If you need S13 parts I am your man!

[MarketPlayer]

As many of you know i have started a few threads pertaining to this topic and here is this weeks. I am available every friday to play in the junk yards around Orlando Florida, and have access to six S13s in my immediate area, and probobly more if I try harder!
The more stuff you guys want the harder I will try to get the lowest prices possible! Now, I am not going to lie to you and say i will be giving my services away but, I am pretty much! So far I have helped out three fellow members w/ parts, and hope i can serve many more in the future! I am not out here to scam, cheat, or take advantage of anyone, by charging them an arm and a leg for USED PARTS! Simply if the part you request is an easy find and simple to remove, there will be little to no charge on that item.
For example: I just sent out some interior trim pieces for free to one member; headlight connectors and moonroof seal at cost to another member; and charged another member a $10 labor fee on their power window motor.

Here is how everything is going to work...
1) Poste your part request in this thread (be as detailed as you can)
2) Await a PM/e-mail from myself
3) If part requested is going to be over $40 then I will need advance payment for part/shipping
4) If part requested is under $40 then I will need a PM/email confirming your request BEFORE Friday morning
5) If part requested was available then I will send you confirmation via PM/e-mail
6) Once all payments are recieved, the part will be shipped out that day or the following
7) Once shipped I will send out a Shipping Confirmation including Tracking # via PM/e-mail

Please keep all PM/e-mails for your securety!

Here is all the personal information That should make you more confertable w/ this...
Zachary Penn
10151 University Blvd #164
Orlando Fl, 32817
[email protected] .com* is my prefered e-mail address
[email protected] is my Paypal Account

I will take Personal checks**, Money orders, and preferably Paypal as payments

*I have to seperate the .com or else you can't see the underscore!
**personal checks must clear before friday morning if part requested is over $40 and must clear before i ship, if the part requested is under $40!

[BEISSEN]

Do you have any 95-98 240's out there.I need a rear deck cover for my 240 cus i cut the holes to big so my speaker grills wont go back on.This is easy part a matter of unsnaping the rear deck cover it;s that grey cover in the back i will post a pic just look where my speakers are and you will see.Its that grey thing.I had my speakers mounted on top but they kept ratteling the rear plastic cover so i mounted them the ight way and no more rattle just to big of a hole.lol thanks.

[aricanderson]

Market,

thanks for sending out those trim pieces.  The car now looks as though it coming together quite nice.  I may need a few other parts later.  I still trying to decide if I want to do a tranny swap from auto to manual.  Can you find out the price plus shipping for  a 5 speed tranny, shifter, slave cylinder, an d a clutch pedal?  Since my auto is leaking fluid I need to do something by the end of summer.

thanks

[srJOEYdet]

Hey thats really nice of you to offer all of this for everyone. Can you give me a quote on a power steering pump from a 91-94 240? I think the 89 and 90 had the same pump, so those might work too. I live in oregon. Thanks.

Joey

[nas240man]

do any of those s13's have vlsd's? interested in one of those definitely

[Tommy Gun]

hows it going, I have been looking for a drivers side fender for my brothers s13 for the longest. It is a black car but any fender would be apreciated. thanks alot for your help and time in looking into this. you can reach me at [email protected]

[HKrpS13]

I am looking for the "end tie rods" and "lower control arms" for both left and right side (both of the items). My bushings are cracked/ dead so I'm looking for ones in good condition. email me the price and availability on those two items.
[email protected] or [email protected]

[CFerrari]

ok, Id like a full Silvia front end w/panels and sr20det.

[FriscoMgM]

You've got mail that basically says:

Hi,

I saw your post on Zilvia.net and I think it’s awesome what you are doing for people.  The junkyards out here in AZ have nothing….  Anyhow, here are my requests:

1) Fender grommets (see attachment)
2) Black grilles that go under the front turn signals (91-94 front bumper)
3) Nissan bumper emblem for 91-94 front bumper
4) Wind deflector piece with springs intact for 89 Coupe Sunroof. (see add’l attachment)

Let me know ASAP if these parts are available and we can get some Paypal action goin on!

Thanks,

-Mike
89 Coupe in AZ.
[email protected]rthlink.net

[aricanderson]

oh yeah can you get me a price on the right front side marker.  I just need the part that the bulb goes in and connects to the wire.  Email me at [email protected]

Thanks a lot

P.S.

GREAT SERVICE

[two240s]

I need the front Nissan embem for an S13 also.
Thanks

[MarketPlayer]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (CFerrari @ June 19 2002,03:28)</td></tr><tr><td id="QUOTE">ok, Id like a full Silvia front end w/panels and sr20det.</td></tr></table><span id='postcolor'>
Sorry everyone i can get nothing that is JDM only USDM junked 240sx's! &nbsp;I will poste a more detailed reply later!

-zac penn

[Jammon]

Yea hi I am looking for the following..
KA24E whole engine basically if applicable block and head.
or just head with complete internals
a running ka24e would be great so i could just drop in ...
umm can you suggest a price range for these ..
email me back at ..
[email protected] ..
im in FL too..

90' Crap SE auto junk that just needs an engine and it would kick ass.. (haha)

[s13cruzer]

hey man , i am just lookinhg for some small ticket items , a front s13 eblem if you got it and i need three relays , i am having trouble finding them and don't wanna pay nissan dealership prices , the relays i need are in the right side fuse box , they are the three that say ---H/L RET DOWN----H/L RET-----H/L RET , three of them in the bottom right side of that box , if you can get back to me with a price i'll buy , and maybe bigger things later on , thanks

M1K3
[email protected]

[240Driver39]

Hey, i just need the black plastic piece that runs on the very bottom of the S13 front end, if u see ne in good shape let me know

[bheld]

Hey, I'm looking for a grey center console and the other part that runs up and around the radio on the S13. &nbsp;Also I would like to get rear speaker grilles. &nbsp;Thanks for helping everybody out.

[SlowEXd]

I need the manual sunroof latch/handle assembly, and the weather stripping if it's in good shape.
And do you have any limited slip diffs?
Thanks
Matt
[email protected]

[MarketPlayer]

Sorry everyone, but i didn't get to go to my favorite junk yard today, b/c they were doing inventory! &nbsp;I did however get a few things.

Aricanderson...
I looked for the right front sidemarker at one yard and they only had the actualt lense, but another yard had the drivers side connector, and figured it would work? &nbsp;I will go home and check to see that they are compatible. &nbsp;I also got a quote on the tranny for $200 w/ 155K miles on it. &nbsp;That price is for them to remove the tranny and then i have to remove the clutch pedal, slave cylinder and shifter, so I will have to charge some labor if it is a bitch to remove. &nbsp;I am not going to estimate on shipping b/c i have been wrong everytime i do. &nbsp;If anyone has ever shipped a tranny please tell us how much it cost you.

s13cruzer...
I couldn't get access to a 91+ 240 today, but i did get the three relays from a 1990fastback, and think they should be the same. &nbsp;It cost me $10 so send me your adress and i will get back to you on shipping charges.

Whoever needed the power steering pump...
Two people wanted one but one backed out so whoever still wants one it will cost $50+ shipping. &nbsp;Send me your adress andwe will talk further!

Tommy Gun...
I couldn't get to the black s13 today, but i got a quote from one yard w/ a primer colored fastback frontfender of $50+ shipping. &nbsp;send me your adress and we will talk further.

HKrpS13...
the end tie rods can not be had b/c it is part of rack and pinion steering and they don't want to seperate them. &nbsp;I can try further if you want. &nbsp;The lower control arms will cost $30each+shipping. &nbsp;send me an email and we will talk further!

Jammon...
I will have to part together an engine for you from two yards, b/c one has a cylinder head and the other has the block. &nbsp;The engine will need a rebuild along w/ the head but i can get you the bare minimum for $200 or i can have someone at work rebuild it for you and then sell it for $550-$600. &nbsp;Let me know what you decide...

bheld...
I can get you the speaker grills, center console, whatever the piece is you are talking about around the radio for $50+shipping. &nbsp;Tell me exactly what you are talking about for the radio trim piece. &nbsp;Is it the spacer under the actual radio that you can put trash/reciepts in? or something else?

These are the parts i couldn't get to today...
1) Fender grommets (see attachment)
2) Black grilles that go under the front turn signals (91-94 front bumper)
3) Nissan bumper emblem for 91-94 front bumper
4) Wind deflector piece with springs intact for 89 Coupe Sunroof. (see add’l attachment

I need the manual sunroof latch/handle assembly, and the weather stripping if it's in good shape.
And do you have any limited slip diffs?

the black plastic piece that runs on the very bottom of the S13 front end...I don't even know what you are talking about.

the front Nissan embem for an S13 also.

Do you have any 95-98 240's out there.I need a rear deck cover for my 240 cus i cut the holes to big so my speaker grills wont go back on.This is easy part a matter of unsnaping the rear deck cover it;s that grey cover in the back i will post a pic just look where my speakers are and you will see.Its that grey thing.I had my speakers mounted on top but they kept ratteling the rear plastic cover so i mounted them the ight way and no more rattle just to big of a hole.lol thanks.

[coolerow]

When's the next time you're going?

I was looking for a some parts (S13) but had no luck in finding them, hope you can:

1. Power windows switch/ driver's side.
2. (2)Headlight surroundings (black plastic molds that go around headlights).

[ffdet]

I'm looking for a steering rack in good condition for my S13.. mine is leaking pretty badly. Email: [email protected] or just PM me.

[240Driver39]

Okay, i have a pic that shows the piece im talkin about, the quality is low, but should tell ya what i mean

http://www.geocities.com/red240sx39//blackpiece.jpg

[sleek240]

i need those rubber boots that go on the shifter the ones under the consoule .. it has a base with 4 screws ,, and another around the shifter .. i think u can get them off any 240 but if not i have a 96 &nbsp; thanx

[avirex_racing]

Hi man I have a 95 240sx, I need ac bracket, I the motor with the bracket. Now the sr20det needs the bracket.

[badas13]

Hey man... I was wondering if there was any way you could get me some SILVIA (S13) seats and other interior peices.. lookin to make my conversion AUTHENTIC! thanks alot

[phil0729]

Hey im just wondering can u get the S13 conversion fenders and hood???

thanx

[DriftMonkey]

this might seem a little extreme but i want to do the tranny swap on my 89 coupe and i have been looking in my area to find any 240's that i could buy for parts cars...but so far i have resorted to leaving a note with my phone number and email adress on a broke down 240 on the street....that hasnt worked yet. &nbsp;so i am asking you, MarketPlayer, if it at all possible to get me the parts i need to do the swap.....this is asking alot, i understand that....i cant give specific parts that i need but in general i need all the parts to do the swap...this will cost a buttload but i am willing to pay..
&nbsp; &nbsp; &nbsp; i understand that this is asking alot but if you could just email with some type of response i would be thankful &nbsp;
&nbsp; &nbsp; &nbsp; [email protected]
thanks

[Fresh 240SX]

Market,

I need a Center piece from the tail lamps from a FB S13...
whats that gonna run me...... even check for the whole tail lamp set if its reasonable ill get the whole unit....

Thanks....

[/etc/shadow]

I need 2 front 240sx SE hubs (5x114 bolt pattern) and 2 rear SE hubs for the 5 lug conversion.

[mbmbmb23]

Guys.....stop requesting Silvia parts.....he doesnt have them.

[MarketPlayer]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (mbmbmb23 @ July 15 2002,10:49)</td></tr><tr><td id="QUOTE">Guys.....stop requesting Silvia parts.....he doesnt have them.</td></tr></table><span id='postcolor'>
Thanks alot...I CAN ONLY GET USDM USED PARTS. &nbsp;That isn't limited to 240sx either, i can get almost any used part for any car!

[allstars1380]

i emialed you a couple of days ago... i was wondering if you got it... if not can you send me an email [email protected] i need alot of parts thanks

[240SX21]

perfect, i am in need of some parts for my 89 S13. &nbsp;i need any/all of the parts below marketplayer. &nbsp;email me at [email protected] & let me know how much you would need. &nbsp;thanks!

1) moonroof(or just the seal if you can't get the entire moonroof)
2) manual tranny heat shield(metal sheet that goes right below the center console on a manual tranny)
3) manual tranny cover(that covers the tranny from the bottom of the car)

sorry for not knowing the exact names of the parts, but they're both visible without removing anything from the car(except for the center console which is just a snap-off).

[student]

I need a charocoal grey floor carpet fora '92 240sx the entire floor carpet with no holes not the mats but the carpet.

[student]

I need a charocoal grey floor carpet for a '92 240sx the entire floor carpet with no holes not the mats but the carpet.

[student]

I need a charocoal grey floor carpet for a '92 240sx the entire floor carpet with no holes not the mats but the carpet.

[technochronic]

I am looking for a radiator core support for my '89 fastback. &nbsp;must be in perfect condition with hood latch assembly intact. have cash in hand. any help would be appreciated.
Ken
email: &nbsp;[email protected]

[StanBo]

I could use a HUD from a 1993 Coupe SE.

[max power]

can you help me out?

97-98 240sx SE

Left Fender
Hood
Bumper cover /w reinforcement /w spoiler if avail.
Radiator Support
Horn beeper thingie <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'>
Headlights with clamps etc..
Side marker lights
Fog lights
condensor cooling fan /w motor & housing
fan blade for main cooler
Dashboard
Air bags
cut-out of left portion of frame up to strut housing

let me know, thanks

[kazuo]

Yo!

I could use a driver side door panel (I have power windows, so yeah)... no damage or wear, of course, I need it in Black.... thanks.

Anyways, whee, first post!

For those of you who were in the caravan for the Con and are reading, I was the dumbass in the primered S13... no, not the Chinese guy, the guy who actually drove. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'>

laters

[projectsilvia1]

I am looking for a 91-93 front bumber cover and support.
I have an 89 and want to change to the newer front end.
thanks
[email protected]

[tkrolo]

I need a hud dash for my 93 coupe. Don't need the whole guage cluster, just the board that controls the speedo with harness.( I think it can be removed seperately). Thanks

[mumbles]

i would like to get the locking rear diff for my 89. along with the drive shafts. If you can find them that would be great and get me a price. my email is [email protected] i don't have paypal but i can send you the money by snail mail. thanks
chris

[locski]

I need an ashtray (center console, right next to the e-brake) for my S13.

Thanks!

[91CRXsiR]

i need the cruise control plate for the gas line. for a 89 SOHC

[srJOEYdet]

My spioler makes cracking noises when I flex it. It is WAYYYY rusted out. I need a black spoiler for an S13 hatchback. Stock, I doubt you will find anything else. If you do, get me one that hugs the body, so I can rattle can my hatch repairs, and nobody will see em.

thanks,
Joey

[sr20mofo]

and i'll take a 20 piece chicken nuggets with supersize fries and coke and also a strawberry sundae.. thanks!! oh if theres a cute trailer trash bitch that works there, i'll take her also <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> anyhoot... if ya gots s14 driver and passenger seats name ur price... perferably leather since my POS is leather

[Archangel]

This one's doubtful, but I gotta ask:
factory ground effects off of a 97/98 s14.

Thanks.

[InterC00l]

I need power steering lines from a 91-94 with the resovior to put PS back on my sr20det swapped s13. also, a center console lid would be nice.

[email protected]

-InterC00l

[Two4zerO]

can you find a 5 lug s13...and a s14 front lower control arm..thanx