PDA

View Full Version : TRANNY INSTALLED. . need help =(

Hi-PeR
05-23-2006, 04:40 PM
alrite first off ill give u guys a link to the picture for reference . . .
http://www.zilvia.net/f/showthread.php?t=110089 (2nd picture down)
i installed the tranny but now that rubber ending is sitting right up on the drive shaft and wud grind hella much if i turned it on. . ne suggestions on how to remove it... or wut it even is??? thank u!
infinitexsound
05-23-2006, 04:59 PM
u mean the rubber sleeve shit at the back where the driveshaft plugs into? its rubbing against the drive shaft?
EchoOfSilence
05-23-2006, 05:15 PM
sounds like you have the wrong driveshaft, man
Hi-PeR
05-23-2006, 11:03 PM
i dunt think its my drive shaft. . . because my last tranny didnt have that rubber part.. . and we bought a new tranny not a new drive shaft.
infinitexsound
05-23-2006, 11:41 PM
just bend it so it doesnt rub problem solved........
fliprayzin240sx
05-24-2006, 12:54 AM
Just take the damn thing off. ITs a S14 tranny, S13 drive shafts are different from the S14 driveshafts thats why your S13 drive shaft is hitting it. Just pop the rubber dust boot off, you dont really need it anyways...

I take that shiet off everytime i do SR swaps...Im not even running it on my S13 cuz my the boot somehow warped itself and my drive shaft decided to eat it.
infinitexsound
05-24-2006, 02:31 AM
ray since when did u get a s13?
koukidough
05-24-2006, 09:41 AM
get a dremel tool and trim the dust boot in half. If you dont own one, a saw would be fine. The metal is thin so it shouldn't take you more than 5 minutes to saw it in half. I have done this many times and its always better to keep half of your dust boot then none at all. You dont want dust in there that might clog your bearings over time do you?

http://mysite.verizon.net/res7q23b/dustboot.jpg
I could have easily did it with a dremel tool but I didnt want to waste the bit (expensive ass hell!!!) So I just sawed it off, took about 3 minutes.
HyperTek
05-24-2006, 10:03 AM
yup i did smae thing for sr swap.. just trim where it needs to be.
Hi-PeR
05-24-2006, 04:23 PM
Thanks for the advice. . i will get it done.. wooohoo!
mrmephistopheles
05-24-2006, 04:37 PM
or just swap the one from the S13 transmission over.
fliprayzin240sx
05-25-2006, 12:45 AM
ray since when did u get a s13?

yah bory, ive never done SR swaps into S13s...:mepoke:
infinitexsound
05-25-2006, 01:51 AM
Im not even running it on my S13 cuz my the boot somehow warped itself and my drive shaft decided to eat it.eh? i think im confused dude........