rolling fender without fender roller :P

[Kuzumi]

i was gonna roll my fender myself with a rubber mallet or whatever i could find unless someone in the DFW area has a roller i can borrow :coolugh:

[DJPimpFlex]

Baseball bat and heat gun.....works ok...wood bat only, metal doesnt work as well.

[Kuzumi]

will someone let me borrow their wooden baseball bat?

[Pank]

go to the sportings goods store and buy a shitty one, they're cheap

[drifter808]

when me and RiceEata did it we just used a 3 inch pipe. came out pretty good to.

[RightWheelDrive]

+1 with the pipe. Easy as pie. Just roll the pipe as the wheel turns to keep it smooth.

[Chrischeezer]

go to a wheel/rim shop.. the'll ahve one

[projectRDM]

Lead pipes work best since they're somewhat soft. A hot afternoon, a pipe, and 20 minutes is all you need. Beer optional.

[!Zar!]

Mallet and head gun works well for me.

Use the bat or whatever you are using for the back.

For the front just use a rubber mallet since the fenders are easier to work with than the rear.

[sw20>>s14]

or borrow a roller from smelly melly...love you long time ;) <3

[hotrodv]

Hammer! and a bat..

[S14DB]

A Youth Louisville Slugger is $19.95 at Sports Authority.

[Pank]

I am actually so tough, i roll my fenders by lowering my car, and placing my penis between the wheelwell and tire.

[S14DB]

I am actually so tough, i roll my fenders by lowering my car, and placing my penis between the wheelwell and tire.
Is that why they call you The Eunuch?

[Arsenal of Glory]

a pipe works too...
you wont get the fender lip nearly as flat though.
A fender roller will get it totally flat against the fender.
you can also use a hammer and something supporting the backside of the fender and hammer until flat/desire

[Pank]

Is that why they call you The Eunuch?


Only since the recent ..."accident". The japanese had a term for me, which roughly translated to "The Calloused Rod", the westerners called me "Labia Grinder"

[Irukandji]

It's amazing how many times this has been covered.

hammer, heatgun/torch, old shoe.

use common sense to figure out what to do.

[exitspeed]

The hammering technique doesn't work as well as just a baseball bat. Just wedge the baat between the fender and tire (the lower the car the easier) and press the fender lip in. Do it slowly and work your way back and forth.

We just did my friends like this on thursday.

[REDSH!FT]

Uh...unless your car is actually low...in which case you'll snap the bat and put a gigantic dent in your 1/4 panel and maybe bend a wheel.


Get a fender roller...they're like $180 or something from eastwood.com

Buy it, use it, sell it.

[phrozen]

blah just make one, get a spacer a skateboard wheel and ur imagination, and make one

[theicecreamdan]

I used my 16oz framing hammer.