going SR now, yeah! need to sell KA24DE

[faded1004]

hi, i am finally going SR in my car, and i would like to try to sell my motor in the car right now. here is the info...

WHAT:

93 KA24de with 140,000 miles
compression in cyl #1 is low... 110, 180, 180, 180
fairly new clutch, manual swap in feb?(stage 1)
stock flywheel resurfaced
stock intake with k&n
super slick tranny (religious oil change, heavy shock + mt90, always redline when it was in my hands! changed once in april?)
will include everything (from stock intake to stock s13 exhaust header, with emissions stuff, just no wire harness, but will include ecu)
ngk wires, bought last week!
basic maintinance was done, cap+rotor, water pump, oil pump...
radiator, no leaks

the motor it self is clean, i paid for a nice engine clean 2 weeks ago...

WHEN:

friday july 21, 2006!!!!! that is when the motor will be out and ready for pick up!!!! parts will be on a first come basis, unless deposit is recieved! stock motor should be out by thursday, plus 1 day to break the motor apart... like seperate tranny and stuff...

WHERE:

location of the motor is in "city of industry, CA" at the 60fwy and fullerton... i have access to van and may be able to transport... i have no idea... just let me know if you are interested... and shoot me soem offers... thanks!!!

WHY:

yea i know, i didn't think the motor would start to go bad, but there it is, and now it is time to go SR!!! i really dont' want to spend the money to swap in another KA, even though i had one. i think it is time for me to step up the power alittle bit.

anyways, shoot me some offers for the motor and tranny set, and i will try to get back to you asap... shipping and transport might be arangable, not sure what to say, just let me know if you are interested... when i get back to the shop where my car is i will take a few pics... it is basically a stock motor...

PRICE:

message me if you want full setup... i want this and all the pieces gone~

all prices are negotiable, but to an extent... if you buy more, i will give you better price... let me know!!!

i will be checking this post very often, i need to make sure i get every penny possible for my srrrrrrrrrrrrrrrrr swap! ahahhaha... have a good day...

------------------------------------------------------------------
trades are limited to a few things, i guess SR stuff? here are some of the things i need...

stock sr intake box, or aftermarket intake
s13 koyo
blitz turbo timer dtt X version
turbo elbow
sr greddy oilpan
aluminum driveshaft
cooling panel

------------------------------------------------------------------
part out info:

complete intake($50):
----snorkel to manifold
long block($100):
----head to exhaust
whole motor($200)
----intake to exhaust
clutch + pressure plate($70 shipped)
----stage 1 with low milage
tranny($150):
----very good condition
accessories
----intake gasket(plastic thermal insulating kind - $25) brand new
----ngk wires(literally less then 60 miles - $40)
----flywheel(stock resurfaced 5k miles? - $30)
----radiator, and left over clip stuff...this stuff is no deposit...just ask about it...

***shipping extra unless noted. i won't ship block and tranny, but i will help meet you or drop off... shipping is too hard... i will be able to meet up or you can pick up any of the parts. $30 deposit needed to save parts (big ones only, not accessories)...

[tiresmokes13]

100 for the trans?

[Jung918]

Did you put oil in cylinder one when you did the compression test?

[Rkesh88]

air intake is still on there i presume

[faded1004]

air intake is still on there, the motor is still in car as of right now! it still runs, just alot of smokiness out of the exhaust... instead of going until it blows (headgasket isn't blown), i bought a front s13 clip and i am just going to swap it out before i get stuck somewhere i dont' want to be alone... hahahahaha...

yes, the cylinder sealed up with alittle oil. the 110, was before adding oil... wiht oil it went up high...which means, i am thinking there is alof ot blow by, but there is alittle bit of sealing left, that is why the car is smooth and not too crazy right now... just lost a bit of power and smokey in the rear... and a bit of noise front he engine...

[Rkesh88]

so how much for the whole intake, from the filter to the throttle body

[faded1004]

wow, uhmmm... okay... give a until tuesday to figure that out... i have alot of people asking for part out...

so part out stuff, give me until tuesday/wednesday to get the motor out, and i will start parting out... and possibly give someone a chance to buy the whole setup... i will haev to make a price list of the part out stuff... until then... but we do go through with the intake thing, i will ship it...

intake also includes thermal gasket... the plastic one that doens't conduct heat from the block to manifold... unused... but totally reusable if you install...

tranny, i will have to keep to mutual meet up... that is one big sucka so i dont' think i wanna ship freight. i think i would meet up to san jose or down to sd for small fee?

[frankist]

jason, sell me your tranny. pm me back, ill pick up. :)

[frankist]

whoop. .

[faded1004]

i did a small roll call and i got people who want most parts on the motor, but still nobody who wants full setup. check up on first post for current break down groups...

i will require a deposit of 30 bucks through paypal or cash? just to save. if not, i will sell to next person... i really want to have buyers setup before the motor comes out, so that when the motor comes out... i will be able to get rid of everything asap... i dont' wanna leave the motor at the shop, or take it home...

[frankist]

*wants tranny* :P

[faded1004]

just let me know... i am goign to call monday morning to find out more on when the stock motor is coming out... i will keep updating post as i go... i am sure motor will come out this week...

[faded1004]

updated prices, let me know if you are interested... thanks for looking!!!

[faded1004]

400 for everything, includin the intake gasket and wires and radiator... basuically everythign that comes out of the engine swap ... the tranny does have a short shifter, not too short, about the throw of an s2k or alittle longer! i love it! anyways, just let me know if you are interested...

[faded1004]

motor is out, gogin to break apart on friday or so? basically when the shop has time... they are busy... okay, let me know... it should be ready to go this weekend or beginning of the week i can start droppign parts off...

[faded1004]

http://img112.imageshack.us/my.php?image=dsc00665vc7.jpg
http://img428.imageshack.us/my.php?image=dsc00667lu4.jpg
http://img112.imageshack.us/my.php?image=dsc00666rw3.jpg

here are the pics from my motor!!! new developments!!! looks like my rings are good?!?!?! the people at G-dimension took my motor out and told me my compression was 170-175 for all cylinders? EVEN! so they think itmight be somehting else? i am basically getting a slight rattle internally? not sure what it might be... i took the motor out thinking it was bad rings...

price has been up dated...

[ThatGuy]

Out of 16 posts in this thread, 9 of them are yours. That is excessive bumping.

:lockd: