92 S13 Motor (or partout) and stock diff

[Id-]

I just pulled a motor out of my 92 base coupe because it had a bad bearing. Was making a weird noise, but seemed to run ok. Burned a little oil.

The only thing missing on it is the oil pan. I have an extra one; but it has a hole in it from when I welded a return bung on it; but it happened to be in the wrong spot lol.

I'm most likely going to part out the motor; because I'll get more out of it that way.

I've got everything on the motor tho, sans the harness and obviously no transmission:
Cams, sprockets, Throttle body, injectors + fuel rail + fuel pressure regulator, intake mani, distributor, exhaust mani (have 3 of these!) head, etc.
I have another head that is nearly complete. Its missing the cams, caps, and the little metal covers that sit on top of the valves. Make me an offer on it.

I'll take offers on the whole thing or if there's a specific part you want, let me know.

I also have the stock diff and stock axles that I pulled from the car. I swapped with a J30 VLSD, and consequently had to swap my stock cover. So the cover it will come with will be the 2-bolt S14-style cover. I also have the stock axles. All of it is in great shape.

S13 cams: $65 shipped
Distributor(minus cover): $65 shipped
TB: $50 shipped
Exhaust mani: $20+shipping
Complete Head: $150 shipped
Stock Diff: $75 + shipping
Fuel rail + injectors + FPR: $75 shipped

[zads]

How much for the intake manifold, and where are you located?

[Id-]

How much for the intake manifold, and where are you located?

I'm in Mobile, AL. I don't really have a set price on that part :) I'm thinking $30 + shipping?

[Id-]

Bump. Make offers guys. This crap is taking up space in the car port.

[BRB240]

I'll take the MAF Sensor. PM me how you would like to make the transaction.

[dopeassjackson]

where are you located and how much for intake mani, full head, full block.

[undesiredshoe]

whats up with the harness?? Are you selling it?? Because if you are, how much shipped?

[oneslows14]

everyone says s13 is this a us or jdm

no s13 us its 240sx
jdm is s13
so if its a sr20det wich is a s13 ill take some parts cas, maf thanks...
[email protected]
dont know if i already talked to you?

[240SeXy_man]

its a twin cam KA correct? how much for the injectors and fuel rail?

[Id-]

whats up with the harness?? Are you selling it?? Because if you are, how much shipped?

Harness didn't come off the motor; it stayed. I DO have another harness though. It was cut right before the coil pack; some moron in a junkyard did it. Therefore its missing everything that connects to the coilpack.

FYI: engine is located in Mobile, AL

sorry for the late PM replies; I've been out of touch

[Id-]

Ok! Finally got car finished so I can now focus on selling the old parts!!!

Prices updated! If you think something is too expensive; please PM me! I need to get rid of this stuff; its taking up a lot of space.

[Id-]

I'm going to have to start putting stuff on ebay soon; I'd rather not :)