipe have been glassbead as well.
Stock SR MAF
Can't vouch for working status, however everything appears A-OK 25 dollars
http://www.e-rak.com/cody/albums/album253/IMG_1392.sized.jpg
Stock SR Crank Pulley
15 dollars
http://www.e-rak.com/cody/albums/album253/IMG_1391.sized.jpg
Stock SR (or KA) Manual Transmission Crossmember
I got an extra with my Swap, so here's yours! 25 dollars
http://www.e-rak.com/cody/albums/album253/IMG_1390.sized.jpg
All prices are negotiable, and local pickup is an option for those who want to do that! I live in Stroudsburg PA (Pocono Mountains)...Right off of Route 80 where it crosses into NJ. I'm an hour 1/2 from the NY tunnles and the same distance from Philly!
If you are looking for more pictures (especially of the turbo components) Please visit my Photo Gallery: http://www.e-rak.com/cody/gallery/album253. Anything listed will also have it's full rez full size photo in the gallery as well :)
Stock SR Turbo Setup
Includes: Stock T25, OEM Manifold, OEM J Pipe, OEM Turbo Heatshield, OEM Turbo Lines (except drain tube and flange), as well as Compressor intake and output elbows.
http://www.e-rak.com/cody/albums/album253/IMG_1402.sized.jpg
The turbocharger, has no visual damage on the fins or in the housings. It also has a very minimal (stock turbo) amount of shaft play, but nothign 'in-out'. The only thing is that the turbo spins, but not exactly freely...not because of wheel or shaft problems, but because I'm sure there is built up oil in the CHRA that is just gooked up from sitting for the past few years in Japan. Because of this, my integrity won't let me promise that it will be fine, however it could very well be ok with some new oil and heat.
I'd love to sell it all complete for 200 dollars...however I may split it eventually. Both the manifold and j pipe have been glassbead as well.
Stock SR MAF
Can't vouch for working status, however everything appears A-OK 25 dollars
http://www.e-rak.com/cody/albums/album253/IMG_1392.sized.jpg
Stock SR Crank Pulley
15 dollars
http://www.e-rak.com/cody/albums/album253/IMG_1391.sized.jpg
Stock SR (or KA) Manual Transmission Crossmember
I got an extra with my Swap, so here's yours! 25 dollars
http://www.e-rak.com/cody/albums/album253/IMG_1390.sized.jpg
All prices are negotiable, and local pickup is an option for those who want to do that! I live in Stroudsburg PA (Pocono Mountains)...Right off of Route 80 where it crosses into NJ. I'm an hour 1/2 from the NY tunnles and the same distance from Philly!