futureteg
05-17-2006, 08:33 PM
Racing Gear JTC'N1 coil overs $1000 OBO
-very rare JDM coil overs, 1 of like 3-4 sets in the whole country that I know off, like someone mentioned in the post on another forum, the only time you see Racing Gear is on dedicated race cars.
-spring rates are 8/6k, damper non adjustable, but they are valved really nicely
-please do not compare these to teins because as it was mentioned before, Tein is like the APC brand in japan for coilovers.
-$2900 AU new: http://www.c-red.com.au/parts/rg/suspension.shtml
2,900.00 AUD Australia Dollars = 2,209.22 USD, if bought new, so keep that in mind when throwing out offers.
-these coilovers are very reliable because of the twin tube design,So the gas pressure is kept low, in comparison to a single tube system, which means there is less friction generated. The body of the coilover is made of aluminum which makes the unit light weight. The material is 4mm in the barrel, which guarantees superior strength and little deformation from heavy impacts.
-A major feature with the unit is the height adjustment, both from the spring platform and the bottom mount - a screw system that allows the bottom mount to adjust in height. Adjusting height in the spring platform allows for certain damping changes by preloading the spring in the unit and with the included adjustable camber tops, camber chambers can be setup for your specific ride.
http://mycollegecar.com/DSC04348.JPG
PM or email at [email protected]
shipping should be $50 bucks
-very rare JDM coil overs, 1 of like 3-4 sets in the whole country that I know off, like someone mentioned in the post on another forum, the only time you see Racing Gear is on dedicated race cars.
-spring rates are 8/6k, damper non adjustable, but they are valved really nicely
-please do not compare these to teins because as it was mentioned before, Tein is like the APC brand in japan for coilovers.
-$2900 AU new: http://www.c-red.com.au/parts/rg/suspension.shtml
2,900.00 AUD Australia Dollars = 2,209.22 USD, if bought new, so keep that in mind when throwing out offers.
-these coilovers are very reliable because of the twin tube design,So the gas pressure is kept low, in comparison to a single tube system, which means there is less friction generated. The body of the coilover is made of aluminum which makes the unit light weight. The material is 4mm in the barrel, which guarantees superior strength and little deformation from heavy impacts.
-A major feature with the unit is the height adjustment, both from the spring platform and the bottom mount - a screw system that allows the bottom mount to adjust in height. Adjusting height in the spring platform allows for certain damping changes by preloading the spring in the unit and with the included adjustable camber tops, camber chambers can be setup for your specific ride.
http://mycollegecar.com/DSC04348.JPG
PM or email at [email protected]
shipping should be $50 bucks