brage
07-19-2006, 03:08 PM
Well guys... its been fun, but my 240 has been basically sitting in the garage for the past year. I love the car, but I just don't use it enough to justify keeping it.
PM me if you're interested. ACCEPTING BEST OFFERS... Not accepting any trades and please don't low ball me! I'll get more recent pics up asap..
http://www.turbo240sx.com/[email protected]
1996 block w/ '97 head. ~36 k on the head, ~56k on the block before it was built. Rebuilt engine has ~6k miles on it.
Engine:
F-Max stg II setup w/ JWT ECU on a fully built bottom end.
F-Max t3/t04 turbo setup
-everything is HPC coated inside and out including intercooler piping
JWT fuel rail
SS fuel supply line
Walbro 255lph HP fuel pump
Z32 fuel filter
MSD 50lb injectors (I have 72lb injectors for it as well)
Cobra MAFS
JWT 8.5:1/Cobra/50lb injector ECU Program (needs a hardware mod if you want to run the 72lb injectors)
3" SS SR20 DP, 3" catco high-flow CAT
Magnecore plug wires
NGK PFR6G-11 platinum plugs
Ross Pistons (.020 over)
Total Seal Rings
Full floating wrist pins
Pauter Rods
Fully balanced rotating assembly
OEM bearings
Apexi N1 exhaust
t3 turbo blanket/heat shield
Transmission/misc drivetrain
5spd w/ ~42k miles on it
B&M short-shifter
Factory VLSD
Cooling:
OEM Water pump
Nismo Thermostat and 1.3 bar rad cap
stock A/C fan
15% coolant + water wetter
Performance Electronics/Gauges:
Greddy Profec B Spec 2 EBC
WBo2.com 2A0 Wideband o2/datalogger
-logs 3 user 0-5v inputs,3 thermocouples, rpm, and LAMBDA (AFR)
-only 1 user input used right now - GM 3 bar MAP (boost)
Autometer EGT/Boost gauges
Interior
Perfect Black Dash / Black Leather Interior (out of a '96 S14 that had 57k mi on it)
Nardi Sport Rally Steering Wheel+NRG quick-release hub
Suspension:
Dupree subframe spacers
Cusco STB
Tein Flex / EDFC
Suspension techniques front/rear sways (not currently installed, missing some mounting hardware)
Wheels/tires:
Fn01R-C's (hyper black)Front 17x8 25mm offset, Rear 17x9 35mm offset
Falken Azenis ST115 All arround
- Front 225/45/17
- Rear 245/40/17
* extra set of 17x8 wheels included as well (Borbet Type E)
Exterior:
Navan front bumper
Navan wing
Navan skirts
Navan rear valences
Recently had the entire car painted by a pro, there are no dings, dents, etc on the entire car
Lighting
GDM glass zenki lights WITH motorized control
E-bay Hella Ballast + Philips Bulb HID setup
Stereo
Kenwood deck
CDT 6" components in the doors
CarPC w/ 7" touch screen (I'll include this if the price is right)
^^-- you can monitor and log the AFR / boost on it w/ the PC :)
PM me if you're interested. ACCEPTING BEST OFFERS... Not accepting any trades and please don't low ball me! I'll get more recent pics up asap..
http://www.turbo240sx.com/[email protected]
1996 block w/ '97 head. ~36 k on the head, ~56k on the block before it was built. Rebuilt engine has ~6k miles on it.
Engine:
F-Max stg II setup w/ JWT ECU on a fully built bottom end.
F-Max t3/t04 turbo setup
-everything is HPC coated inside and out including intercooler piping
JWT fuel rail
SS fuel supply line
Walbro 255lph HP fuel pump
Z32 fuel filter
MSD 50lb injectors (I have 72lb injectors for it as well)
Cobra MAFS
JWT 8.5:1/Cobra/50lb injector ECU Program (needs a hardware mod if you want to run the 72lb injectors)
3" SS SR20 DP, 3" catco high-flow CAT
Magnecore plug wires
NGK PFR6G-11 platinum plugs
Ross Pistons (.020 over)
Total Seal Rings
Full floating wrist pins
Pauter Rods
Fully balanced rotating assembly
OEM bearings
Apexi N1 exhaust
t3 turbo blanket/heat shield
Transmission/misc drivetrain
5spd w/ ~42k miles on it
B&M short-shifter
Factory VLSD
Cooling:
OEM Water pump
Nismo Thermostat and 1.3 bar rad cap
stock A/C fan
15% coolant + water wetter
Performance Electronics/Gauges:
Greddy Profec B Spec 2 EBC
WBo2.com 2A0 Wideband o2/datalogger
-logs 3 user 0-5v inputs,3 thermocouples, rpm, and LAMBDA (AFR)
-only 1 user input used right now - GM 3 bar MAP (boost)
Autometer EGT/Boost gauges
Interior
Perfect Black Dash / Black Leather Interior (out of a '96 S14 that had 57k mi on it)
Nardi Sport Rally Steering Wheel+NRG quick-release hub
Suspension:
Dupree subframe spacers
Cusco STB
Tein Flex / EDFC
Suspension techniques front/rear sways (not currently installed, missing some mounting hardware)
Wheels/tires:
Fn01R-C's (hyper black)Front 17x8 25mm offset, Rear 17x9 35mm offset
Falken Azenis ST115 All arround
- Front 225/45/17
- Rear 245/40/17
* extra set of 17x8 wheels included as well (Borbet Type E)
Exterior:
Navan front bumper
Navan wing
Navan skirts
Navan rear valences
Recently had the entire car painted by a pro, there are no dings, dents, etc on the entire car
Lighting
GDM glass zenki lights WITH motorized control
E-bay Hella Ballast + Philips Bulb HID setup
Stereo
Kenwood deck
CDT 6" components in the doors
CarPC w/ 7" touch screen (I'll include this if the price is right)
^^-- you can monitor and log the AFR / boost on it w/ the PC :)