PDA

View Full Version : 95' KA24DE Parts & blocks. .. .


NI_YON_Zenki
06-27-2006, 02:46 AM
This is preferred so_Cal (due to shipping circumstances) I don't really have the time to deal with .. ..unless you need multiple parts

all that I have is sold as is. .. .you see what you will get. .. .

Either way, I will send images upon request and post some images later on this week, prolly by wednesday for convenience. .. .

These have to Go, so i'd rather them go toward a good home over a scrap yard potentially, just to get them out!

anyhow, I have 3 blocks total.

#1 is completely stripped; its frozen; reasonable offer; (( $50-65, requst preferred ))

2 has a good head on it, internals are here & there, they were spare used for the complete sitting under my engine bay currently; since it was spared for parts, it has been outside for a few months, covered during rainy season ; $75 obo

#3 which is a great setup for a rebuild, I've come to find that the compression is not right, the rings are more than likely roasted. .. .

just bore it to fit Z32 pistons, or just fix the rings, I have a very strong 5-speed as well on it, good Autozone clutch. .. .no street use yet, brand new.

I have full harness, and its clean. .. .$295 for complete. new plugs, new oil filter, new clutch (as mentioned) new fuel filter. and new clutch slave cylinder.

And I have the s13 cams// very good shape, images as well for anyone interested in that modification; (( add $50 to the $295 complete engine layout )) or just the cams, you get it.

I reside in So Cali

PM, E-mail for direct contact and possible pickup

Much apprciated, this is Skipper

Thanks for looking, spread the word like pollen_Peace

m0rex
06-27-2006, 02:59 AM
How much for the autozone clutch?

drift into a curb
06-30-2006, 06:51 PM
skip. i emailed you. i need a head! get back to me mang. thanks.

james