PDA

View Full Version : FULL S14 SR20DET Motorset/Tranny/Aftermarket Part Out!! SoCal


jdm_s14_zenki
05-16-2006, 05:06 PM
Ok guys, blew the head gasket...warped the head, and block. Instead of rebuilding the block to redeck the block, Ive decided to swap in another S14 SR20. This is what i have for sale.

This longblock is an S14 SR20DET (KOUKI, not ZENKI)

S14 long block: As of right now, the head is off the block which will make it easier to part out. Everything is there.
-The block was REBUILT with ALL NEW OEM PARTS 3 WEEKS AGO
-all 4 pistons have about 500 miles on it. I can show you paperwork, just ask me.
-All rod bearings 500 miles.
-All pison rings 500 miles.
-Original Crank nothing wrong
-Original Rods, nothing wrong
-The block will need a redeck.
-The head will need a redeck and heli-coil on the cam bracket.

-The head comes equipped with port and polish, Ferrea stainless valves, Tomei bronze valve guides, all have less then 2000 miles on them.

-Cams are actually comming from my new motorset. Nothing wrong (i just swaped in the todas)
-Same with cam sprockets, valve springs, ect.
--Rocker arms are all there
Waterpump, oilpump, pullies, belts, everything all there.
-Intake manifold has been ported and works awesome
-Exhaust manifold is stock and has also been ported/polished.
-T28 turbo in great condition.
-S14 SR20DET 5spd Tranny, very good condition. Just got it off my other motor.
-S14 SR20DET (kouki) ECU
-Ignitor chip
-S14 SR20DET Motor Harness wired for 96 Zenki

-Anything else im forgeting just let me know, i probly have it. THis is a FULL motorset part out. I have everything.

Please either email me at [email protected]
PM me, or reply in this thread.

Im in socal and will of course take local buyers first. I will update this thread as needed, pm me for prices...i will have to see what everyone else is selling these items for.

Ok, saw what everyone else is selling these parts for so this is what i came up with. If u think the price is too high, then go on your merry way and dont post in my thread.

$200 for the Tranny
$350 for the complete head
$900 for the complete block.

Everything else, just make a DESCENT offer. All you crazy lowballers, dont even bother pming me. ($125-$150 for an S14 Tranny that just came off a clip is what i mean by CRAZY lowballing.)

Slidin240Wayz
05-16-2006, 06:30 PM
pm me a price for the head and block seperately please. 07083

jdm_s14_zenki
05-16-2006, 07:44 PM
pm sent, lemme know.

jdm_s14_zenki
05-17-2006, 01:23 PM
The sale is off. Check out the Cars for sale section. im selling the whole car now.

s13soto
09-12-2006, 02:09 AM
150 $ for sr tranny want to buy email me for namber my email is [email protected] pls need tranny bad
thx

Hailtothesilvia
09-12-2006, 03:30 AM
I want the turbo PM sent

wvustud2003
09-12-2006, 03:32 PM
Ok guys, blew the head gasket...warped the head, and block. Instead of rebuilding the block to redeck the block, Ive decided to swap in another S14 SR20. This is what i have for sale.

This longblock is an S14 SR20DET (KOUKI, not ZENKI)

S14 long block: As of right now, the head is off the block which will make it easier to part out. Everything is there.
-The block was REBUILT with ALL NEW OEM PARTS 3 WEEKS AGO
-all 4 pistons have about 500 miles on it. I can show you paperwork, just ask me.
-All rod bearings 500 miles.
-All pison rings 500 miles.
-Original Crank nothing wrong
-Original Rods, nothing wrong
-The block will need a redeck.
-The head will need a redeck and heli-coil on the cam bracket.

-The head comes equipped with port and polish, Ferrea stainless valves, Tomei bronze valve guides, all have less then 2000 miles on them.

-Cams are actually comming from my new motorset. Nothing wrong (i just swaped in the todas)
-Same with cam sprockets, valve springs, ect.
--Rocker arms are all there
Waterpump, oilpump, pullies, belts, everything all there.
-Intake manifold has been ported and works awesome
-Exhaust manifold is stock and has also been ported/polished.
-T28 turbo in great condition.
-S14 SR20DET 5spd Tranny, very good condition. Just got it off my other motor.
-S14 SR20DET (kouki) ECU
-Ignitor chip
-S14 SR20DET Motor Harness wired for 96 Zenki

-Anything else im forgeting just let me know, i probly have it. THis is a FULL motorset part out. I have everything.

Please either email me at [email protected]
PM me, or reply in this thread.

Im in socal and will of course take local buyers first. I will update this thread as needed, pm me for prices...i will have to see what everyone else is selling these items for.

Ok, saw what everyone else is selling these parts for so this is what i came up with. If u think the price is too high, then go on your merry way and dont post in my thread.

$200 for the Tranny
$350 for the complete head
$900 for the complete block.

Everything else, just make a DESCENT offer. All you crazy lowballers, dont even bother pming me. ($125-$150 for an S14 Tranny that just came off a clip is what i mean by CRAZY lowballing.)

how much do you want for the t28 turbo. i need one bad for my sr?? and do you accept paypal.???

Dousan_PG
09-12-2006, 03:52 PM
ill give u 150 for the tranny AND pick it up locally just make the fluid is drained
i can pick it up fridaynight after 9pm
lmk
thanks

jdm_s14_zenki
09-12-2006, 09:03 PM
wow, look at the date of this post. i guess its my fault for not posting "sold"

Hailtothesilvia
09-13-2006, 12:30 AM
now i feel like a dumbass

jdm_s14_zenki
09-13-2006, 01:43 PM
lemme have ur GTR grill :/

Hailtothesilvia
09-13-2006, 03:23 PM
lemme have ur GTR grill :/
i'll trade for the T28 if u still have it :)

TooFartyS14
09-13-2006, 11:15 PM
damn i need that t28 too tao

SRd240sx
09-14-2006, 02:37 AM
ill give u 150 for the tranny AND pick it up locally just make the fluid is drained
i can pick it up fridaynight after 9pm
lmk
thanks

$150 haha go home, u poor kid