FS/WT: AE86 Red HB TURBO!

[socals13guy]

LOCATED IN SOUTHERN CALIFORNIA, LA COUNTY.

Make: Toyota
Model: Corolla GT-S Hatchback
Year: 1985
Color: Red
Title: Clear

late model AE92 MAP/DLI

Engine mods:
Built 4A-G(T)E, by Danstoy.
8.5:1 Arias pistons
Cunningham forged rods
Total Seal high-perf. rings
Brand new OEM rod bears, everything re-done with OEM parts, seals and gaskets, new oil pump, water pump.
TRD 1.0 metal headgasket
The head was also cleaned and rebuilt with new bronze valve guides, 3 angle valve job.
ARP hardware. (headstuds, rod bolts, flywheel bolts)
HKS new design camgears.
Exedy stage 1 clutch
SS high rise turbo manifold
New Garrett T25 turbo
Koyo racing radiator 2 core
Samco Radiator hoses
GReddy Type S BOV
OEM LSD
Custom aluminum FMIC piping and downpipe.
Custom FMIC mounts
MR FMIC
TRUST DD Exhaust (NEW)
Japanese Brand Test Pipe
Odyssey Motorcycle battery (relocated to rear)
Odyssey aluminum battery box
B&M "super cooler" 19 row oil cooler (new, not installed)

ALL FLUID IN THE CAR, IS MOTUL.

Engine was dropped in and FMIC/DP piping, clutch install was done by GT Fabrications in Buena Park, CA. www.gtfabrications.com. ALL PARTS ABOVE AND WORK ABOVE is brand new, and was all done back in May/06. Just a couple of months, the ENGINE IS STILL NOT EVEN BROKEN IN ALL THE WAY. BARELY HAS 20 MILES ON THE MOTOR!

Parts alone was over $5230 (i might be forgetting some stuff still), labor was almost $3700.

Exterior:
FRONT bumper is missing, but kouki bumper brackets are there!
Comes with Kouki bumper lights in new condition.
Kouki Rear bumper
OEM AE86 sides with endcaps
[b]TRD molded wing w/ keyhole
Car painted 2 years ago, red.
[b]fenders are primered
Kouki Redlines, clean!

Interior:
Bride Ergo ? (i forgot) driver side
Nardi 350MM deep corn, red stitch (new condition)
TOM's shift knob
UNCRACKED dash, grey interior.
Alpine headunit/cdplayer
MB quart front speakers
Back 1/2 is gutted, but have the interior peices still.
GReddy 60MM mech. boost gauge. 1.5bar reading (new, just installed)
GReddy 60MM elec. EGT gauge. (New, not installed)

Suspension:
JIC front coilovers, 6 damper setting.
JIC front 7.5k coil springs
JIC front camber plates
TRD Rear Japan shocks rear 8 way
TRD Rear 5.5kg race springs
Cusco front OS strut bar
Battleversion rear lateral bar

Wheels:
SSR MKII 14x8, -12 (front) 14x8.5, -7 (rear)
Tires: Falken Azenis 195/60/14

Brakes:
Front/Rear Brembo slotted rotors (new)
Front PBR brake pads (new)

Asking price: I'm open to offers, serious offers. I've been offered $12k+. Anything under than, I wont consider, just because the fact that I just did about $8k+ in the motor work alone.

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/controlvalve2.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/controlvalve1.jpg

What is that you say? Its a idle speed control valve off a late AE92 GZE setup, custom fit to the RWD manifold. (so it looks cleaner, rather than just chillin somewhere) Go look at your manifold, you won't have it. why? because the plates n all, were made custom at the machine shop so I bolt it right up to the manifold so it looks stock. Neat, huh?


http://img.photobucket.com/albums/v723/jdmstylez/turbo86/rear.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/rearwheel.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/front.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/passfender.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/passdoor.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/driverdoor.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/dli.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/engine2-1.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/bride.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/bov.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/batt.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/alpine.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/red86fwy-1.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/redlines.jpg

http://img.photobucket.com/albums/v723/jdmstylez/turbo86/turbo.jpg

NO LONGER TRADING..

[tiresmokes13]

thats VERY VERY nice.

[blaze1]

Better quality pics could really boost the sell.

[S13 Charlie]

Very interesting. I like the engine work, it looks great, very impressive. One question though.. is there any chance that the car could pass a smog test in its current setup? I'm thinking no, but hey, who knows? How many miles on the chassis?

thanks,

C

[rubelcon]

Scott-

Did not know you were an S13 guy. GL with the sale here!

-Brian

[51LV1A]

scott?!?...haha...don't sell the hachi...its Eric, Jeriels friend.

[socals13guy]

rubelcon & 5ilv1a - im scotts friend

s13 charlie - doesnt pass smog but have a guy that passes it..and 200k on chassis

[kouki_s14]

Dam Scott you're really selling it now? Nate wasnt sure if you were really serious, but here are some pictures for you. Good luck with it bro

http://i6.tinypic.com/1zlqjpz.jpg
http://i6.tinypic.com/1zlr61l.jpg
http://i6.tinypic.com/1zlr80y.jpg

[socals13guy]

BUMP!
(this is scott, on eddie's SN, to bump it up!)

yo what up brian..

yo what up henry.. thanks for postin more pics of my ride.

(i'm out, lates!)

[breakindrifts]

Nice car, the seat is BRIX2 just so you know.

[socals13guy]

Nice car, the seat is BRIX2 just so you know.

Actually it isn't. You can tell because the Brix and the Ergo 2, the top of the gradiation is rounded off. Now look at the seat in the Corolla, the top if flat, these are harder to find, but not really rare.

[rubelcon]

It's a Bride ERGO

[socals13guy]

It's a Bride ERGO

Yup, the Ergo (the 1st one)

[socals13guy]

bump! no one?? trade? for clean SR-powered coupe + (+/- cash)?

[socals13guy]

bumpity bump! sooowooo!

[kouki3015]

it's darwin. dang scott, finally finished it and now you're selling it? ey hit me up. i got a new #. [email protected]

[jdm538]

wanna trade my brix plus cash for your ergo.

[socals13guy]

wanna trade my brix plus cash for your ergo.

thanks but no thanks.. bump!

[zenki-217]

pm sent. possilbe deal?

[zenki-217]

What kind of # does it put down?

[socals13guy]

What kind of # does it put down?

engine is barely in break in progress, currently has less than 15 miles on the full rebuilt engine. bump!

[bunta_garage]

bump for a clean ride

[socals13guy]

bump for a clean ride


thanks, bump!

[thaivietg714]

oh shit! props and bumps for a clean rolla. dam!

[twofocused]

Badass Rolla! Good luck!

[Fat Felix]

someone buy this so scott can buy my car :)

[socals13guy]

thanks twoconfused

haha felix

[socals13guy]

bump!!!!!!!!!!!!!!!!!11