coldfire07
05-29-2006, 06:57 PM
I have decided to sell most of my turbo setup because my car will be down for a while and I need the money. It's a near complete setup that has a lot of custom work that should bolt straight up to an s14. The setup was used for around 3000 to 4000 miles and I am very careful with all of my parts. The turbo was given time to cool down after every drive and has no shaft play. The manifold is still under warranty from IAP for another 2 months I believe. I will send an email asking the warranty to be transfered to the buyer if he so wishes.
We'll start off with the part list.
------------------------------
Garrett T3/T04E .57trim .63 a/r
Import-AutoPerformance T3 manifold
Custom made stainless steel 80mm downpipe (Made by Velocity Performance in Dallas. It has two o2 bungs and a piece of flex pipe. It's also heatwrapped)
80mm test pipe
JGS oil drain line (I'm including the 2 fittings, 1 is on the turbo, the other I haven't taken off yet)
Tial 38mm wastegate with the .5bar spring
WG dump tube (Made by Velocity Performance)
SARD Racing Blow-off Valve
Full hotpipe including all necessary couplers and clamps
Full coldpipe including all necessary couplers and all but 1 3" clamp
Air Intake pipe
z32 TT MAF with plug and necessary adapters
------------------------------
Here are the pictures
------------------------------
http://www.coldfire07.com/forums/turbosale/DSC02888.jpg
http://www.coldfire07.com/forums/turbosale/DSC02889.jpg
http://www.coldfire07.com/forums/turbosale/DSC02890.jpg
http://www.coldfire07.com/forums/turbosale/DSC02891.jpg
http://www.coldfire07.com/forums/turbosale/DSC02892.jpg
http://www.coldfire07.com/forums/turbosale/DSC02894.jpg
http://www.coldfire07.com/forums/turbosale/DSC02897.jpg
http://www.coldfire07.com/forums/turbosale/DSC02899.jpg
http://www.coldfire07.com/forums/turbosale/DSC02900.jpg
http://www.coldfire07.com/forums/turbosale/DSC02902.jpg
http://www.coldfire07.com/forums/turbosale/DSC02903.jpg
http://www.coldfire07.com/forums/turbosale/DSC02905.jpg
http://www.coldfire07.com/forums/turbosale/DSC02906.jpg
http://www.coldfire07.com/forums/turbosale/DSC02907.jpg
http://www.coldfire07.com/forums/turbosale/DSC02909.jpg
http://www.coldfire07.com/forums/turbosale/DSC02910.jpg
http://www.coldfire07.com/forums/turbosale/DSC02911.jpg
http://www.coldfire07.com/forums/turbosale/DSC02912.jpg
http://www.coldfire07.com/forums/turbosale/DSC02913.jpg
http://www.coldfire07.com/forums/turbosale/DSC02914.jpg
http://www.coldfire07.com/forums/turbosale/DSC02915.jpg
http://www.coldfire07.com/forums/turbosale/DSC02916.jpg
http://www.coldfire07.com/forums/turbosale/DSC02917.jpg
------------------------------
There are a few things that I should note regarding this setup.
The downpipe flex is broken at its end as you can see in the picture. I am pretty sure that a $5 3" exhaust clamp from summitracing will fix the problem and if not, you can get a weldless flex pipe to replace it for I believe $30.
The intercooler that I used is not being included, but it is pretty much the most common one available. It's a 24" x 12" x 3" intercooler and is available all over the place on eBay. Air filter is not included nor is the oil feed line.
The battery will need to be relocated as the coldpipe goes through the battery tray.
I have tried to include as much as possible in this package to make your installation as easy as possible. However, some bolts or fittings or vacuum lines may be missing.
The power steering reservoir needed to be moved a little bit. The stock lines will work just fine and I am including the bracket that I modified for free for your convenience.
------------------------------
These parts cost me over $2750 a few months ago, but I am willing to part with this package for $2100 shipped. I WILL NOT PART OUT THIS SETUP (yet) SO PLEASE DO NOT ASK. I accept PayPal or a money order for payment. Feel free to contact me with any questions at coldfire07 [at] gmail [dot] com or via AIM, my s/n is coldfire07.
We'll start off with the part list.
------------------------------
Garrett T3/T04E .57trim .63 a/r
Import-AutoPerformance T3 manifold
Custom made stainless steel 80mm downpipe (Made by Velocity Performance in Dallas. It has two o2 bungs and a piece of flex pipe. It's also heatwrapped)
80mm test pipe
JGS oil drain line (I'm including the 2 fittings, 1 is on the turbo, the other I haven't taken off yet)
Tial 38mm wastegate with the .5bar spring
WG dump tube (Made by Velocity Performance)
SARD Racing Blow-off Valve
Full hotpipe including all necessary couplers and clamps
Full coldpipe including all necessary couplers and all but 1 3" clamp
Air Intake pipe
z32 TT MAF with plug and necessary adapters
------------------------------
Here are the pictures
------------------------------
http://www.coldfire07.com/forums/turbosale/DSC02888.jpg
http://www.coldfire07.com/forums/turbosale/DSC02889.jpg
http://www.coldfire07.com/forums/turbosale/DSC02890.jpg
http://www.coldfire07.com/forums/turbosale/DSC02891.jpg
http://www.coldfire07.com/forums/turbosale/DSC02892.jpg
http://www.coldfire07.com/forums/turbosale/DSC02894.jpg
http://www.coldfire07.com/forums/turbosale/DSC02897.jpg
http://www.coldfire07.com/forums/turbosale/DSC02899.jpg
http://www.coldfire07.com/forums/turbosale/DSC02900.jpg
http://www.coldfire07.com/forums/turbosale/DSC02902.jpg
http://www.coldfire07.com/forums/turbosale/DSC02903.jpg
http://www.coldfire07.com/forums/turbosale/DSC02905.jpg
http://www.coldfire07.com/forums/turbosale/DSC02906.jpg
http://www.coldfire07.com/forums/turbosale/DSC02907.jpg
http://www.coldfire07.com/forums/turbosale/DSC02909.jpg
http://www.coldfire07.com/forums/turbosale/DSC02910.jpg
http://www.coldfire07.com/forums/turbosale/DSC02911.jpg
http://www.coldfire07.com/forums/turbosale/DSC02912.jpg
http://www.coldfire07.com/forums/turbosale/DSC02913.jpg
http://www.coldfire07.com/forums/turbosale/DSC02914.jpg
http://www.coldfire07.com/forums/turbosale/DSC02915.jpg
http://www.coldfire07.com/forums/turbosale/DSC02916.jpg
http://www.coldfire07.com/forums/turbosale/DSC02917.jpg
------------------------------
There are a few things that I should note regarding this setup.
The downpipe flex is broken at its end as you can see in the picture. I am pretty sure that a $5 3" exhaust clamp from summitracing will fix the problem and if not, you can get a weldless flex pipe to replace it for I believe $30.
The intercooler that I used is not being included, but it is pretty much the most common one available. It's a 24" x 12" x 3" intercooler and is available all over the place on eBay. Air filter is not included nor is the oil feed line.
The battery will need to be relocated as the coldpipe goes through the battery tray.
I have tried to include as much as possible in this package to make your installation as easy as possible. However, some bolts or fittings or vacuum lines may be missing.
The power steering reservoir needed to be moved a little bit. The stock lines will work just fine and I am including the bracket that I modified for free for your convenience.
------------------------------
These parts cost me over $2750 a few months ago, but I am willing to part with this package for $2100 shipped. I WILL NOT PART OUT THIS SETUP (yet) SO PLEASE DO NOT ASK. I accept PayPal or a money order for payment. Feel free to contact me with any questions at coldfire07 [at] gmail [dot] com or via AIM, my s/n is coldfire07.