PDA

View Full Version : JDM S14 stuff for sale |project mu|buddy club|jdm silvia|ka turbo|sr20det|fmic|


bimmerlover
06-20-2006, 04:22 AM
Okay guys, it is really important to clear all this stuff out within the next two days, so please purchase away!

1) JDM S14 Kouki DIN gauges - I bought these gauges for $200 plus shipping from Japan. I was going to use them for my KA-T project, but I'm abandoning that project and going with an SR.
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc2NjZzNDEzZGZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc2NzZzNDEzZGZkMzF5NTQx.jpg
$150 shipped

2) JDM S14 Zenki grill |sold| - I bought this grill before I did an entire Kouki conversion. I have no use for this anymore. This grill is painted Pearl White and is absolutely perfect. It does not have the "Silvia" emblem (which looks better, IMO). The chrome slats are still shiny, too!
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc2ODZzNDEzZGZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc2OTZzNDEzZGZkMzF5NTQx.jpg
$60 shipped

3) Project Mu B-Force F232 front brake pads - These brake pads will fit '89-'94 S13's with ABS and will also fit 1997-1998 S14's. These pads are brand new. I made the mistake of purchasing these for my Zenki, but they don't fit.
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc3MDZzNDEzZGZkMzF5NTQx.jpg
$80 shipped

4) KA24DE SSAC top-mount turbo manifold with custom 3" downpipe - I was planning to go turbo, but switched over to the SR. The manifold has never been used, as you can tell by the shininess. The custom 3" downpipe was made specifically for use with the SSAC manifold. The downpipe also has an O2 inlet.
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc3MTZzNDEzZGZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc3MjZzNDEzZGZkMzF5NTQx.jpg
$300 shipped

5) JDM S14 Kouki fiberglass rear valences - These valences are fiberglass replicas of the real thing, but they are a perfect fit. There are a few cracks, it can easily be repaired. They are currently painted Pearl White.
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc3MzZzNDEzZGZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc3NDZzNDEzZGZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc3NTZzNDEzZGZkMzF5NTQx.jpg
$100 shipped

6) SR20DET 370cc fuel injectors - These fuel injectors were pulled out of a working SR20DET. These are perfect for your KA24DE-T.
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc4MDZzNDEzZGZkMzF5NTQx.jpg
$80 shipped

7) Buddy Club P1, a.k.a. Kosei K1 |sold| - These rims are ultra-rare; you can hardly find a set anywhere, especially the original Buddy Club version! The Buddy Club P1's are the same exact thing as the Kosei K1's, as we call it stateside. And yes, they're JDM. And yes, they clear Z32 brakes. They're 5x114.3; 16x8.5 +17R; 16x8.5 +37F. Slap on a set of spacers for the front and you're ready to go. And not to mention, they're ultra-light! Really light! I'd give a rough estimate of 14-15 pounds per wheel. Now, the paint has seen better days as these rims were discontinued several years ago. The curb rash is minimal. It's just the paint, and there's some brake dust that kind of gotten molded into the paint because of the lack of washing. Honestly, if these were dedicated track wheels, I'd leave the paint the way it is. No bends, no fuss.
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc3NjZzNDEzZGZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc3NzZzNDEzZGZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc3ODZzNDEzZGZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTI2MTc3OTZzNDEzZGZkMzF5NTQx.jpg
$400 plus shipping

8) Front mount intercooler - I also have an FMIC for sale. I'm not sure of its dimensions, but it pretty short. I'm guessing 3"-4" in height and 24-27" width. You don't need to cut up your reinforcement with this intercooler. It also has rubber couplings on its end tanks. No piping.
$100 shipped

Guys, I need this stuff gone!

bigteddyted
06-20-2006, 04:03 PM
ill take the grill

bimmerlover
06-20-2006, 04:29 PM
ill take the grill

PayPal me $60 to [email protected] and I'll ship it out this afternoon.:fruit:

ICKY
06-21-2006, 09:56 AM
Interested in the FMIC and Manifold+Downpipe. What is the flange type on the Manifold? What's the boost rating of the FMIC?

bimmerlover
06-21-2006, 03:55 PM
Interested in the FMIC and Manifold+Downpipe. What is the flange type on the Manifold? What's the boost rating of the FMIC?

Not sure what the flange type is, though, I'll take more detailed pictures and send them to you. And I'm also not sure what the boost rating on the FMIC is. Sorry for the lack of information, but send me your email address and I'll send you the pictures right away. Hope you were still interested, thanks.

bigteddyted
06-22-2006, 02:35 AM
pmed you......

bimmerlover
06-22-2006, 01:08 PM
I'd like everyone to know that the Silvia grill and the Buddy Club rims have been sold. Everything else is still available.

spdfreek0o
06-26-2006, 05:39 PM
I sent you a couple PM's get back at me.

AznXstazy
06-26-2006, 07:06 PM
wat turbo fits on the manifold?