turtl631
06-17-2006, 11:12 AM
S13 coupe decklid: Greenish gray color, no wing or holes, just a few small (<1cm dings) with tiny rust spots in center. $45
http://i11.photobucket.com/albums/a160/turtl631/CIMG0432.jpg
J30 VLSD: 5 bolt output shafts, lower final drive. $200
http://i11.photobucket.com/albums/a160/turtl631/CIMG0437.jpg
Stanza fans: Similar to Altima fans, just have slightly different shroud and require a bit more trimming, no big deal. Fans/wiring are the same as Altima. $60
http://i11.photobucket.com/albums/a160/turtl631/CIMG0456.jpg
KA24DE flywheel: I bought this with an ACT XTSS clutch, the guy got it resurfaced and put the new clutch on with a built KA. He broke it in for about 500 miles and then shortly after his KA threw a rod while cruising, so I bought the clutch/flywheel. Shouldn't need to be resurfaced since it was just broken in, never even dragged on or shifted hard since the engine hadn't been broken in yet. $40
KA24DE flywheel: This one came off my 120,000 mile engine. Clutch was slipping a little, but was never really abused by me, and the flywheel and disc didn't look too bad at all. I have a lot of the service records from the original owner of my car and there's no mention of a clutch job, so I imagine this one hasn't been cut. $25
Z32 N/A fuel pump: From a 1990 N/A Z32 300ZX, $30.
http://i11.photobucket.com/albums/a160/turtl631/CIMG0454.jpg
S14 clutch fan: Took this off to put on Altima fans, my car is a 96 so its probably in way better shape than a clutch fan from an old S13. $15
S14 driver's seat: From 96 SE, upholstery is in excellent shape with no stains, holes, or tears. Plastic cover for recline handle is missing. Comes with rails too, just bolt in. $100
All prices are picked up, you pay shipping (from Chicago, 60638). If you have any questions or want to make an offer, hit me at rrozyckATgmailDOTcom for fastest response. I check that more than my PMS.
http://i11.photobucket.com/albums/a160/turtl631/CIMG0432.jpg
J30 VLSD: 5 bolt output shafts, lower final drive. $200
http://i11.photobucket.com/albums/a160/turtl631/CIMG0437.jpg
Stanza fans: Similar to Altima fans, just have slightly different shroud and require a bit more trimming, no big deal. Fans/wiring are the same as Altima. $60
http://i11.photobucket.com/albums/a160/turtl631/CIMG0456.jpg
KA24DE flywheel: I bought this with an ACT XTSS clutch, the guy got it resurfaced and put the new clutch on with a built KA. He broke it in for about 500 miles and then shortly after his KA threw a rod while cruising, so I bought the clutch/flywheel. Shouldn't need to be resurfaced since it was just broken in, never even dragged on or shifted hard since the engine hadn't been broken in yet. $40
KA24DE flywheel: This one came off my 120,000 mile engine. Clutch was slipping a little, but was never really abused by me, and the flywheel and disc didn't look too bad at all. I have a lot of the service records from the original owner of my car and there's no mention of a clutch job, so I imagine this one hasn't been cut. $25
Z32 N/A fuel pump: From a 1990 N/A Z32 300ZX, $30.
http://i11.photobucket.com/albums/a160/turtl631/CIMG0454.jpg
S14 clutch fan: Took this off to put on Altima fans, my car is a 96 so its probably in way better shape than a clutch fan from an old S13. $15
S14 driver's seat: From 96 SE, upholstery is in excellent shape with no stains, holes, or tears. Plastic cover for recline handle is missing. Comes with rails too, just bolt in. $100
All prices are picked up, you pay shipping (from Chicago, 60638). If you have any questions or want to make an offer, hit me at rrozyckATgmailDOTcom for fastest response. I check that more than my PMS.