manifold, wastegate, intercooler... everything!!!

[sunnys14]

tial wastegate springs! (red= 5.25 psi, yellow=3.5 psi, green=7.25 psi) - $20 each
http://i31.photobucket.com/albums/c380/fall3nstar05/Picture123.jpg

Hybrid FMIC + piping + couplers + Tbolt clamps+ HKS BOV on hotpipe $425
http://i31.photobucket.com/albums/c380/fall3nstar05/DSC05763Medium.jpg
http://i31.photobucket.com/albums/c380/fall3nstar05/DSC06365Medium.jpg

s14 valve covers - $20 each (i have 3)
http://i31.photobucket.com/albums/c380/fall3nstar05/DSC03681Medium.jpg

s13 ecu (5speed) - $50
http://i31.photobucket.com/albums/c380/fall3nstar05/Picture130.jpg

s13 ecu to s14 harness (the one enthalpy uses for his s14 ECU tunes, lets u use s13 ecu on your s14!!!) - $100
http://i31.photobucket.com/albums/c380/fall3nstar05/Picture131.jpg

ASP cranky pulley - $75
http://i31.photobucket.com/albums/c380/fall3nstar05/DSC06366Medium.jpg

s15 480cc injectors - $200
http://i31.photobucket.com/albums/c380/fall3nstar05/DSC06371Medium.jpg

MSD Boost Timing Master (retards 1-3 degrees per lb of boost!) - $100

S14 distributor (already modded to trigger MSD) - $65

Greddy Full auto turbo timer (harness cut, so you would have to hardwire it, very easy) - $60

S14 95-96 SE white gauge cluster (146k miles) - $75

ill ship if buyer pays... please dont make this a flakefest...

[NemeGuero]

Do you have all the fittings for the return line? Is it steel braided or silicon?

[sunnys14]

yes i have all but the fitting thats already welded to the oil pan. its steel braided line.

[yokotas13]

20 shipped for hte voltmeter please?

[punxva]

so im guessing the intercooler piping is for a KA-T setup? And will the ASP pully work for a s13? if so i'll take it, pm me your info on how you want me to send the money.

[napoleon]

I'll take the ASP and oil lines if they back out. Also, i will take the DP and midpipe and wastegate. I will give you 200 for the DP and midpipe and 150 for the wastegate and the green spring. I can pay now. It might take me a few days to get back to you.

[sunnys14]

so im guessing the intercooler piping is for a KA-T setup? And will the ASP pully work for a s13? if so i'll take it, pm me your info on how you want me to send the money.

yes the intercooler is for a KA-T setup. yes the ASP pulley will work for a 91-98 ka24de. let me know when u are ready to pay.

[PXRdriFT]

pm sent your way about the gauges.

[yokotas13]

are you going to reply to my PM about the gauge?

[NemeGuero]

Will you ship me the oil pan too?
And the return line? How much for them both? I can return you an un-drilled pan.

[biggie]

If willing to just sell the hotpipe, let me know.

[email protected]

[sunnys14]

Will you ship me the oil pan too?
And the return line? How much for them both? I can return you an un-drilled pan.

i can ship you both oil lines (feed and return) and sell you the oil pan also (55 bucks)

i also have 2 spare oil pans if anyone wants them.

[sunnys14]

If willing to just sell the hotpipe, let me know.

[email protected]

im selling the hotpipe and mid pipe together (youre going to need the mid pipe anyways because the hot pipe doesnt connect directly to your cat)
let me know if u want it please!

[sunnys14]

are you going to reply to my PM about the gauge?

if youre in the states, it will be 25 shipped for the voltmeter gauge. i will not ship out of the country.

[biggie]

im selling the hotpipe and mid pipe together (youre going to need the mid pipe anyways because the hot pipe doesnt connect directly to your cat)
let me know if u want it please!
By hot pipe I meant the pipe from turbo to the intercooler.

Let me know if you are willing to sell just that piece as opposed to the FMIC kit as a whole.

Thanks.

[NemeGuero]

I kinda only need the return line and the thing welded on the pan.
Can you send me some pics of where it was welded to the pan?

[email protected]

Also, where do I paypal? 55 shipped? Or you wanna just meet up? How far are you from Berkeley?

[Id RaThEr DrIfT]

how much for the bov with flange ? since the intercooler aint for an sr

[go240]

i will take the fmu and both oil lines. i can paypal immediately

[redsilvia]

Is the turbo timer black?

[gnuproject]

I pm'd you, pls respond

[yokotas13]

The guage is going to 96326
ill do 25 shipped

all you gotta do it fill out one form and ill give you 5 bucks to do it

[ichibausa]

Sent you a PM. :hsdance:

[turbodreams954]

ill take the manifold, d/p, and do you have a dump tube?if you still have those things. ill also take the 7 psi spring for the prices you have listed. shoot me a PM on shipping to 33068.

[sunnys14]

downpipe sold

go240 - paypal 135 shipped for the FMU + oil lines to [email protected]

redsilvia - yes the turbo timer is black

turbodreams954 - downpipe+midpipe is sold. manifold and 7psi spring still up for grabs. if u want them together, $310 shipped to you. paypal [email protected]

[go240]

ok, i got an fmu locally (i think, i have to call to make sure he still has it. otherwise i'll get yours) but i still want the oil lines - how much shipped to 55422 for just the lines?

[turbodreams954]

ehh was really not wanting to have to get a d/p fabbed. but ill let you know.

[sunnys14]

manifold is sold!

[turbo2nr]

will the ecu harness let obd2 cars run obd1 ecu?

[sunnys14]

the harness is made to let us s14 owners run a obd1 s13 ecu. enthalpy doesnt tune s14 ecu's. instead he retunes a s13 ecu and sends this harness to make the s13 ecu work for s14s.

[go240]

alright, well my local fmu didn't work out - i will paypal you now $135 for the fmu and oil lines

[NemeGuero]

Damn, I just got doushed on those lines..

[sunnys14]

FMU and oil lines sold!

[fandango]

PM sent

I will send paypal asap!

[sunnys14]

tial wastegate sold!

[fandango]

Gauges gone?

[gearhead290]

PM sent on IC, Injectors, and Pulley