FS rotors 5lug hubs z32 dont need no mo sale... socal

[bongnak]

yeah want to sell these off. Im located in so cal. pm me or aim or email, aim: bongnak123. thanks guys

(2) rear 5 lug hubs, stock s14 good working condition. one hub has a missing lug stud, just one. sold
http://img163.imageshack.us/img163/4350/hubyz1.jpg

(2) front s14 spindle and lca's, have a pic of one the other is still on the car.
sold
http://img153.imageshack.us/img153/3782/spindlebo5.jpg

z32 brake kit. two front rotors and calipers, calipers have all of the harware. Two rear calipers and rotors, again with all hardware. all have pads on them with id say 90% life. one prob tho, i didnt realize this until yesterday but the two front ones are different. ones a 30mm the other not. they are both alluminum but one has the fins on them the other doesn't. Is that right? anyways asking $320 no .. selling just the rears plus rotors for $100
http://img153.imageshack.us/img153/411/rotorsallro6.jpg
http://img374.imageshack.us/img374/1260/calipershd5.jpg
http://img374.imageshack.us/img374/1553/calipergf1.jpg

[Skullavera]

Looks like you have one z32 front caliper and one r33 gts-t front caliper. Z32 uses the standard 280x30mm rotor but the r33 uses a 296x30mm rotor.

[ronmcdon]

Looks like you have one z32 front caliper and one r33 gts-t front caliper. Z32 uses the standard 280x30mm rotor but the r33 uses a 296x30mm rotor.

i think its the r32 gtr (non-vspec) caliper and rotor. 296x32mm, iirc. you may want to sell them separately. I would have been interested, but i just bought some r32 gtr calipers last week. :(

[bongnak]

hey thanks for the info guys. yeah im not to familiar with brake specs... at this point ill take any reasonable offers.

[qt_240]

could i just Buy the rear Z32 calipers ? and maybe just the one Z32 front caliper? PM me back

[CrazyIvan]

Nvm------------------------

[bongnak]

brake calipers and rotors are still for sale everything else sold. come on guys throw me an offer

[LB.Motoring]

i donno missmatching, no more than like 100 for the pair

[bongnak]

hmm i agree with that^ thats why ill take offers for the whole set, or trade all of it for two front 5 lug hubs from an s14.

[LB.Motoring]

ya you should prob sell them seprately, since

A) Diffrent Calp Sizes, 30mm and 32mm
B) Diffrent Rotor Sizes, not too much, but a pain
C) hhaha, and least, there both the same side kiddo.

suggestion, sell them as an extra for a person who owns these, if their interal items go out, boot etc.

good luck

[hello]

i bought 1992 z32 brakes (the full set, lines, spindals, rotors, calipers, etc.) for my 1990 240sx. i was planning on a 5 lug brake coversion but the spindals wont bolt up. has anyone had any experience with this? will skyline brakes fit?

reach me though aim if you can, it's easier. if not that's ok.
aim. tibscreename

[bongnak]

yeah arent the z32 spindles aluminum and stuff?? i dont im not good with brakes and such im sure if you search you can find out.

And are you sure L.B im pretty sure the two fronts are indeed a left and a right. look even closer hehe.
I dont know i just know someone out there will need these. No use in just leaving them to collect dust but if i have to then so be it.

[hello]

so you sold the s14 spindals? i need that.

[hello]

so you sold the s14 spindals? i need that.

[bongnak]

yeah man theyre gone

[bongnak]

ok im willing to just sell the rears for 100 plus rotors. i'll keep the front for now, i might stumble on a sale in the future

[MikeisNissan]

hey are you willing to seperate the control arm from the spindle, and is it the driver side? ill give you 30.00 shipped for it, desperate need of this. Let me know.

[89KAcoupe]

So... you want $320 for the front and $100 for the rear? if so, very interested. PM me

[drift freaq]

ahem you guys should at dates before bumping threads this one is over two fucking years old!

[racerx2k1]

ahem you guys should at dates before bumping threads this one is over two fucking years old!

What he said.