View Full Version : Introducing ICHIBA USA Aluminum Wheel Spacer All Size Available!
ichibausa
05-26-2006, 11:32 AM
Closed.
New Thread http://www.zilvia.net/f/showthread.php?p=1196871#post1196871
kaotic
05-28-2006, 01:13 AM
what type of studs are provided in this kit??
ichibausa
06-02-2006, 11:08 AM
Before & After
http://site.ichibausa.com/Photos/WheelSpacer/wheel-spacer-before.jpg http://site.ichibausa.com/Photos/WheelSpacer/wheel-spacer-after.jpg
Nizzan4u2nv
06-19-2006, 12:57 AM
How long are the studs included with the 15mm pair for s14.
ichibausa
06-20-2006, 10:39 AM
How long are the studs included with the 15mm pair for s14.
Each stud is 60MM. :bigok:
trsilvias13
06-23-2006, 11:27 AM
would you sell just the longer stud for us who want extended wheel studs?
ayuaddict
06-23-2006, 08:03 PM
so the 15mm spacer comes with a 60mm stud, which means....the exposed thread section is only 3 mm longer than stock...are they available with longer ones? say 70mm?
SlimDrifter
06-26-2006, 01:19 AM
these prices are for 2 spacers or 1? im guessing 2, am i right?
zero.counter
06-26-2006, 01:33 AM
these prices are for 2 spacers or 1? im guessing 2, am i right?
Good question.
Revup Performance
06-26-2006, 05:50 PM
these prices are for 2 spacers or 1? im guessing 2, am i right?
yes this is for the pair of spacers, not 1.
Thanks.
Revup Performance
06-26-2006, 05:50 PM
would you sell just the longer stud for us who want extended wheel studs?
Sorry we do not just sell the studs out of the kit, but however I can get you extended studs from Nismo, if you are interested.
Thanks.
MiamiGrinch240
07-01-2006, 02:50 AM
Something I wonder about hubcentric spacers. It's 66.2 on the side with the hub but if u use aftermarket wheels like most people do, the size u need where the wheels mount is 73.1 or so. So then u gotta buy hubcentric rings just to make them get a good fit. That's what I had to do when I bought some 15mm hubcentric spacers a couple years back and it sucked to have to do that.
Unless u can order these with 66.2 on the inside and 73.1 on the part the wheels mounts to?
slow_sr20
07-01-2006, 10:05 AM
i would love to have a set of theese spacers and studs but everytime i try and checkout it gives me and error and won't let me get past the delivery information page. am i retarted? the error reads-error_no_shipping_selected_selected
whats the deal? :bash:
hybrid_eg
07-02-2006, 07:35 PM
do you have them in 10mm size?
Dutchmalmiss
07-03-2006, 12:18 PM
how long are the studs for the 25mm spacers??
ichibausa
07-03-2006, 01:35 PM
i would love to have a set of theese spacers and studs but everytime i try and checkout it gives me and error and won't let me get past the delivery information page. am i retarted? the error reads-error_no_shipping_selected_selected
whats the deal? :bash:
Did you checkout from www.ichibausa.com or you went to one of our dealer's site?
ichibausa
07-03-2006, 01:36 PM
do you have them in 10mm size?
Sorry, we don't have the 10MM yet. It's coming soon .....
slow_sr20
07-05-2006, 12:48 PM
Did you checkout from www.ichibausa.com or you went to one of our dealer's site?
yeah i was trying to order fom revup online, so i just ordered direct.
ichibausa
07-13-2006, 11:58 PM
yeah i was trying to order fom revup online, so i just ordered direct.
They fixed it. :coolugh:
ichibausa
07-20-2006, 11:25 AM
How To Measure?
The widest point of your tire and wheel combination is usually the outside diameter of the tire sidewall. Using a ruler with the straight edge flush with the face of the tire, measure the gap between the outer face of the tire to the inside lip of the fender as shown in the diagram. This will determine the thickness of the spacer you will need.
http://site.ichibausa.com/Photos/measure_small_s.JPG
5MM = 0.197 INCH
8MM = 0.313 INCH
10MM = 0.393 INCH
12MM = 0.473 INCH
15MM = 0.590 INCH
20MM = 0.787 INCH
25MM = 0.983 INCH
sw20>>s14
07-21-2006, 04:32 AM
Something I wonder about hubcentric spacers. It's 66.2 on the side with the hub but if u use aftermarket wheels like most people do, the size u need where the wheels mount is 73.1 or so. So then u gotta buy hubcentric rings just to make them get a good fit. That's what I had to do when I bought some 15mm hubcentric spacers a couple years back and it sucked to have to do that.
Unless u can order these with 66.2 on the inside and 73.1 on the part the wheels mounts to?
good question, do you guys offer/plan to offer wheelcentric and hubcentric spacers for nissans? btw miamigrinch, you'd most likely have to get hub rings for 99.9% of aftermarket rims out there anyway, so its no trouble, but IMO it would be nice if there were less loose pcs and one pc of metal took care of everything...
slow_sr20
07-24-2006, 03:22 PM
how long are the studs supposed to be with the 5mm kit?
ichibausa
07-25-2006, 03:23 PM
how long are the studs supposed to be with the 5mm kit?
the Thread length is 35MM
slow_sr20
07-26-2006, 03:31 PM
o.k. well are they supposed to be the same length as the other kits? because with a digitial caliper they ( the ones that came with my 5mm kit) only measure 53.xx mm (end to end) -looks to be the same length as stock-can i exchange theese for longer ones? or did i get incorrect studs with my kit?
ichibausa
08-01-2006, 04:44 PM
o.k. well are they supposed to be the same length as the other kits? because with a digitial caliper they ( the ones that came with my 5mm kit) only measure 53.xx mm (end to end) -looks to be the same length as stock-can i exchange theese for longer ones? or did i get incorrect studs with my kit?
I don't think it's incorrect studs. You can go ahead put our studs. Try It First! :coold:
sw20>>s14
08-01-2006, 08:40 PM
is there an ETA on the 10mm spacers?
ichibausa
08-02-2006, 11:09 AM
is there an ETA on the 10mm spacers?
We are going to test on 10MM next week, so hopefully next month should have them done. ;)
MiamiGrinch240
08-09-2006, 08:16 PM
good question, do you guys offer/plan to offer wheelcentric and hubcentric spacers for nissans? btw miamigrinch, you'd most likely have to get hub rings for 99.9% of aftermarket rims out there anyway, so its no trouble, but IMO it would be nice if there were less loose pcs and one pc of metal took care of everything...
I guess we don't get a reply?
ichibausa
08-09-2006, 08:50 PM
I guess we don't get a reply?
Our spacers are hubcentric already. We are planning to get some extra hub rings for aftermarket wheel due to some customers requested. We will post up once we got them.
Update News:
For the customers who interested in 10MM, they are coming soon. Also will post up when they come in. Thanks for all!
sw20>>s14
08-10-2006, 05:04 PM
For the customers who interested in 10MM, they are coming soon. Also will post up when they come in. Thanks for all!
yes! yes! please be soon...like very very soon! i need them for a track day on sept 1st...are they gonna be available by then? please keep up posted, thanks...
BOROSUN
08-26-2006, 03:40 AM
where is the 20mm for s13 4x114.3?
ryan hagen
08-26-2006, 03:24 PM
if i order the 15mm and 5 mm kit, can i get all the studs for the length of the 15mm kit? i havce a bunch of random wheels so the 15mm spacers will move from the front to the back alot.
ichibausa
08-27-2006, 10:48 PM
where is the 20mm for s13 4x114.3?
Sorry, we don't have 20MM for S13 at this moment.
ichibausa
08-27-2006, 10:49 PM
if i order the 15mm and 5 mm kit, can i get all the studs for the length of the 15mm kit? i havce a bunch of random wheels so the 15mm spacers will move from the front to the back alot.
Go ahead to order, I will try to swap the studs for you. ;)
MiamiGrinch240
09-01-2006, 02:53 AM
Also interested in the 10mm spacers. :)
94_240sx
09-01-2006, 07:48 AM
We are going to test on 10MM next week, so hopefully next month should have them done. ;)
It's September and can you give us update on 10mm spacers? I need them ASAP. Thanks!!!
ichibausa
09-05-2006, 03:15 PM
It's September and can you give us update on 10mm spacers? I need them ASAP. Thanks!!!
Hi, the 10MM is not out yet. They are still on pending. :smash:
MiamiGrinch240
09-06-2006, 03:33 AM
How much longer do u think it will take for the 10mm ones?
And how much will they be?
ryan hagen
09-08-2006, 05:52 AM
i just ordered from your site, i need 15mm 5 lug spacers for the rear of a s14 95-98. thanks, the payment will be from jan hagen. the studs are differnt for front and rear and i didnt see a selection area.
Revup Performance
09-08-2006, 10:35 AM
i just ordered from your site, i need 15mm 5 lug spacers for the rear of a s14 95-98. thanks, the payment will be from jan hagen. the studs are differnt for front and rear and i didnt see a selection area.
Got your order Ryan, I sent you emails asking for which lug, but I got the info already, 5 lug correct. I will ship out your spacers today, thanks again!!!!!!!!
MiamiGrinch240
09-10-2006, 09:22 PM
How much longer do u think it will take for the 10mm ones?
And how much will they be?
Good questions... I'd like to know too.... ;)
ichibausa
09-15-2006, 11:35 AM
Good questions... I'd like to know too.... ;)
The item is still pending, not out yet. ;)
We don't know the price until the shipment come in. :eek3d:
BOROSUN
09-18-2006, 11:24 PM
what about the 20mm 4lug?
when is it going to be available?
ichibausa
09-19-2006, 11:59 PM
what about the 20mm 4lug?
when is it going to be available?
We don't have plan to get the 20MM 4-lug yet.
MiamiGrinch240
09-20-2006, 02:25 PM
The item is still pending, not out yet. ;)
We don't know the price until the shipment come in. :eek3d:
Are we looking at a couple more weeks or a couple more months for the 10mm 5x114.3
ichibausa
09-21-2006, 02:37 AM
Are we looking at a couple more weeks or a couple more months for the 10mm 5x114.3
I would say around 1 month or 2 :smash:
sw20>>s14
09-21-2006, 02:48 AM
1 or 2 months???!!! gsus, i was told mid to end of sept...whats the hold up? you dont have a real eta by the manufactuer(s)?
ryan hagen
09-21-2006, 06:01 PM
the spacers are great, unfortuantely i cant use them, the knurling of the wheel studs was for the the front, so i have long studs on the front,but i needed spacers on the rear so i need to buy some for the rear so i can use them spacers.
ichibausa
10-17-2006, 01:00 PM
New Update:
S13
5MM: Instock
15MM: Instock
25MM: Instock
S14
5MM: Instock
15MM: Instock
20MM: Out Of Stock (Coming NOV 2006)
25MM: Out Of Stock (Coming NOV 2006)
S13 10MM: New Item In Development
S13 20MM: New Item (Coming NOV 2006)
S14 10MM: New Item (Coming NOV 2006)
http://site.ichibausa.com/Photos/WheelSpacer/IMG_1024.JPG
ryan hagen
10-17-2006, 10:51 PM
the knurling on the wheel studs seems soft too, i had 2 get the knurling strip out on me the second time i put wheels on it, the knurling just twisted off and i had to torch one stud off and use a pry bar and vise grip to get one off at the track, i m replace all the studs with peak studs.
ichibausa
10-18-2006, 02:08 AM
the knurling on the wheel studs seems soft too, i had 2 get the knurling strip out on me the second time i put wheels on it, the knurling just twisted off and i had to torch one stud off and use a pry bar and vise grip to get one off at the track, i m replace all the studs with peak studs.
That's the only case we heard so far, but you can always change aftermarket extended studs.
I guess it's factory defected for that stud.
Thanks for your update!
94_240sx
10-20-2006, 07:32 AM
S13 10MM: New Item In Development
Dang... Any ETA? I'm looking for 4x114.3 for S13. I just installed 50mm Nismo studs and am waiting for 10mm spacers.
ichibausa
10-20-2006, 12:02 PM
Dang... Any ETA? I'm looking for 4x114.3 for S13. I just installed 50mm Nismo studs and am waiting for 10mm spacers.
Hopefully we will get that information next week.
94_240sx
10-20-2006, 03:25 PM
Hopefully we will get that information next week.
Please post here if you find out something. I'm sure some people are very interested...
ichibausa
11-06-2006, 03:38 PM
:bigok: 10MM Sample just installed, everything is perfect!
The shipment is coming very soon. :bigok:
http://site.ichibausa.com/Photos/WheelSpacer/S134lugspacers.jpg
94_240sx
11-08-2006, 10:43 AM
Wow!! Finally there. Looking good!!! Yeah, please let us know when you get them. Thanks for the update.
DoriftoPnoy
11-20-2006, 02:17 AM
what's the thread pattern on the studs? are they still stock 12 x 1.25?
sr420det
11-20-2006, 08:03 AM
hey. do you guys have a 20mm spacer for 4:114.3?
ichibausa
11-20-2006, 11:12 AM
what's the thread pattern on the studs? are they still stock 12 x 1.25?
They are same bolt size, but the length will be longer than stock.
ichibausa
11-20-2006, 11:14 AM
hey. do you guys have a 20mm spacer for 4:114.3?
The 20MM 4lug is coming with this container. Very soon!
DoriftoPnoy
11-21-2006, 06:42 AM
do you guys welcome customers to your store? I'm thinking about stopping by on wednesday. Do you have 15mm spacers for the s14 5-lug in stock? And your store is that address in your sig right?
ichibausa
11-21-2006, 11:30 AM
do you guys welcome customers to your store? I'm thinking about stopping by on wednesday. Do you have 15mm spacers for the s14 5-lug in stock? And your store is that address in your sig right?
Sorry, we don't deal with retail walk in customers directly. You can always buy from our dealers and most of them have showroom too.
Also you can order from our website and you can get it within 2 business days.
myzislow
11-27-2006, 08:38 AM
any updates on 10mm s14 yet?
ichibausa
12-11-2006, 08:11 PM
any updates on 10mm s14 yet?
Don't worry, we will have shipment very very soon. Sorry for the long wait but it's a good project to develop the 10MM for nissan drivers! :bigok:
AuburnRyan
12-14-2006, 01:36 PM
Our spacers are hubcentric already. We are planning to get some extra hub rings for aftermarket wheel due to some customers requested.
Ichibausa - Your spacers larger than 5 mm have a lip - the inside of that diameter is 66.2, making it hubcentric.
What is the outside diameter? That way we know what wheel centric rings to buy, or if we need any at all...
ichibausa
12-14-2006, 03:05 PM
Ichibausa - Your spacers larger than 5 mm have a lip - the inside of that diameter is 66.2, making it hubcentric.
What is the outside diameter? That way we know what wheel centric rings to buy, or if we need any at all...
The inside & outside diameter is same size 66.2 :bigok:
AuburnRyan
12-16-2006, 08:57 PM
The inside & outside diameter is same size 66.2 :bigok:
Physically Imposible:aw: There's a "lip"...but thank for the response :)
If the lip is say 2 mm thick, than the outside diameter would be 4 mm larger than 66.2
There lip is there for the wheels to mount on, correct? This is where you'd place a centering ring for the wheels if needed...
element728
12-17-2006, 06:57 PM
Physically Imposible:aw: There's a "lip"...but thank for the response :)
If the lip is say 2 mm thick, than the outside diameter would be 4 mm larger than 66.2
There lip is there for the wheels to mount on, correct? This is where you'd place a centering ring for the wheels if needed...
This is possible. The inside diameter is not all the way through the lip.
ichibausa
12-28-2006, 05:32 PM
10MM is available Now!
ichibausa
12-29-2006, 12:05 PM
New Thread!
http://www.zilvia.net/f/showthread.php?p=1196871#post1196871
Gepeto
02-08-2008, 05:38 PM
Do you have anything for the REAR of a 4lug s14 ?
S13 4lug fits the front of a s14 but not the rear..
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.