Wheel offset..... I know flame away.

[brainfood]

I am thinking about adding aftermarket lips to my bbs rs's and by my calculations my total width and offset after the new lips would be 17x9.5 +12 and 17x10.5 +2 anyone run anything close to this? I run -1.4 rear and -2.6 front for camber and right now fenders are just rolled but I know I will need a pull or overfenders just looking for pics of something close I dont know how extreme it will be. thanks! sorry I know people hate offset threads and blah blah.

[Dousan_PG]

i run those sizes..almost
9.5 +12 up front w/ origin wide front fenders and -2.5 camber
rear i run 10.5 +15 w/ a 3mm spacer and 30mm over fenders and -1.5 camber
235 and 245 tires.


you'll need over fendrers for the rear for sure.
fronts..might be able to pull off stock, depending if u dont mind running MORE camber then u currently do. -3.5 ish should be enough depending on tire size.

[brainfood]

i run those sizes..almost
9.5 +12 up front w/ origin wide front fenders and -2.5 camber
rear i run 10.5 +15 w/ a 3mm spacer and 30mm over fenders and -1.5 camber
235 and 245 tires.


you'll need over fendrers for the rear for sure.
fronts..might be able to pull off stock, depending if u dont mind running MORE camber then u currently do. -3.5 ish should be enough depending on tire size.
Thanks Aaron, what overfenders (brand) do you run? Are you going to be there Sat? If so I will just check out fitment then.
edit: I was probably going to run 225f and 245r so that would give me a little more clearance anyway, but after long beach I think I will be running overfenders in the rear :)

[Dousan_PG]

nah my motor is dead.
haha
im rebuliding it right now
pics nah nothing relaly
i dotn run the 17x9.5 +12s much, i run the 17x9 0 most of the time. rears i always use the 118x10.5 +15s w/the spacer
um..if i hve time this weekend i can take pics and post it up. i think...no my canr isnt on the 9.5s right now only th e9s

but u can see the rear

i use shit fitment rears made by AIT
what junk
ORIGIN rears are WAY better, my friend has those.
AIT is..decent..at best. it works. not proud of it

[brainfood]

nah my motor is dead.
haha
im rebuliding it right now
pics nah nothing relaly
i dotn run the 17x9.5 +12s much, i run the 17x9 0 most of the time. rears i always use the 118x10.5 +15s w/the spacer
um..if i hve time this weekend i can take pics and post it up. i think...no my canr isnt on the 9.5s right now only th e9s

but u can see the rear

i use shit fitment rears made by AIT
what junk
ORIGIN rears are WAY better, my friend has those.
AIT is..decent..at best. it works. not proud of it

Thats cool whenever you get a chance to post pics it wont be a rush, 2 mo. till my new wheels come from Japan and then if I decide to order aftermarket deep lips then probably another mo. + for those from the u.k. :) Just trying to figure out if I am going to run overfenders or fix the bent quarter.